I have a Denon AVR-2312CI and have always just used the speakers connected to the amp. However, recently I bought a wireless HDMI transmitter, so I would like to send the HDMI signal (audio and video) coming out of the receiver to the HDMI transmitter (so I can then watch the signal elsewhere...

I recently had to have my 3312ci looked at for repair. The repair facility decided it wasn't worth fixing or too costly, so they referred it back to Denon for a suitable replacement. I was just recently contact by Denon and told that I will be receiving a refurbished AVRX4000 for my...

Why I want to upgrade, I have no idea. Was looking at the Onkyo 818 or the Pioneer SC-61. Any reason to pull the trigger or just leave well enough alone

Hello all, I have a denon 2313 which is doing well in a home theatre system. I am used to having a separate music only system, but budget does not allow that any longer (kids don't need food do they????). So I want to drive a 2-channel music only system from the 2313. I am ready to buy...

 Have just purchased Denon AVR-X2000 & can’t find a setting that allows tuner, internet radio, music etc with TV off. What I want is blank screen, or screen turns off when sound only source. Or it times out to blank after a while.   If I have tuner, www radio, etc going there’s always an...

I got a used JVC X70 in 2012 and the new theater was completed in late 2012. Everything worked great. I eventually replaced the used bulb in April 2013 and everything worked great. One day last week I turned on the projector and it displayed a bizzare pattern of colors. Instead of trying to...

Hey Guys, I am in the process of researching / purchasing a new receiver. Right now I am using my Onkyo TX-SR605 that I have had for several years. The Onkyo has been pretty good to me with no issues so far. (May have a zone 2 issues but haven't traced it yet) While this Onkyo has been...

 sir,     my remote for sound bar is misplced.i want u suggest me a least expensive universal remote for philips hsb 2313a/f7 sound bar.i can get the codes from philips website.what i fear is that these universal remotes might not support all functions.suggest me a one which supports all...

I just completed my home theatre setup and am now faced with an overheating issue. I have a Denon 2313 receiver, an HTD 1240 amp and 6 pair (a pair in 3 different rooms) of Monoprice 8 1/2inch ceiling speakers connected to 3 volume controls. So here is the issue; when I power up zone 2 on the...

Here's my setup: Denon 2313 Reciever HTD 1240 Amp 3 pairs Monoprice 8 1/2 inch celing speakers 3 Monoprice 100w volume controls I started hooking up the first pair of ceiling speakers - got everything wired correctly (I think). The speakers are emitting audio, but at a very low volume. I...

First, off, let me state that I am not new to audio and realize the science of +3dB is considered twice as much power via the doubling of voltage at a given load, and that +10dB is the standard for audible doubling of output which means it would take a good deal of 'additional' power to achieve...

First let me say sorry for making another one of these "which should I buy" threads... A little background: I've been using the same over 10 year old Sony receiver and am finally looking to upgrade since I recently purchased a 65" Panasonic VT60. So, I've only been getting regular DTS or...

 Hi, experts, Today I tried to setup legit refurbished unit after replacing old unit AVR 988. All source devices with HDMI work all fine. But I need to hook up one with component output. I tried manual assignment of input, tried setup assistant, reset micro processor,etc. but no luck Also I...

 Hi, all I just got subject unit to replace older AVR988(was good work horse in it's time). I need to use at least one component input which necessiates input assignment. The trouble is no matter what combination I try, input assignment does not have any effect.  All source devices I am...

Main System Denon 2313 L/R Martin Logan Motion 40 C Martin Logan EM C2 Surrounds Martin Logan FX 2 90% Movie/Game/TV 10% Music I am looking for 1 or 2 (I know 2 is better) subs to give me some excellent bass from this system Room is a living room, so i think the giant tubes are...

The Denon AVR-X3000 has two HDMI outputs, and one of these is labeled "ARC" (for Audio Return Channel). I would like to use one Denon HDMI output for my Bravia TV and the other one for my front projector TV. However, the Denon manual states, "Use an HDMI cable to connect a TV that is compatible...

I'm in no rush, but at some point I would like to upgrade my rears (WH 2 series Wharfedales), any insight on what I should get if I should even bother? Thanks (2) Rear WH 2 series Wharfedales (1) Energy CC10 center (2) Monitor Audio RX6 (towers) (1) Rythmik LV12R Subwoofer Denon 2313CI AV...

Looking to upgrade my Denon 2313 (just got it a few months ago) for another receiver with more power. I had the Marantz SR7001, which had plenty of power, but it went belly up. My 2313 just does not seem to handle my system well. I have to turn the volume to high 40's before I hear good sound...

Trying to connect my apple tv to my denon 2313ci receiver via hdmi cable. but I get a no signal message. I have tried all hdmi ouputs on the receiver and tried different hdmi cables. But still no signal message. I have spoke to denon on Thursday. They told me since I have tried all hdmi ouputs...

 Hi guys,   I'm looking to buy a Cambridge Azur 351R ($700) and a couple towers to start a new system. Looking at Cambridge S70 ($260 pr) or Focal Chorus 717V ($750 pr).   Are the Focals worth the near $500 extra?    Is the Cambridge Azur 351R (70 w/p/c) really better than the...