AVS Forum banner
emotiva upa 700 seven channel power amplifier
1-19 of 19 Results
  1. Audio Gear
    I'm in the market for a reasonably priced amplifier to power four speakers across two different zones in my house. The Emotiva UPA line seems to be the most cost-effective, but open to other suggestions!
  2. Receivers, Amps, and Processors
    Pretty big rookie here so I've got a few questions. I currently own an Onkyo TX-NR818. Onkyo claims it is capable of 135 W (8 ohms, 20 Hz-20 kHz, 0.08%, 2 channels driven, FTC). More specs seen at: http://www.onkyo.ca/Products/model.php?m=TX-NR818&class=Receiver Frankly, I am confused as to...
  3. Receivers, Amps, and Processors
     Sorry in advance for the long post....I have recently moved into a new home which will have a dedicated media room which is 15x12.  So far the setup will include a new Sharp LC-60EQ10U, Pionner Andrew Jones line of speakers with the FS52 for mains, SVS SB-1000 Subwoofer, Apple TV, PS3, and...
  4. Dedicated Theater Design & Construction
    All, I live in the greater Boston area and am starting my do diligence for the home theater I plan on building. Please let me know if you think I am doing something for lack of a better word, stupid, or if you can share your thoughts or advise. Also, am I missing anything? Would you do...
  5. Receivers, Amps, and Processors
    Just an odd question I thought of while trying to decide which speakers to buy for front heights for a 9.2 setup. Can I hook a 4 ohm speaker up to an amp that has 8 ohm speakers hooked to it also? I have an Emotiva UPA 700 that I am going to use to drive 4 speakers, 1 pair is 8 ohm and I was...
  6. Receivers, Amps, and Processors
    First let me say sorry for making another one of these "which should I buy" threads... A little background: I've been using the same over 10 year old Sony receiver and am finally looking to upgrade since I recently purchased a 65" Panasonic VT60. So, I've only been getting regular DTS or...
  7. Receivers, Amps, and Processors
    I am in the market for a new AVR. My Integra DTS 30.3 has the HDMI board problem. I am looking at the Onkyo NR818 and the current Emotiva bundle on sale. My speakers are Energy Veritas 6.2 towers, Energy 5.2 Center and Energy RC 10 surrounds. I have a Velodyne Sub and it was working great until...
  8. Receivers, Amps, and Processors
    I'm thinking about upgrading my ancient HDMI-less Denon receiver to one of these four options. I already have Boston Acoustics VS260 speakers with their center channel and an Outlaw EX sub. I'm not planning on upgrading the speakers anytime soon and will probably add another sub later on but...
  9. Audio Theory, Setup, and Chat
     I currently have Onkyo TX-NR809 for multi-purpose in my theater room now. It's uses for both movie and music, but mostly music. It's configured for 5.2 system (two floor standings, center, two wides, surrounds and two 12" subs). For music, it is in stereo with 2.2 speakers (two floor standing...
  10. DIY Speakers and Subs
     Hello guys,   I just started to look into the DIY Speaker Threads but I work often with wood and also builded some realy nice music instruments.   Now I have this flood of drivers and the old chassis from the Logitech Z5500 and Z2300, but I heard that the Tang Band speakers are good...
  11. Receivers, Amps, and Processors
    just got the emotiva upa-700 amp, came in today. only had enough time before work to set up the front channels, just to hear it. I need help how to set up everything properly. i hooked up the 12v trigger from the receiver in "IR section, OUT" to the amp, 12v trigger "IN" is that right? amp...
  12. Receivers, Amps, and Processors
    I just snagged one of these for myself. PT7020C4 7.1 with both rca and balanced outputs. I made an offer and it was instantly accepted. I don't think I can post a link in here and be within the rules, but go check on ebay and you will see them. I did check the guy's feedback and it seems legit...
  13. Receivers, Amps, and Processors
    I just ordered the Emotiva UMC-200. I'm trying to decide between a Outlaw Audio 7125 or 7200. I'm not sure if 200 watts over 125 watts per channel is going to make a difference in sound quality. I have no doubt that they'll both produce reference levels in my listening room. I'm about 10 feet...
  14. Receivers, Amps, and Processors
    Anyone know of any audio processors that just do audio, and still offer multi channel support? I've been looking at lots of DACS but most the "hifi" stuff seems to be 2 channel only. Any time you get into the realm of surround sound there's always video inboard And a host of bloated features I...
  15. Receivers, Amps, and Processors
    Was wondering if anyone has any information on the actually wpc when all 7 channels are driven. The specs say 125wpc but i really don't know. Now i'm in the process of buying an emotiva upa-700 which is 80wpc and a class A/B amplifier. With a proven bench test, just to see if this will make a...
  16. Receivers, Amps, and Processors
    Hello, I currently have the following setup. The room is about 15X20 and carpeted: * Pioneer SC-1522 * Martin Logan Motion 40 speakers for Front L/R * Martin Logan Motion 30 speaker for Center Channel * Infinity in wall speakers for Rear Surrounds and Front Surrounds * [2] BIC PL-200...
  17. Receivers, Amps, and Processors
    Question, Would connecting a Emotiva UPA-500 or 700 amp to my Yamaha RX-A820 receiver running a 5.1 speaker system have any improvement on sound quality or improve the level at what I can play music or movies? Or for that matter any 5 channel amp rated at 65 watts a channel or more with all...
  18. What's Your System Configuration
    Updated 4/15/11. Will continue updating as room treatments (audio/visual) go up; among other future improvements. Screen Wall Finished-5/17
1-19 of 19 Results
Top