AVS Forum banner
lfe
1-20 of 22 Results
  1. Subwoofers, Bass, and Transducers
    Like I said above, the sub makes this sound whenever watching movies at decently high volume. With music and other higher bass it sounds fine, but when there's a explosion or some kind of LFE in a movie, it makes this crackle sound. As you can see in the video, it barely has any excursion. Video
  2. Audio Gear
    Still building my theater and have already upgraded the UM18's to Lavoce 21 inchers. They are in mint condition and have less than 30 hours on them. Will drive 3 hours or so to meet you half way if you buy all 4. I'm in southern Indiana about 4 1/2 hours to Chicago 2 1/2 hours to Nashville 3...
  3. DIY Speakers and Subs
    I have LG Soundbar with wireless sub. I am trying to add Line output, so i could connect a wired sub. I took some pictures of the boards and chips. If someone could point me in right direction on where to connect to get low level output. My second option is to add High to low converter but that...
  4. Receivers, Amps, and Processors
    Hi people! Let me explain my problem. My configuration is: Denon AVR-X2300W, 5 speakers (L R large, C RL RR small), no subwoofer. Sources: NVIDIA Shield TV and Computer thru HDMI. Bass management works fine for almost every multichannel format I tested. I mean, I run speaker mapping test files...
  5. Subwoofers, Bass, and Transducers
    Hi everyone! I just bought a second hand REL R-528SE. I noticed that the LFE input gives me very low output compared to the High Level input (speakon). Where the high level volume control is dialed in at the 10 o'clock position the LFE volume is dialed in at the 2 o'clock position to get a...
  6. Subwoofers, Bass, and Transducers
    So I'm looking into the ELAC S10EQ because I can get a killer discount on it. It sounds really good and I definitely want it for the sound. My only issue is, I'm not using this for home theater, but more for my little bedroom studio set up with powered monitors and an audio interface. That...
  7. 2-Channel Audio
    Aloha, new here and an electronic novice with a question. A powered 8" Sony subwoofer (SA-WG99) I found at a thrift store has ONLY one LFE input. My old school studio amp has no LFE output, just cinch (RCA) and right and left speaker output. Is there a way to connect the sub?
  8. Subwoofers, Bass, and Transducers
    Setting up the Denon D-M41DAB (the combo of the D-M41 with SC-M41 speakers) with the Pioneer SW-8MK2 subwoofer. The receiver has Sub/LFE Out sub has RCA in. What cable do I use to connect them and how should it set the volume, Freq mz, Phase, and Power (auto?) on the sub? Did a few searches and...
  9. Audio Theory, Setup, and Chat
    We all know the coveted HT rule: Set your speakers as small/limited range with a 80-100Hz crossover, even if you have tower speakers, spare your amp and speakers the extra work, and let your sub take care of the lows. Here's my thing...what do you tell the person who's a "purist" and only runs...
  10. Subwoofers, Bass, and Transducers
    How crappy can I get with the LFE cables before it becomes noticeable. Because it's "Low Frequency" am I correct my assumption that it's an analog signal and could experience some issues or is it digital where there will be little degradation. Bottom line I'm connecting a Energy ESW V-10 to my...
  11. Subwoofers, Bass, and Transducers
    Okay guys I have a question because after reading what feels a book about installing and properly setting Sub-woofers. But I just watched LA LA Land and Whiplash I realized (after touching my sub) it's not working. Like I don't see or feel any movement from it's speaker. I even disconnected LFE...
  12. Receivers, Amps, and Processors
    I have a Polk SWA 500 sub amplifier connected to two Polk CSW 100 subs. Initially, I connected the PRE OUT FRONT SUBWOOFER on the Yamaha Aventage A3050 to the LFE IN (Unfiltered) input on the SWA 500. I turned the LFE setting to max (120) and volume to mid on the SWA 500 (as per instructions in...
  13. Subwoofers, Bass, and Transducers
    Hello everyone, I need assistance with connecting a Klipsch RSW-10 (not 10D) to a Yamaha RX-V1 AVR. I realize these are older models. Fortunately, both are in excellent condition. The Yamaha RX-V1’s documentation is fairly clear. It will send low frequency of 90 Hz and below to the...
  14. Subwoofers, Bass, and Transducers
    I am looking for some help as I am new to home theater setups. I have installed a 5.2.2 system in my home and I am working on getting everything tuned in. In regards to the subwoofers should I just use the LFE and let the receiver (Pioneer SC-91) do all the work? Do I mess with the gain at all...
  15. Audio Gear
    This listing is for a Paradigm UltraCube 10 subwoofer in black ash finish for bass in a stereo music 2 channel system or the LFE in home theater. MSRP $1,150 ea. SOLD please close thread. I am also parting out an amazing Paradigm/Rotel/MIT home theater system in other listings. The sub can be...
  16. Audio Gear
    This listing is for a Paradigm SUB 12 subwoofer in black ash finish for LFE or music in home theater or 2 channels systems. MSRP $2,499 ea. Asking $1400 obo. I am also parting out an amazing Paradigm/Rotel/MIT home theater system in other listings. The sub can be connected by RCA or XLR and...
  17. Receivers, Amps, and Processors
    Hi! Since 2007 I have been the owner of a Denon 4306 eveything was working fine until I noticed the absence of my HSU sub on the mix. I have not changed anything but just in case reviewed all connections and settings. They were fine. A level test was run and no sound came from the subwoofer, all...
  18. Receivers, Amps, and Processors
    The "OFFICIAL" 2015 Denon "S-series" / "X-series" AVR Owner's thread + FAQ (HDCP 2.2) 2015 Denon AVR models ---> S510BT/S710W/S910W/X1200W/X2200W/X3200W/X4200W/X6200W D&M USA should be making an official announcement mid June regarding the new 2015 USA Denon lower level AVR models...
  19. Subwoofers, Bass, and Transducers
    I have a Yamaha RX-V677 7.2 Channel Wi-Fi Network AV Receiver and a Definitive Pro Sub 200TL. Problem is i don't know how to connect the Yamaha to the Definitive Sub. Please help with any advise. I have attached pics of the back of both to this thread. would like the Power on Receiver to...
  20. Audio Theory, Setup, and Chat
    I was wondering, is the LFE channel artificially created? and i Noticed that Most DVD's and Blu-Rays, the "new" 5.1 remaster is different from the original, whether it be Dolby Stereo or plain Mono. Examples: The Rescuers (1977) DVD and Blu-Ray both have bogus 5.1 surround, while the 'Ray has...
1-20 of 22 Results
Top