AVS Forum banner

issue

  1. Power Amp Clicking - Marantz MM7055

    Receivers, Amps, and Processors
    Good morning all. Hoping someone could help me. I found a bunch of articles, but nothing definitive here. My Marantz 5 channel power amp MM7055 is making a clicking noise every so often. Right now I have my front 3 speakers and 2 surrounds hooked up to the amp. Its a 5 channel amp. The...
  2. HDMI audio extractor only displays at 720p

    Audio Theory, Setup, and Chat
    Hi All, I have strange issue with an HDMI audio extractor which is causing my cable box to only output 720p. My setup is a j-tech JTD4KATSW connected to a Verizon DVR (Arris VMS1100) and a Samsung UN46FH6030. When the audio extractor is set to 5.1 (for SPDIF output) the DVR only outputs at...
  3. Car Audio keeps cutting out for a split second on random intervals but no longer then

    Car Audio, Video, and Nav
    Hey guys could someone help me out finding the issue and maybe fixing it. :D So the issue is that my car audio keeps cutting for a split second randomly every few seconds(sometimes a bit longer) which gets rly anoying after a little bit. I've checked all the wires and they are fine atleast the...
  4. Audio plays through tv speakers with receiver

    Receivers, Amps, and Processors
    I'm sure there is a simple solution to this, but I haven't been able to find anything. I currently have a Denon S530BT and a Sony X690E TV. Sometimes, when I start my receiver and TV and input device (PS4 for example) the audio from the PS4 will play through the TV Speakers. I have no idea why...
  5. old Epson eh-tw3500 image issue please help!

    Digital Projectors - Under $3,000 USD MSRP
    I bought this 10 ear old projector off gumtree. its only done 400hrs over ten years on the original bulb. it has been sitting for the last 5 years. powers on okay but image is blurry especially in center and purple/green hue in centre of image around words (which i guess causes the blurr)...
  6. dac issue... 🤬

    Receivers, Amps, and Processors
    A few weeks ago I bought a dac. And I connected it with the coax cable. I used a rca splitter to 2 rca's to 1 3.5mm audio jack, so -(rca) =(2rca) -(3.5mm). But when i connect it to my amp using just simple rca's. I get a problem, the problem = that i hear i giant hum and hiss sound. also the...
  7. Low Volume On One Speaker

    Receivers, Amps, and Processors
    I have a JVC R-X40 super-a receiver with 2 floor standing speakers plugged into it. Recently, I noticed that the left speaker all of the sudden got quieter than the right. I swapped the speakers to see if it was the speaker or not, it wasn't. So I plugged them into the room b attachments, it...
  8. Vizio Soundbar Not Playing Sound Right After Turning On

    Soundbars
    I have a Vizio soundbar (don't remember what length). When I turn it on, no sound comes out until I press the input button on the remote. I would like the sound to play as soon as the speaker finishes its startup sequence, not after I press the input button. The input I use most often is...
  9. "OFFICIAL" 2018 Denon "S-Series" / "X-Series" AVR Owner's Thread + FAQ (Posts 1-8)

    Receivers, Amps, and Processors
    Several new firmware updates from Denon and Marantz that were released last week bring various new features to select models. From IMAX Enhanced support on the Denon AVR-X8500H and Marantz AV8805 AVRs, to adding a web UI for those models, and the addition of eARC support on a variety of...
  10. Replace my Dying Onkyo TX-SR308 or attempt a fix?

    Receivers, Amps, and Processors
    Hi all, I've referred to this forum many times but never needed to post before. Looking for some help with what I should do next. Should I replace my ageing (and slightly broken) AV Receiver with a new one or attempt a repair? Background I have an Onkyo AV Receiver TX-SR308 connected to my PC...
  11. *Official* Marantz 2017 NR1508/1608, SR5012/6012/7012 owner's thread

    Receivers, Amps, and Processors
    This page is under construction... Welcome to the Marantz 2017 receivers thread! Well it's that time of the year again when Marantz starts to unveil their line up for 2017. Starting in May and continuing into the fall, new receivers for their slim line series as well as the full height...
  12. Newbie diagnosing audio issues with new old school amp

    Receivers, Amps, and Processors
    Current Speakers: Panasonic SB-500 (4ohm, 40w Max) Other Speakers mentioned (Not currently in use): Philips AK-141 2 way Amplifier: Denon UPA-F10 4-16ohm, 40w per channel (as far as I can tell) Usage: Movies, Music (Rock/Metal) Hi There :), Audio noob here. I recently decided to buy an old...
  13. Help Needed - KRK RP5 Issue - Monitor Keeps Cutting Out

    Speakers
    Hello everyone, For the last couple of days I've been having issues with one of my KRK RP5 monitors and I was hoping that any of you could either give me some advice, or perhaps tell me what's causing it. I've been using these monitors for about 7 to 8 years now, but recently my left monitor...
  14. Harman Kardon AVR 1565 With JBL SCS145.5 Woofer Issue

    Receivers, Amps, and Processors
    Hi all Well, to be honest I'm not an audio expert so I required help from you guys. I have at home a Harman Kardon AVR 1565 with JBL SCS145.5 speakers. The system was working like a charm but a few days back I noticed that there was no sound from the woofer but the rest of the speakers works...
  15. Sony HW40ES "staticy line" flickers

    Digital Projectors - Under $3,000 USD MSRP
    I have about 1200 hours on my lamp and have experienced no issues with the projector till now. It is kind of hard to explain so I will try my best. The image has random flickers of extremely thin lines throughout the projection. If it was happening on a computer screen I would compare their...
  16. Epson 5030ub help please

    Digital Hi-End Projectors - $3,000+ USD MSRP
    Hello, I have an Epson 5030UB, it is going on for about a year now. Over the past month I have experienced the Projector shutting down after about 5 hours of viewing. I had a company come in and clean it(no issues). I get no flashing light indicating that it is overheating, and once it shuts...
  17. The "OFFICIAL" 2016 Denon "S-Series" / "X-Series" AVR Owner's Thread + FAQ

    Receivers, Amps, and Processors
    The "OFFICIAL" 2016 Denon "S-Series" / "X-Series" AVR Owner's Thread + FAQ 2016 Denon AVR models ---> S510BT/S720W/S920W/X1300W/X2300W/X3300W/X4300H/X6300H The D+M Group USA (Denon/Marantz) has released information on the new 2016 Denon models. The X6300H will be the highest model released...
  18. Speaker Clipping/Popping Issue w/ Dolby Digital

    Speakers
    First off, I'm new to this forum so I apologize if this has been addressed elsewhere but I have searched everywhere and can't find anything specific to my issue. My receiver is an Integra DTR 6.8. I route everything through this via HDMI including my ps4, Xbox One, Apple TV, and Directv. I have...
  19. Flickering line while watching Netflix on brand new JS9000

    LCD Flat Panel Displays
    As the title says, I keep noticing an annoying flickering line while watching Netflix. I'm not even sure it would be considered flickering, but that's the best word I could think of to describe it. This is a 3 week old Samsung JS9000 (55"). I only notice this while watching Netflix, it's...
  20. Samsung UN55J6300 issues

    LCD Flat Panel Displays
    I just bought this tv from BJ's not much longer than a month ago and I'm already finding some issues. These aren't huge issues by any means and I'm finding on the internet that they aren't new issues. Every once in a while, and not with any regularity, the tv will switch inputs. It always...
Top