AVS Forum banner
denon avr x4000 7 2 channel home theater receiver
1-20 of 318 Results
Advanced
  1. Speakers
     Hello,   I have a denon x4000 receiver which I have connected via HDIMI. When I test the speakers with audessy setup all speakers fire however when I configure with windows and test windows fires the front right and left speakers instead of the rear and back left and right. I have a 7.1...
  2. Receivers, Amps, and Processors
    My set-up is PSB spekares and dual PSA XS30'S.... I have no interest in extra zones as i use a niles keypad system- im interested in tuning up my speakers n subs... is the 150 wpc that much better then the 125 wpc.... anything else i should know?? thanks-
  3. Receivers, Amps, and Processors
    In the market for a new av receiver. Budget $600-$900. I would like to have a phono input and fully powered Zone 2 audio and HD video as part of the feature set. Is this possible in this price range? Thanks in advance for any suggestions.
  4. Speakers
     Hi guys, I'm a new to this highly valuable forum and was reading a lot of useful information in the past 2-3 months. I'm plotting to start building a decent home theater system with high emphasis on musical aspect rather than a HT. My main fields of musical interests are ranging from classic...
  5. Receivers, Amps, and Processors
    I am new to the game and recently purchased a SR5008 and was wondering if it would be enough to power a 7.1 set of Silver 6 Monitor Audio speakers. I heard the RX8 with a NAD and I thought the sound was good, but I have heard Monitor Audio's can be difficult to drive and can be picky with...
  6. Speakers
     See above for room dimensions/layout.   I plan on stacking the back 8" for elevated seating. I am building a house, and am only wiring for 5.1, as I believe 7.1 would be overkill in that room. I am running 2 lines to the fronts though in case I want to do bi-amping.   This room will be...
  7. Receivers, Amps, and Processors
     I've been trawling the boards for the last hour or so and just read the owners manual but I can't seem to find the answer to what I'm sure is a simple question: I have 2 zones I'm using, the main with 5.1speakers and a new LED tv and I have an outdoor tv set up with a pair of outdoor speakers...
  8. Speakers
     trying to put together my speakers for my surround sound , but having trouble deciding what to do here, because there are so many good speakers out there. my room is 13 x 20 and open on one end for another 10 ft, i currantly own an integra 4.0, , switching to denon x4000,pb 12 nsd svs, center...
  9. Receivers, Amps, and Processors
    Help! After a recent firmware update the Denon X4000 is not working properly at my mother-in-laws house 1500 miles away. Her components include a recent vintage Panasonic Plasma TV, Time Warner HD Cable Box, Denon AVR-X4000, and MX-850 Remote with MRF-260. All connected with HDMI cables. Before...
  10. Receivers, Amps, and Processors
    I am looking at a package and would like some input. The complete package includes: 2 x RF-7II Towers 1 x RC-64II Center 2 x RS-62II Surrounds 2 x BIC Acoustech PL-200 1 x Each Denon AVR-X4000 or SC72 Will the x4000 or SC72 be enough for this setup? Thanks in advance!
  11. Receivers, Amps, and Processors
    Hello, I'm new to the forum and I'm looking for purchasing advise for a new AVR unit. My budget is $1000 -$1500. This is my situation: I currently have 2 plasma TVs side by side (65" & 40") in my television room. I'm looking for an AVR that I can connect both TVs to that will allow me to...
  12. Receivers, Amps, and Processors
    would I see a major improvement on this upgrade. I'm running PSB image t45 and b15 speakers along with Dual subs( PSA XS30's)..... nothing wrong with the Pio except MCACC can be frustrating at times-. thanks-
  13. Audio Theory, Setup, and Chat
     Ok, new here, and I promise that I tried to dig around as best I could before asking but could not find exact enough info...    My wife saw me sorting through the fistfulls of cabling behind the AVR recently and asked why there was so much, and I explained that an HDMI capable tuner would...
  14. Receivers, Amps, and Processors
     I have a 7.1 home theater, and 5 speakers with a TV on the porch. I have all the speaker wires ran to a closet in the house. I need a receiver that will allow me to play the living room tv source outside or play music instead of listening to tv when it is on football or something. I also want...
  15. Receivers, Amps, and Processors
    I have switched from a Denon 5803 analog setup to a Denon X 4000 HDMI setup. Playing a Blu-ray that is both automatically picked up in the Blu-Ray settings as well as manually checked for Dolby HD 7.1 the receiver is showing and playing Dolby Digital 5.1. I tested in the X 4000 setup that the...
  16. Receivers, Amps, and Processors
    So my B&K Reference 70 finally died and so did the company. B&K reminds me of another company who stated they were in it for the long term, upgradeable boards, trade in programs, and yes, Made in the USA. well, I bought into it and regret it. I don't care if it is made in the US or not, I just...
  17. Receivers, Amps, and Processors
    Hey everyone, im new here and have a question. I currently have an Onkyo tx-nr808 and I am wanting to spend some money. I can get a good deal on a Pioneer Elite sc-75 and sell my Onkyo or I can buy a new Emotiva XPA-5 or XPA-3 to use with my Onkyo. Im no pro at this stuff but I have been...
  18. Speakers
     I posted about a week ago about building a system for my living room/family room/den (whatever it's called now).   Here's what I'd like to do with what I've researched and learned (but still have more to learn obviously).   Denon X4000 AVR Philharmonic 3 Fronts Niles ICS 7 rears...
1-20 of 318 Results
Top