AVS Forum banner
marty
1-17 of 20 Results
  1. DIY Speakers and Subs
    First post. Have been lurking around the site a few hours a day for about 6 months. The amount of information and insight on AVS forum is awesome. I am renovating a walkout basement and have an open concept tv area open to the main part of the basement so around 7500+ ft3. There is also a WAF...
  2. Speakers
    Hello! I'll be as direct as possible but thank you for checking out this post. The objective here is to have the F12s run to 120hz and the Cube to 80hz. Perfectly open to other suggestions but that seems like a good place to start. I’m 50/50 music/movies but if I had to choose I’d favor tunes...
  3. DIY Speakers and Subs
    Firstly, I want to thank you for opening my discussion and I appreciate any help in advance. This may seem like a long post, but I want to provide as much detail as possible as it seems people needing help are always asked for more info, so I will provide as much as possible. Being brand new...
  4. DIY Speakers and Subs
    Hello all, I've researched for a long while but not very tech savvy with Winsd. Long story short I plan on doing dual Modified marty cubes with UM18-22s. Issue is I can go as tall as 28", wide as 30", but I my depth front to back cannot exceed 20". Use is 99% movie / TV and want to maximize the...
  5. Audio Gear
    SOLD. Located in Des Moines, IA. I have a RE Audio XX 18 in a mini marty for sale (note it's an XX, not XXX). It's roughly 11 cu ft interior dimensions after losses tuned to 18 hz. Box is MDF covered in duratex and is lined with insulation inside. Subwoofer is dual 4 ohm which I currently...
  6. DIY Speakers and Subs
    Is anyone in the Raleigh, NC area wanting to split a shipment from GSG? I'm looking to get 2 Full Marty enclosures. We can mix and match cabinets, so we don’t need to necessarily get the same cabinets, and we’ll both get the four pack pricing for each type of cabinet we want. We can split the...
  7. DIY Speakers and Subs
    I didn't see an on-going "help me with my sub design" thread, but feel free to merge this as necessary. This design was inspired by the MiniMarty, but I wanted the port to be on the bottom of the box. Here's the current design: Dayton Ultimax UM18-22 Two ports Each port is 7-5/8" x 3" x...
  8. DIY Speakers and Subs
    Hello everyone! Upgrade time of year again! Last year I upgraded my projector, screen, receiver and subs. Right now I am hitting the refresh button on DIY sound to get some 1299's to upgrade my LCR. I have a chunk of money left in the budget and it got me thinking... I have been powering a...
  9. Audio Gear
    I'm moving into a small condo and can't afford to piss off my neighbors with subs the size of medium refrigerators :/. Therefore, I have for sale (2) Full Marty Subwoofer enclosures including SI 18" D2 Subwoofers. I purchased them only a year ago from fellow AVS Forum member DWALEKE, and these...
  10. Audio Gear
    $400 or best offer - DIYSG MicroMarty w/ Dayton RSS390HO-4 and 500w Bash Amp tuned to 23hz if I recall correctly (Local Pickup Only) I am located in NW Ohio (45840) Sub/Box/Amp function splendidly, but I'd only give the box a 7/10 in looks department. Getting ready to build 2 DS4-18 cyclops...
  11. DIY Speakers and Subs
    Hi Everyone, Thanks for the amazing work here - I figured this may require it's own thread, outside of the MartySub / Microcube FAQ. I am looking at building a uniquely weird L-Shaped Microcube enclosure both inside and beneath some new cabinets I will be installing over the next few weeks...
  12. DIY Speakers and Subs
    Hi folks, I've got 2 Mach5 UXL-18 here that I'm planning to put into ported boxes behind an AT screen. Since I don't know my way around WinISD all that well, I started off with a full marty and modified the dimensions so that it's 18" deep with the same exterior volume, kept the same port...
  13. DIY Speakers and Subs
    Hi, I am about to start cutting the wood to build 2 minimartys but I found 2 different blueprints and I need to know witch one is right before cutting. They have the same external dimension but different port size. 1 set show a port height of 3 inches and the other one show a port height of 2.5...
  14. DIY Speakers and Subs
    A while back I posted a thread about questions for the 2ND Full Marty that I wanted to build, well I finally got somewhat of a go ahead and here is the woofer! Something that I would like to add is that, for all of the Canadians on this forum, Creative Sound Solutions is a great place to buy...
  15. DIY Speakers and Subs
    It is time for another full Marty Build! This will be my first subwoofer build but not my first speaker build so whatever you see that i am doing wrong in the build process please do stop me. I just got the driver in today, I hooked it up to a power amplifier that i had, no crossover, so i...
  16. DIY Speakers and Subs
    Please see the two posts below for a little background on how I got here. Hopefully this will help people with similar questions in the future. http://www.avsforum.com/forum/155-diy-speakers-subs/1824274-home-theater-first-build-fusion-8-6s.html...
  17. DIY Speakers and Subs
    I have the typical problem of trying to make a marty sub match my living room. I've gone from building a completely new entertainment center and now I'm back to building standalone subs. I think the full rebuild will wait until I have a basement. At this point I think matching my current tv...
1-17 of 20 Results
Top