AVS Forum banner
denon avr 4308ci receiver
1-20 of 45 Results
  1. Receivers, Amps, and Processors
    The goal is joining the 6700 and 4308 is to create 19 driven speakers in 5 Zones. Ultimately being able to play same source in all zones and allowing Alexa usage. I have the option of swapping out the 4308 with a 3312ci, I also have a 2.0 Z-Amp 6700 6700 will be located in the livingroom with...
  2. Receivers, Amps, and Processors
    I have a Denon AVR4308ci and it has worked very well but it is 2014. I use this as a preamp while utilizing a couple of amp channels for the surround sound. Not sure what would be an upgrade. Not sure if waiting for 4K to be a lttle more in the mainstream makes sense. Have always like...
  3. Speakers
    I have just recently been fortunate enough to come across a deal I could not pass up on a pair of LSi9. Basically a dream come true, as I have been a major Polk enthusiast for some time. I am well aware that these are 4ohm speakers, and that my reciever (Denon 4308ci) is not rated for low...
  4. Receivers, Amps, and Processors
    I have just recently been fortunate enough to come across a deal I could not pass up on a pair of LSi9. Basically a dream come true, as I have been a major Polk enthusiast for some time. I am curious to hear from people who have driven any Polk LSi speakers in a 2 channel setup with my...
  5. Subwoofers, Bass, and Transducers
     Hey, So I have been running an ed a7s-450 with the upgraded amp for a few years now. I love the sub but I am looking to save a little room (this is a 2+ foot black cube) and make things look a little nicer. I'd guess I play 70% music and 30% ht duty with my system that is in the middle of an...
  6. Speakers
    I posted a longer version in General Home Theater with no response. I need to make a decision on the speaker placement by Friday so hoping I can stimulate some feedback. Gratuitous compliments, anyone?!? We are building a new house, see drawing. The 1st floor will be the only HT until the...
  7. Receivers, Amps, and Processors
    Here is my current setup: Denon 4308ci Denon DVD3910 (used only for CD's, SACD, High Resolution DVD Audio (192/24) PS3: Blu Ray and games Xbox 360: games Boston Acoustics VR-M80's (L/R) Boston Acoustics E70: Center Boston Acoustics VR-M/EX Surrounds (7.1) Velodyne SPL-1200R Mitsubishi...
  8. Receivers, Amps, and Processors
    Well I picked up a full b&w fpm surround sound setup (5.0) and am building my own sub (Marty sub box with inuke 3000dsp) so next on the list is a receiver to finish the setup off! I am not looking to spend much, as my speakers/sub already tapped me out pretty well. My only requirements are...
  9. Receivers, Amps, and Processors
    hey guys! Ive been thinking for the past couple of weeks to upgrade to a new AVR. The Denon 4308 is setup in a 5.2 system. Heres a pic Anyways the denon has been rock solid. Is it the right time to upgrade? I was thinking of yamaha 2020 not a bad price..Is the yamaha on the same level...
  10. Speakers
    Hey everybody, First time posting, but I've always turned to these forums for advice on home theatre information. I'm finally able to afford some nice speakers, and wanted some insight. I was debating between these two options: A) save some money and go with the Pioneer SP-PK52FS, and...
  11. Receivers, Amps, and Processors
    I was just wondering... Is it closer to the X4000 than the 4520? Thanks Jakob
  12. Receivers, Amps, and Processors
    Hello, Can anyone help me find a HDMI output board for my 4308ci. No output to tv. Can I change board myself?
  13. Receivers, Amps, and Processors
    NuForce AVP-18 and MCH-300SEC7 personal review Introduction Moving from integrated to separates can be a big deal. My first experience of this was back in 1999 switching from a Yamaha surround receiver to a processor by Lexicon (DC-1) and a multichannel power amplifier by Musical Fidelity...
  14. Audio Gear
    My AVR-4308CI got zapped by lightning. Not a direct hit on the A/C side, but probably an induced voltage on the HDMI line that killed the HDMI outputs. The amp starts, the menus show up fine on the front panel, and the audio outputs are still working (I can listen to non-HDMI sources). But both...
  15. Receivers, Amps, and Processors
    Hello all, I have been a long time Denon supporter, and have had Denons for about the last 20 or so years. (since the AVP-8000 days) I am in the market to upgrade from an existing AVR-4308CI in a dedicated 5370 cu ft theater with a M&K / Miller & Kreisel 4ohm S-150 7.1 configuration. Used...
  16. 2-Channel Audio
    Will I lose anything of I listen to 2 channel rock music with denon avr 789 driving giant 4 way 6 ohm speakers with 2 8 inch woofers rated 90 db sens in a 16x19 ft room? WILL denon 4308 be any better?
  17. Receivers, Amps, and Processors
    Which one is better? I am confused. Have opportunities to take either one, will use it for music and movies half to half time. Thanks.
  18. Receivers, Amps, and Processors
    Hi Members I need your help and advice on what to set my crossover settings for my speakers wit my denon 4308CI. Here is the breakdown: AMP - Denon 4308CI Front speakers - JBL E80 Center - JBL N-Center Surround back - Bose book shelf speakers ( I had these for a long time so I use them...
  19. Receivers, Amps, and Processors
    We have a Denon 4308CI hooked up to our Blu-Ray player, Tivo, and Apple TV for use with our TV, a Pioneer Kuro Elite. It's recently come to our attention that our neighbors in the building can hear the sound when it's playing, and having lived with noisy neighbors nearby before, we want to do...
  20. Receivers, Amps, and Processors
    Hi! I am looking for a 7.1 receiver and I was looking at these 2 receivers. I have no need for a 9.1 speaker setup. I listen to a lot of 2 channel music (Pure Direct Mode). I enjoy listening to SACDs music for 2 channel. I do from time to time watch movies and at reference sound level like...
1-20 of 45 Results
Top