AVS Forum banner
delay
1-10 of 10 Results
  1. Receivers, Amps, and Processors
    Hello everyone, Not sure where to post this one since it straddles the fence between equipment and REW, but here it goes. I have the Denon AVR-S540BT. It's pretty basic, I know, but it usually gets the job done. However, I have been playing with REW with the UMIK-1, and I have noticed that I do...
  2. LCD Flat Panel Displays
    Way back in 2014, I had a Viewsonic 37" that eventually acquired the problem of where the TV didn't respond to the remote until 5 minutes after TV is on. Kind of like the TV has to "warm up" before it responds to the remote. I always thought it was "just that TV". We then moved to Nashville in...
  3. Audio Theory, Setup, and Chat
    Hello, I'm using an HDMI extractor to send the video to a project, and send the audio, through a Bluetooth transmitter to a soundbar. The setup works, but the audio is ahead of video, by maybe 300-500 mS. I'm not sure where the delay comes from, I'm guessing it's from the extractor. Has anyone...
  4. Receivers, Amps, and Processors
    My Onkyo has started to delay when power on receiving any type of HDMI signal. Fire Box, Nintendo, Directv. Both HDMI slots act like this. I haven tried a different type of input yet. Usually takes a couple minutes to receive the signal and starts to work. Any advice? My father thinks it might...
  5. Receivers, Amps, and Processors
    To all owners of modern receivers, I wonder if you have encountered something like this: When Input Source material is set to Bitstream Dolby TrueHD/Atmos, the decoding overhead on the Receiver side seems to be so high that it affects the speed at which OSD is updated. On my brand new...
  6. Receivers, Amps, and Processors
    Hi, I have a problem with intermittent audio delay of approximately 0.5 - 1 seconds when audio plays from my PC (Windows 10) through HDMI 2.0 cable into my Pioneer VSX-1131 (into the HDCP 2.2 socket). The problem is noticable when playing songs on Spotify and Spotify automatically goes to the...
  7. HDTV Technical
    Hello, I have a problem. I have a Samsung 60" pn60f5300af, moto box vip 1225, a Samsung soundbar hw-f550. The uverse box is hooked directly to input 1 on the tv, the soundbar is signaled from the optical out port on the tv. I do have Apple TV and blu Ray hooked into an hdmi switch going to...
  8. Audio Theory, Setup, and Chat
    I have four outdoor Klipsch speakers hard-wired to my receiver. I'm using a Nuvo Simplese to transfer audio to those speakers. Unfortunately, due to close proximity to neighbors, I can't raise the volume to adequately hear audio at the rear of our patio area. In lieu of running additional...
  9. DVD Players (Standard Def)
    I have a 720p television and no blu-ray or HD DVD media. What I do have is about 1,000 redbook DVDs on physical discs and another 650 or so on a hard drive. What I'd like is a player (it can be blu-ray, too), that is reliable and good at error correction and flexible about the type of blank...
  10. Receivers, Amps, and Processors
    I have a Samsung un50f6300 TV. I just set up a Yamaha RX-V675 with Andrew Jones Pioneer towers satellites and center and an Outlaw Audio LFM-1 Plus Sub. I finally got everything setup and working okay. Speakers are calibrated and sounding good. However, the audio from the receiver is faster...
1-10 of 10 Results
Top