AVS Forum banner
marantz nr1402 av receiver
1-20 of 21 Results
  1. Receivers, Amps, and Processors
     Hey guys, although I've been researching pretty thoroughly I'm still fairly new and wanted advice on a couple of issues I had.   My equipment:   PS3 LED TV Marantz NR1402 receiver KEF T105 5.1 speakers A generic Toshiba Laptop   Currently, the PS3 is connected to the TV via HDMI, and...
  2. Receivers, Amps, and Processors
    I've got a few different HDMI inputs connected to my 1402 (Cable, PS4, Apple TV), and I'd like to send audio to a Beoplay A9. Right now I have it connected to the pre out connectors, but I'm not getting any audio. Can this setup be made to work?
  3. Speakers
     I'm currently running a pair of Paradigm Atom bookshelves off of a Marantz NR1402 AVR.  The setup works, but it is obviously anemic on the low end.  When I bought them I thought I'd eventually end up with a sub to fix that.  I was wrong.  I don't have a great place to stick one, and given the...
  4. Receivers, Amps, and Processors
    I've been hearing a static sound coming from the rear left channel on my 5.1 Energy Mircros. I had previously thought a faulty lose connection to be the culprit but upon investigation I've come to figure out that that's not the case. Ive re-stripped my wire but to no avail. I then followed to...
  5. Receivers, Amps, and Processors
    I must be missing the setting.... I want my AVR to output the menus/video through the simple video-out connection. The old TV doesn't have HDMI. It has both component and the "yellow" video jack - but both yield it no signal to the TV. I've searched the manual - no luck. I've spent at...
  6. Receivers, Amps, and Processors
    While it might sound ridiculous to compare a High end equipment with a commercial offering, I still went ahead to do it, because I had both at my disposal. I've been having the Sony receiver for the past 6-7 years, but recently I became aware that all my other AV devices have been replaced by...
  7. Remote Control Area
    Hi folks, I just bought a Marantz NR1402 AVR and am trying to program the Comcast remote (platinum color, 3 function) to control the volume of the AVR. The 5-digit setup code given by the Comcast remote instructions is 30189. Obviously this does not work. I've searched the web and plugged...
  8. Receivers, Amps, and Processors
    Hi, I was wondering the sound quality difference between a Marantz PM5003 vs a NR1402? it'd be for 2/2.1 channel music. i was thinking the 1402 to get audessey room correction, not sure how much that would be a positive. I'm listening in a 13' x 12' carpeted living room which opens into a 8' x...
  9. General Home Theater & Media/Game Rooms
    Here's the deal. So I work in Magnolia and just end up giving into my impulses which results in me purchasing speakers, receivers and all the like. I just moved into my apartment, and am at a loss. Here's what I have, a Marantz 1402 ($200 what a steal), a Pioneer VSX-519, B&W M1, Yamaha...
  10. Soundbars
    So this has been discussed a little but I have been unable to find a good answer to my question. So here it is: I am trying to set up my home theater and all I have from an audio perspective at this point are the speaker from my tv, which got old after about two days. Since my layout isn't...
  11. Audio Theory, Setup, and Chat
    I currently have the Marantz NR1402 receiver driving Definitive ProCinema 600 speakers and a B&W HTM61 center channel speaker. This Marantz receiver only supplies 50W per channel, but movies sound great with this setup. However, music doesn't sound as full through my Definitive satellites, so...
  12. Receivers, Amps, and Processors
    I'm looking to buy a receiver. I have it narrowed down to the Marantz NR1402 and the Yamaha RXV471. They're both the same price. It will probably be driving a pair of Paradigm Atoms at low volumes. My main concern is reliability and quality of FM tuner. Which receiver would you choose? Thanks.
  13. Receivers, Amps, and Processors
    So... I'm currently rebuilding my humble HT/listening room and I'm trying to decide what to use as an amp/preamp. This is somewhat of an odd setup as I'm building some large open baffle speakers (similar to the Jamo r909's) and I want this system to be good for music and theater (you can see my...
  14. Receivers, Amps, and Processors
    i am thinking about getting a new avr. I am going to use 3d so i need passthrough only need 5.1 and don't think i need anything more than 5.1 Want quality power is 50 watts of marantz the real deal? Will be running infinity sm towers and infnity sm center, infinity quadrapole surrounds...
  15. Receivers, Amps, and Processors
    one thing that is bothering me about the receiver is that when your switching between channels the volume goes from soft(quiet) to where its normally at(louder). is there any way to make it always stay the same? also i think thats the reason when i play sleeping melodies from my iPhone(they are...
  16. Receivers, Amps, and Processors
    I got this reciever and it 3D capable 5.1. It also has output for a 7.1 surround if you use an external amp...Does this external amp need to be able to process 3D material also? Thanks
  17. Receivers, Amps, and Processors
    I just got a new Marantz NR1402 and it is working wonderfully playing blu-rays from my PS3. However, since my television (Panasonic TH-42PZ85U) does not support ARC, I used an optical cable to connect from my tv's digital audio out to the nr1402 optical but I am not getting any sound. I read...
  18. Receivers, Amps, and Processors
    I just purchased the Marantz NR 1402 av receiver and I have a question about the audio playback from my PS3. I know the PS3 outputs Dolby True HD and DTS-HD Master audio plus many more formats, yet with the receiver set on auto, the audio reads Multi-Channel in and PCM. How can I get it to...
  19. Receivers, Amps, and Processors
    I recently purchased the Marantz NR1402, which looks to be a good solution for my basic 3.1 setup, provided I am able to set it up the audio correctly. I use a Pioneer 5080 Plasma, a black macbook for DVD playback and netflix, and now the Marantz1402. No cable/satellite or blu-ray. The lack...
  20. Speakers
    Sorry for the noob question, but this will be my first setup. I just purchased the Marantz NR1402 and two RF-52II's. For now, these will be the only two speakers the 1402 will be feeding. Wondering the best way to set this up and what wiring/banana plugs I should go with. Thanks.
1-20 of 21 Results
Top