AVS Forum banner

failure

  1. Qumi Q2 Firmware update failed - HDMI input distorted, USB not working

    Digital Projectors - Under $3,000 USD MSRP
    I tried updating Qumi Q2 firmware via MicroSD and it failed installing midway. Now the USB function with interface with sound/image/video/documents doesn't show up and the HDMI input is heavily distorted. Is there any way to restore the previous firmware or finish installing the new? Thank you!
  2. VCR/DVD combo IR sensor fail

    DVD Players (Standard Def)
    I just finished fixing a non-receptive IR sensor on a JVC HR XVC25U combo VCR/DVD player. Remote control was ok but wouldn't control the VCR/DVD. I could control the Samsung HDTV with it and checked that the remote was sending signal on the VCR/DVD settings by using the digital camera...
  3. PT-AX100U HDMI input just quit

    Digital Projectors - Under $3,000 USD MSRP
    This projector has worked for years. I see I posted with a problem here in 2009 so it has worked for at least that long with the same setup. Today the projector did not recognize the hdmi input. Nothing changed in my setup but just to check I tried different things. I tried a different...
  4. Official OPPO UDP-203 Owner's Thread

    Blu-ray Players
    UPDATED 02/08/2019 - Official 65-0131 Firmware Released UPDATED 12/28/2018 - Beta 64-1221B Firmware Released UPDATED 06/29/2018 - Official 60-0625 Firmware Released UPDATED 06/5/2018 - Beta 60-0601B Firmware Released UPDATED 03/2/2018 - Official 56-0224 Firmware Released UPDATED 01/26/2018 -...
  5. Postponement of the end of an Era? EH55

    DVD Recorders (Standard Def)
    This is more than a bit embarrassing, but I've never cleaned my EH55 that I was fortunate to have found "open box" in Vancouver, B.C., perhaps or. years ago. In any event, using Tai Yuden DVR-R media, the deck has recorded (from my cable box line outputs) sucessfully for all this time. In the...
  6. Help!!! Vertical lines display on starting led project LG HS200G

    Digital Projectors - Under $3,000 USD MSRP
    Hi, Getting black and white vertical lines from projector 3-5 mins after turning on the projector. It works fine after a cycle of leaving it with lines (5-10mins), turn off(2-3 mins)) and turn on again. The lines go off after following cycle everyday. I have to leave projector on with lines...
  7. JVC DLA RS35U issue

    Digital Hi-End Projectors - $3,000+ USD MSRP
    Wondering if anyone here who may own this PJ have had this issue. While using the PJ last week for no apparent reason (no electrical storms or browouts, etc) vertical green lines appeared across the width of the image area. There are 58 of them in total and they appear to be evenly spaced. I've...
  8. JVC RS35U Issue

    Digital Hi-End Projectors - $3,000+ USD MSRP
    Wondering if anyone else who owns this PJ has experienced this issue. Was using the PJ and apparently without cause, no weather/lighting or brownout, I suddenly had an overlay of 58 vertical green lines equally spaced across the image area. I have tried restarting the PJ, changing input sources...
  9. TX-NR636 Wireless/Network Failures (works for a few days then fails)

    Receivers, Amps, and Processors
    Hello Folks, New to the forum - and just spent a ton of time reading up to try and find this issue. The only person that seems to be having a slightly similar problem has it a bit worse off than myself (at least my wireless works for a few days). Not quite sure what's happening but I've been...
Top