AVS Forum banner
lg 47 inch hdtv rs 232c
1-5 of 5 Results
  1. Digital Hi-End Projectors - $3,000+ USD MSRP
    Are there any other important cables needed to projector other than HDMI ? I have a SC65 Reciever , but should i still add another HDMI? Do i need PC cable if i wanted to play movies from PC ? What is (RS232) ? Wiring will be difficul so i dont want to forget anything !! Thanks!
  2. Remote Control Area
    Hello, I am using Global Cache hardware (GC-100-12) and Irule Builder to control a McIntosh Home Cinema Processor (MX121). The problem I have is that repetitive serial commands like for volume up or down stop working after a while. It seems that 'something' gets clogged up with no response as...
  3. Home Automation
    I am looking to control my Epson 8350 projector with an automation controller. When I installed my cables, I only ran 2 HDMI cables to the projector for 'future proofing'. Now, I realize I need an RS-232C / serial cable to control my projector. Rather than trying to run a completely new...
  4. Receivers, Amps, and Processors
    I just want to confirm that the cabling between a computer and a 2112 is the same as indicated in the Denon 1912 serial commands document , i.e. a straight slave (DCE) connection, and not a DTE connection requiring a null modem converter between my Mac and the Denon. It seems like every vendor...
  5. Home Theater Computers
    Does anyone mind sharing their RS232 command codes here? I have tried all i could think of to control it and i just can not seem to get it connected... I am using Visual Basic 6: Code: MSComm.CommPort = 6 MSComm.RThreshold = 1 MSComm.Settings = "19200,N,8,1" MSComm.InputLen = 0...
1-5 of 5 Results
Top