Search Results for ‘firmware’

So my son decided to update our LG G1 through the onscreen prompt, we were currently using 03.20.45. After updating the picture quality on SDR has become unbearable to watch. This is across a few sources, including built in Netflix, YouTube and U.K.Sky Q HD channels. There is a lot of artifacts...

problem solved, thanks you

This tutorial is intended for advanced users only, some technical knowledge and understanding is required. If you don't know how to use Linux shells, this thread is not for you. Beginner questions, e.g. how to establish a SSH connection or how to handle shells, please ask in other, more...

Hi, I had my Optoma HD8600's motherboard replace from another unit, but the firmware is old (1.07). I contacted Optoma and they said that since it was a discontinued projector, that firmware is no longer available. I'm hoping someone has more foresight that Optoma and actually has a copy...

If anyone has an older AVP with older firmware that needs to be updated. I have just successful updated mine from: Original: AVP ID: 05090116 Checksum: 97F2 DSP ID: 0374:6 After Update: AVP ID: 06210211 Checksum: 97F2 DSP ID: 0374:6 There were four steps involved each with it's own challenge...

Hi All, Wondering if anyone has a copy of the B&K Tool Suite, and I’m also looking for the latest firmware I can find for a CT600.3 distribution amp. Any help would be greatly appreciated!

I'm not sure what's the deal, I have tried everything to install the firmware update. I even made sure to follow the directions and confirmed that the USB mode is connected in mass storage mode. I saw someone here who had the issue back in 2015 which is what made me ask again to see if anyone...

Somebody that can point me in the direction og upgrading DLT firmware on Epson projectors. I have the firmware but i dont have the software to do it.

"OFFICIAL" 2019 LG C9 Consolidated Info, FAQ, Troubleshooting, Firmware & more General Info & Summary - UNDER CONSTRUCTION! This is not a replacement or clone for the 2019 C9–E9 Owner's Thread (No Price Talk)! That thread (and others) is the main source of this consolidation thread. Other...

HI! I hope this is in the right place. I have a Denon Pro DN-F300. This is a one U rack mount media player. I need the firmware files for this unit as it's stuck at the firmware update. I found the service bulletin regarding this issue but after repeated calls to Denon and repeated...

Hi everyone, just picked up a used T765HD for the bedroom and had a some questions. Tried to do a search but not much out there, particularly with the T765 models. Posted a note on the 775/785 thread but not much activity there. Is the difference between the HD and HD2 software or hardware...

This AVS Forum thread is for discussion of the LG UBK90/80 4K UHD Blu-Ray Players No Price talk please... Both the UBK90 and UBK80 adhere to UHD Blu-ray specification and will support 4K resolution, HDR10, and object-based audio formats such as Dolby Atmos and DTS:X. In addition to Dolby...

Long story short, I tried to do a firmware update on my JVC RS400 projector, and for some reason the update failed early in the process, leaving my projector bricked, with no lights or power. I thought for sure the projector was completely dead and would either have to be shipped to JVC for a...

Official Pioneer VSX-532/832 A/V Receivers Owners Thread I figure I'll start a thread for Pioneer models VSX-532 and VSX-832, I see not a lot of people are talking about them, for those who actually do own one of these three receivers can finally share their views about them here. Here are the...

Hello everybody, I'd like to find out if it is possible to know the current firmware version which is running on a Optoma EH300 projector. I have installed two of these devices in a room. After having updated the firmware on both to make them react to the orders sent out from a software...

This thread is for owners of the Optoma UHD60/65 Projector or are serious about buying and have questions. If you do not own it or are serious about buying it there is another thread to post in on this projector. Please post: Real World experience Settings and experimentation...

Cinephiles and AV enthusiasts have anxiously awaited the dawn of Dolby Vision on Ultra HD Blu-ray. The format is already used in theaters and by Netflix, Amazon, and Vudu. But, home theater enthusiasts seeking the highest quality are often primarily interested in physical media and the quality...

Extron - Anyone have firmware uploader software ? Or an Extron account ? Hi, I have an EXTRON DSC 301 HD, it works very well but I would like to upgrade it with the new firmware. In the Extron website, I can download the firmware but not the software for upload it, need to have a reseller...

Hello Experts, I have my Pioneer Elite SC-85 in a 5.1.2 setup with all the ELAC Debut Series speakers and Sub-woofer, currently the receiver is on firmware 1-295-008-518-126, but I'm trying to understand if that's the best for my setup or if I should go with something else, looking at the...

Hello Folks, I have the older Magnavox H2160MW9A DVD recorder. The one that will only finalize a disc if you change to source L3. There has been a firmware upgrade available for some time but, I'm a bit worried about trying to install it. What happens if something goes wrong? Will my old...