AVS Forum banner
denon avr 2805 a v home theater receiver
1-19 of 19 Results
  1. Receivers, Amps, and Processors
    I have searched the forum and maybe I can not put the right key words in. I would like to remote control in a multi-amp HT my old Denon. I can't tell from the documentation if I can just feed a 12v trigger into the remote In jack on the back to turn on the AVR. Before doing something not...
  2. Receivers, Amps, and Processors
    The following is a completely subjective A/B comparison focusing strictly on perceived audio quality of 2 channel music reproduction via digital inputs. Many of the units compared are not equals of technology or price, but only a result of what I had access to and my own curiosity. THE...
  3. Receivers, Amps, and Processors
    I'm trying to configure a friends Denon 2805 for Zone 2 speakers. He cannot find his remote so I brought my remote for my Denon 4311 but it does not control any of the functions on his 2805. A few questions. Is there a way for me to enter the "Setup" without the remote? Should my XX11 remote...
  4. Receivers, Amps, and Processors
     I might be able to get one with no video capabilities. I'd probably just use it as a headphone amp for now, and maybe a speaker amp later. I just want to know what to expect. Anyone had any experience with it? Any opinions on how good its amp and headphone amp are? Thanks!
  5. Receivers, Amps, and Processors
     I have thoroughly enjoyed my Denon 2805 over the years, but I would like to get another Denon with AirPlay and HDMI.  Which one of the current Denon models is comparable in sound quality to my 2805?     Any help will be appreciated!
  6. Receivers, Amps, and Processors
    I am a simple man, with simple needs. What I'm hoping is that you can help me decide whether I need video processing capability in my next receiver. I'm currently running my basic 3.1 system with a Denon AVR-2805. It's a great receiver, but after eight years it's time to upgrade to something...
  7. Receivers, Amps, and Processors
     Hey all, I've been looking around craigslist for another 7.1 AV receiver for the spare room in my house.  I'm not by any means looking for anything fancy so my budget was around $100. Here's what I came up with just this morning.   Yamaha HTR-5960   $100 At the top of my budget, but also...
  8. Receivers, Amps, and Processors
     Hi guys, I just picked up a Pioneer 1020k tonight for $50. I was running a Denon AVR-2805 with a Fisher CA-890 150 wpc powering my mains. Just got it home, set it up and used the automatic OSD setup. WHAT A DIFFERENCE! I was on the fence about getting a Pioneer Elite for $200 one of the SC...
  9. Subwoofers, Bass, and Transducers
     Hi guys, so I'm fairly new to the home theater thing and this forum has become my go to for ANYTHING AND EVERYTHING. I'm running a Denon AVR2805 w/ a Fisher CA890 powering my mains. My setup is a pair of Mirage Omni 260 towers with a matching CC-1 Center Channel, Infinity Reference 2000.6 side...
  10. Receivers, Amps, and Processors
     Hi guys so I have a Denon AVR 2805 & a Fisher CA890 Solid State Stereo amplifier. I'm using Mirage Omni 260's as my mains and my Fisher puts out about 200 watts per channel vs the Denon's 100 WPC. I figure driving all 7 channels has to lower my power output and to me it does sound less...
  11. Receivers, Amps, and Processors
     Hi guys, I'm about to pull the trigger tomorrow on a pair of Mirage Omnipolar 260 towers and the matching center channel to replace my Infinity Reference 2000.6 towers and Video 1 center channel (The 2000.6 towers will be moved to the side for side surrounds, the RS4's to the rear for rear...
  12. Receivers, Amps, and Processors
     So I have a Denon AVR2805 in a 7.1 configuration. I'm running Infinity Reference 2000.6 for my mains, 2000.3's for surrounds, RS4's for my rear surrounds and a Video 1 for my center channel. I've got my left rear surround set to +1DB and my right rear surround set to +2DB and the rest of my...
  13. Speakers
     I'm enjoying my newly finished 7.1 setup and am in the process of choosing a new subwoofer, however I also need to get a new center channel. As you can see in my info I have an Infinity Reference based setup, the correct center channel is a CC3 but the only one on e-Bay will be $165 with...
  14. Receivers, Amps, and Processors
     My Denon has been making a high pitched noise from time to time, it doesn't seem to happen much while using Dolby Pro Logic II EX, but when I'm watching a show on Netflix that has only a 2 channel audio signal it seems to happen often then. I'm using an XBOX 360 with a TOSlink connection. I've...
  15. Receivers, Amps, and Processors
     So I found two Cerwin Vega A-2200 solid state amps. From what I can gather they each put out 200 watts @ ohms. I planned on buying them for $100 for the pair and using them with my Denon AVR 2805 through the pre-outs for the right and left front channels so my Infinity Reference 2000.6's can...
  16. Receivers, Amps, and Processors
     Hi guys, I finally finished my 7.1 budget build setup. It is as follows Denon AVR 2805 - $100 Infinity 2000.6 Reference Towers - Mains Infinity 2000.3 Reference Bookshelfs - Surrounds - Both Towers and Bookshelfs - $100 Fluance 938B Towers - Rear surrounds - $100 Polk Audio PSW110 -...
  17. Receivers, Amps, and Processors
     So I just upgraded to a lightly used Denon AVR 2805. I ran the auto setup with the mic, put it at ear level where I sit and it wants to put all my speakers at +12 DB. I don't understand it, the Yamaha HTR 5730 I just upgraded from didn't have auto setup but I'd do it with a DBL meter and never...
  18. Receivers, Amps, and Processors
    Hi all I am new to the forum and I have been researching for a while on upgrading my current AVR. I'd like to upgrade to the Denon AVR X2000 but I don't want to take a step backwards in quality. I primarily use my AVR for movies and TV. I have a 7.1 set up. I'm looking to hook it up to a...
  19. Blu-ray Players
    I'm completely baffled, and stuck. I have had no problems with my PS3 for as long as I've had it (one of the first models) until now. I don't do firmware updates all that often--usually when something forces me to update. Such was the case recently when trying to use Amazon Instant Video. I was...
1-19 of 19 Results
Top