AVS Forum banner
denon avr 4311ci 9 2 channel network multi room home theater receiver with hdmi 1 4a
1-20 of 109 Results
Advanced
  1. Speakers
     See above for room dimensions/layout.   I plan on stacking the back 8" for elevated seating. I am building a house, and am only wiring for 5.1, as I believe 7.1 would be overkill in that room. I am running 2 lines to the fronts though in case I want to do bi-amping.   This room will be...
  2. Speakers
     My current system (pictures) Fronts: 2xPolk RTI A9 Center: Polk CSI A6 Surrounds: 4xPolk RTI A5 Subs: 3x Rythmik Audio FV15HP Receiver: Denon 4311ci Amps: Emotiva XPA2 + XPA 5 Room: 12x20x8 I have been fairly happy with my polk system but I was thinking about upgrading my speakers...
  3. Speakers
    I have just recently been fortunate enough to come across a deal I could not pass up on a pair of LSi9. Basically a dream come true, as I have been a major Polk enthusiast for some time. I am well aware that these are 4ohm speakers, and that my reciever (Denon 4308ci) is not rated for low...
  4. Receivers, Amps, and Processors
    I have just recently been fortunate enough to come across a deal I could not pass up on a pair of LSi9. Basically a dream come true, as I have been a major Polk enthusiast for some time. I am curious to hear from people who have driven any Polk LSi speakers in a 2 channel setup with my...
  5. DIY Speakers and Subs
    Dayton Audio T1504K 15" Titanic Mk 4 1000 Watt Subwoofer Kit I am having a strange issue with the above kit. The subwoofer emits a very low hum when I plug it into my wall outlet. Since I have an outlet every 8ft. I tried multiple outlets with the same result. I then tried different power...
  6. DIY Speakers and Subs
    So, I ordered 3 Inuke 1000dsp to power each of my SOES Tempest in Mono Mode. The sales person was going to sell me a 1/4" to RCA cable however a different sales contacted me questioning what I was using the amps for. (this was from Sweetwater) He said the outputs are NOT 1/4 TS but they are...
  7. Receivers, Amps, and Processors
    Just got an denon x4000 the other day to upgrade my 1909. So far the 1909 sounded way better. I've ran multeq xt32 several times and everytime it is crushing my midrange to nothing. From about 90 to 200 hz it's putting a huge dip in it and is making it sound super bright and thin. There's no...
  8. Receivers, Amps, and Processors
    I'm trying to configure a friends Denon 2805 for Zone 2 speakers. He cannot find his remote so I brought my remote for my Denon 4311 but it does not control any of the functions on his 2805. A few questions. Is there a way for me to enter the "Setup" without the remote? Should my XX11 remote...
  9. Video Processors
    This is probably a typical scenario... I currently have a Denon 4311ci AVR that is setup as my main HDMI switch including 3D passthrough. That handles various HDMI inputs, and output is hooked up to a 2D only plasma TV on monitor 1 HDMI, plus a Sony HW30 2D/3D projector on monitor 2 HDMI. We...
  10. Subwoofers, Bass, and Transducers
    Hi, I have a denon 4311-CI which has dual subwoofer outputs with the ability to calibrate them independently (I believe). My question is this: if my subs are co located , and stacked, is there any reason to use the two sub outs as opposed to just using a splitter off of one of them?
  11. Receivers, Amps, and Processors
    Hi guys, Here is my system that I have as of right now. A/V Receiver - Denon AVR 4311ci L/R - Ascend Sierra-1 NrT Center - Ascend Sierra-1 NrT Surrounds - Ascend HTM-200 Sub - Rythmik F12 Note .... apologies if I offend anyone with my title of the post. Just wanted to have a grabber...
  12. Receivers, Amps, and Processors
    Sadly, my Integra pre/pro is a little outdated and can't support 3D. I do have a 3D projector (W1070), and want to play around with it for the kids. I am looking for an affordable/budget AVR to serve as pre/pro, so it has to have the following criteria: * Preouts, obviously * 3D pass...
  13. Subwoofers, Bass, and Transducers
    Like title states, How to effectively wire in 4 subs plus 2 buttkicker amps into receiver? My equipment: Denon 4311ci- preamp Emotiva xpa-5 Emptiva xpa-2 2 - svs pc13-ultra, one with bash amp and one with sledge amp Total 6 buttkickers and 2 bka1000-n amp. 3 bk go to 1 bka1000-n, i...
  14. Receivers, Amps, and Processors
    Like title states, How to effectively wire in 4 subs plus 2 buttkicker amps into receiver? My equipment: Denon 4311ci- preamp Emotiva xpa-5 Emptiva xpa-2 2 - svs pc13-ultra, one with bash amp and one with sledge amp Total 6 buttkickers and 2 bka1000-n amp. 3 bk go to 1 bka1000-n, i...
  15. Receivers, Amps, and Processors
    I bought a harman kardon avr 1710 today. It was open box with no remote but I got it for about $340 less than retail. It wasn't really the receiver I'd had in mind(had my eye on a yamaha 673) but I couldn't pass this up considering I was still using a 10 year old Onkyo without HDMI and this...
  16. Speakers
    Dear Paradigm owners - Need your expertise and advice please:::: I am really interested in Paradigm speakers. I have never used them before but read good reviews. Can you please suggest me the best speakers for my set up below? I need a 7.1 set up. My Receiver = DENON 4311 Subwoofer =...
  17. Speakers
    Dear Experts - Need your expertise and advice please:::: Can you please suggest me the best speakers for my set up below? I need a 7.1 set up. My Receiver = DENON 4311 Subwoofer = Sunfire SDS-12 Room side = 24 ft long / 15 ft wide Primary Use = 95% MOVIES ; 5% Music Budget = $3000
  18. Receivers, Amps, and Processors
    Situation: Dedicated theater room, epson 5030 projector (3d etc) 9 in wall speakers. Intended usage: Almost purely movies and video games. Minimal music in this room. Budget: Ideally sub 1000, can swing whatever it takes to get a great setup if I am not going to have to replace it in near...
1-20 of 109 Results
Top