AVS Forum banner

denon avr e200

  1. Receivers, Amps, and Processors
    The trend seems to be that most new receivers have none or only a single S-Video port. I have many classic game consoles that only support S-Video as their highest form of output. For my den I picked up an Yamaha RX-V3900 two years back that works great with tons of S-Video ports that it passes...
  2. Receivers, Amps, and Processors
    I recently had to have my 3312ci looked at for repair. The repair facility decided it wasn't worth fixing or too costly, so they referred it back to Denon for a suitable replacement. I was just recently contact by Denon and told that I will be receiving a refurbished AVRX4000 for my...
  3. Great Found Deals
    I don't know how widespread this is, but last night I noticed the local Sam's Club featured a "one time buy" of Denon E200 receivers for $178.86. Quantities are limited, but anyone interested in this lower end Denon might want to check their local Sam's Club to see if they carry them.
  4. Receivers, Amps, and Processors
     Sorry to ask nube question, but looking for any direction towards a receiver/amp that only drives a 5.1 speaker set up from a digital audio source (AppleTV/ optical TOSLINK).  I really don't need anything else from that room (no recorded/streaming audio).  Trying to stay away from a soundbar...
  5. Receivers, Amps, and Processors
     I received a set of Klipsch HD 300 speakers for Xmas. I really know nothing about receivers/speakers/audio. I'm looking to get the Denon AVR E200.   Can someone help me out as to if that would work? I really don't fully understand the wattage listings on either side.   Thanks for the help!
  6. Receivers, Amps, and Processors
    i just bought denon e 200 receiver and i was wondering what i should set the frequency crossover in the receiver for the sony sm 500 subwoofer i have. my front 3 speakers are bose cubes . the crossover on the subwoofer goes from 50hz to 200 hz. thanks
  7. Receivers, Amps, and Processors
    Hi all - Just got the Denon as a gift. How's it compared to my Yamaha? , I feel like the Yamaha is under powereing my speakers - Polk 70s and 40s & Cs10 & BIC f12s X2. One of these recievers will go upstairs for a basic 3.1 set up but want to keep the best for my home theatre. Thanks.
  8. Receivers, Amps, and Processors
    Hello I am new to this forum, and not in any way a sound guru, I have a 5.1 system, with an onkyo r391 receiver from the htib onkyo 3500. I since then replaced most of the speakers, the front left and right are the polk t15s, (center is still onkyo bur will replace with polk cs10 in next few...
  9. Receivers, Amps, and Processors
    My current Craigslist receiver (purchased three years ago) a very old VSX-454, is having connectivity issues. It is time to step into the modern age and into an entry level 5.1 HDMI capable receiver. I would like to spend no more than $225 for a basic unit. I am currently driving two older 100w...
  10. Receivers, Amps, and Processors
    Hi there, My in-laws bought a defective Onkyo HT-S3300 HT in a box where the HDMI out will not work. Rather than buy a new Onkyo receiver to offset the defective receiver, they are planing to buy the Denon AVR-E200. The onkyo speakers are great and that is the reason why we are just planning...
  11. Receivers, Amps, and Processors
     Hi All,   I've got 2 (Left and Right) Polk Monitor60 Series II Floor Standing speakers and 1 Polk Audio CS2 Series II Center Channel Speaker.  I plan to buy 2 in ceiling speakers for my surround sound and a sub as well.  Most likely a Polk 10 or 12 inch.  I was wondering if anyone could help...
  12. Receivers, Amps, and Processors
    Hello all. I have an old 9 year old Kenwood 6.1 receiver that I want to replace. Was purchased at radioshack as part of a HTIB. I replaced the speakers with energy classic speakers and now want to replace the receiver. i want a decent receiver for around $200 - 250. I will be connecting my...
  13. Receivers, Amps, and Processors
    Hello, I'm in the market for a new home theater receiver. I don't need anything fancy (wifi and bluetooth for example), just basics. I have an appleTV for all of the "smart" functionality I need. Here are my preferences:
  14. Receivers, Amps, and Processors
    I want to upgrade from my current receiver. I saw comments that some units run hot & thought I’d better check to see what kind of clearance is needed. The Onkyo TX-NR525 manual says if installed in a bookcase or rack to leave 8" of free space at the top and sides. The Denon AVR-E200 manual...
  15. Speakers
    Hi all, I've been an appreciator of good audio for years and have very much enjoyed a casual pursuit of what sounds nice to my own imperfect ears. But recently I've been delving into the more technical side of audio simply because it's intriguing and there are a couple things that I wish were...
  16. Latest Industry News
     It’s that time of year where AVR manufacturers release their new line-up of AV receivers. Denon has released a new entry level series called the E-Series which boasts a lot of features at an affordable price. In the line-up we begin with the AVR-E400 ($599), a 7.1 system that can also be...
  17. Receivers, Amps, and Processors
    Denon AVRs Targets Demand For Uncomplicated Setup, Use Denon’s entry-level E series tops out with the $599-suggested 7.1-channel AVR-E400. Mahwah, N.J. — Denon has begun shipping an entry-level series of A/V receivers (AVRs) targeted to entry-level purchasers said to be turned off by...
Top