AVS Forum banner
diysoundgroup
1-14 of 14 Results
  1. Audio Gear
    Unassembled Includes everything: speaker kits, narrow flat packs, crossover boards and components, brackets, waveguides, etc. One flat pack has been removed from its box (box included if desired), another flat pack and one speaker kit have been opened but not unpacked, and everything else...
  2. Speakers
    i am thinking of using JBL PRX 415M as my main speakers ( L C R) and this comes under my budget of 459 euros each. the current Monitor audio speakers i am using do not have the mid bass thump. Anyone used this PA speakers for home theater ? are they any good for chest thump Anyother options...
  3. DIY Speakers and Subs
    I have been doing a ton of reading on this forum over the past year, and I finally started building my home theater/game room a couple months ago. I have the first layer of drywall up. Saving cash for the green glue and second layer. In the mean time, I am trying to decide what speakers to use...
  4. DIY Speakers and Subs
    My center channel has always been the weakest link of my front stage. It’s a hand-me-down TM that, while not bad sounding, is inadequate compared to my MTMWWW mains. However, after adding a pair of sealed HS24-MKII’s, my mains are also lacking the output to keep up. I figured I would go with...
  5. General Home Theater & Media/Game Rooms
    JDontee's Home Theater 1.1 Well, I'm close enough to done. With the upcoming KC Home Theater Crawl, I'd thought I'd post some pics of my room and equipment so people can get an idea of what to expect. My room is a little different than most. I had a lot of unfinished basement, so my dad had...
  6. DIY Speakers and Subs
    I have read a lot here while contemplating my single sub build. I am looking at a DIYSG flat pack for 15" or 18", ported or sealed (4 cu ft either way), for a quick build. The basement room is 12.5"w x 19"l (7.5"h) ... BUT the back is half-open via a dividing staircase to the back part of...
  7. DIY Speakers and Subs
    Hey there! I'm relatively inexperienced in this realm, but with good resources. Trying to build a nice system which could be used 50/50 for music and movies. What I have: AV Reciever, Cerwin Vega E312's, Diy 18" Martysub (currently broken). Wood/Metalshop. What I want: DAC/Preamp + Diy...
  8. DIY Speakers and Subs
    So I just helped @Stharlingny84 with this build. His front stage is using 3 JBL 3677s, so he needed something that could keep up as his SVS PB13 Ultras weren't cutting it. We're still waiting for the amp from speakerpower to come in to finish it up. Each box is wired to present a 2 ohm...
  9. DIY Speakers and Subs
    Hey everyone, over the weekend I finished putting together a pair of Volt 6's and the Fusion 8 center. I just wanted to post some pictures for you guys to see them. I am very happy with how they turned out, I did a cherry veneer to match the Fusion 8 towers that I built last year. I didn't get...
  10. DIY Speakers and Subs
    Cinema-8's arrived yesterday. Packaged well and the cuts are nice, so it should make for a clean cabinet build. The crossover.....well, that'll be tricky. I haven't looked at schematics since Physics in college, so this should be fun. I can't find any build threads for the Cinema-8's, only...
  11. DIY Speakers and Subs
    After reading through every post I can find for the past week, I am hoping to finally buy what I need to make this system work. Any advice or criticism would be greatly appreciated :) Room size: 13'X14' with 9 foot ceilings; Seating distance: 5 feet. I am not sure if the speakers in question...
  12. DIY Speakers and Subs
    Hi everyone, I apologize if this question has been asked before -- I wasn't able to find any useful search results. Does it matter where the crossover is placed within the speaker cabinet? I'm building a set of Fusion 12 Tempest speakers, and the easiest place to fit the crossover is on the...
  13. DIY Speakers and Subs
    Looking to add on to my existing set up. This is the forum where overkill is the norm right? Currently using 2 um15's in sealed 4 cubic ft boxes. Am thinking the next upgrade will be: 2 more um15's in sealed 4 cubic foot boxex. Cost about $700 total for both drivers and cabinets. or 1...
1-14 of 14 Results
Top