AVS Forum banner


  1. New Mitsubishi 3,385" Diagonal Flat Screen

    OLED Technology and Flat Panels General
     These things are AWESOME!!!!  Hard to describe how bright and sharp these things are.  I am sure Mitsubishi would love to build somebody one.  Serial number 000003 is waiting to be built.          
  2. Really need help with Mitsubishi DLP!!

    Rear Projection Units
    I cannot determine if this is in fact a Lamp issue or a color wheel issue. Here is a link to a video that shows my issue and the sound the TV is emitting. HELP! I don't wanna buy the wrong part and perform the wrong repair. THANK YOU IN ADVANCE...
  3. Official Mitsubishi HC5 Owners Thread

    Digital Hi-End Projectors - $3,000+ USD MSRP
    I am getting my new projector in a few weeks and there wasn't an owners' thread for it so I decided to create one. I believe this projector currently represents outstanding value for the money selling for around 2200$ street price. Currently there are no reviews of the HC5. Rumor is (it's...
  4. Can you explain Mitsubishi color wheel claim?

    Digital Hi-End Projectors - $3,000+ USD MSRP
    http://www.projectorcentral.com/pdf/projector_spec_7395.pdf So Mitsubishi claims this new projector can be used with an OPTIONAL new 3 segment color wheel that dramatically improves colors, and they show a picture of the better color wheel image and the ordinary, lousy color wheel image...
  5. The Blacker the Theater, The Better the Image

    Digital Hi-End Projectors - $3,000+ USD MSRP
    A lot of threads have become a home theater improvment color scene around "black"ing out the screen area. Flat black paint, black felt, black velvet, black carpet... You name it! I figured lets put it in this thread and share our thoughts / noticed improvments / methods / pictures of before and...
  6. Mitsubishi Lamp Hour display?

    Digital Hi-End Projectors - $3,000+ USD MSRP
    Trying to figure out how many lamp hours are on my Mitsubishi XD 2000U? I don't have a remote but was hoping it wasn't needed. Anyone familiar with this PJ?
  7. Mitsubishi HC5 vs. Sharp XV-Z30000 as a single PJ solution

    Digital Hi-End Projectors - $3,000+ USD MSRP
    I am struggling with the choice and want to hear your thoughts. They're roughly the same price. Mitsubishi HC5 input lag ~40 ms, no info on Z30000.
  8. Please!!!! Need help!! With a Mitsubishi wd-60738

    3D Displays
    I purchased the Mitsubishi 60738 and I have the firmware update and now I would like to enjoy 3d content. I do not have the money to spend for the 3d starter pack that Mitsubishi offers. What do I need to get started watching 3d without purchasing the starter pack or the ir emitter?
  9. Mitsubishi wd-73831 weird color issue.

    Rear Projection Units
    Ok, this has happened several times in the past few days where the color would go weird {grays and purples}. It does this regardless of input (even the built in menu gets weird colored {like purple instead of blue}). Seems like it is happening more when the TV has been on for a while...
  10. Spoiled by DLP, on the way out, what new TV to look for?

    Rear Projection Units
    Have a Samsung LED DLP HLT5687 for the past 4 years and a few months and after 11,000 hours of use, the red LED has went, at least that's what I think it is. Blue-Green hue, then the screen starts flickering every second in blue after the tv has been on for a few minutes. I was debating on...
  11. Need help with Mitsubishi WD-60735

    3D Displays
    Hey guys, I recently purchased a Mitsubishi WD-60735 tv and I have some questions regarding the setup and additional equipment needed for watching 3D bluray's. I currently have a Denon AVR-3312 receiver and Sony BDP-590 bluray player. First off, what is the best way to set this up? I have...
  12. Mitsubishi WD65C9 Light Bleeding at Left/Bottom Edges

    Rear Projection Units
    Hello, I read this forum quite a bit before I bought my Mitsubishi WD65C9 and it had help me greatly with my purchasing decision, so I would like to thank you all for all the detailed information posted here. =) It has been almost 2 years since I bought it, and it has treated me well...
  13. WS73837 as a monitor question

    Rear Projection Units
    I'm trying to hook up my Mitsu WS73837 to my laptop with little success. I see from other posts on the forum that it can be done but need some info. I have a 25' cable that has the 15 pin D-sub connector plugged into the laptop VGA output and it has component (RBG) leads plugged into the side...
  14. New screen suggestion

    I am going to buy a new screen and I have 3 products I am looking for. 1- Lissau Tab-Tension true color http://www.av-connection.dk/?PGr=2719&ML=709 2- VISIONHD TAB-TENSION http://www.visionhd.ca/index.php?main_page=product_info&cPath=37&products_id=177 3- Cinemax HD180E...
  15. Epson 8350 or Mitsubishi hc6800-gc?

    Digital Projectors - Under $3,000 USD MSRP
    I was dead set on getting the epson, until I saw the Mitsubishi 6800 refurbished for 850$! The projector is going in a dedicated theater room with total light control. I can place it anywhere. I would like to use a 1.1 gain 120-125" elite screen. My main concern is image quality. However I am...
  16. Mitsubishi DLP: WD-82742 or WD-82842

    Rear Projection Units
    All, My 9 year old Hitachi 65X500 finally broke down. I decided to replace it with either the WD-82742 or WD-82842. From what I can gather the 842 adds the following to the 742: . Center Channel Mode -- N/A for me(I have a sound system hooked up to the TV). . 16 Speakers built in -- --...
  17. Mitsubishi WD-65C9. Any good?

    Rear Projection Units
    I've been looking to upgrade my garbage tv (Insignia 42" 1080p LCD). I was looking at 50-55" Panasonic UT or ST plasmas, but saw an ad on Craigslist for a WD-65C9 which he said was used sparingly and is selling because he got a front projector. Bulb is supossedly good. He asked $575, accepted...
  18. Who can I trust to purchase online

    Rear Projection Units
    I'm about to purchase an Mitsubshi WD 73742 online, If I go through Amazon the TV will come from Paul's TV. I've been reading several reviews about shipping horror stories and poor customer service issues regarding Paul's. I also want to get a 5-year warrenty from Square Trade and I'm willing...
  19. From white spots to strange fingerprint smudges on my DLP

    Rear Projection Units
    I had the dreaded white spot problem (just a few spots though) on my Mitsubishi 73 inch DLP TV, so I called the repair place and they replaced the DMD chip. That immediately fixed the problem, and I was really happy until I watched a show tonight and it faded to black at the end, and I could...
  20. 2012 Mitsubishi 3D DLP Owners Thread (C12/642/742/842 series)

    Rear Projection Units
    Now that we are beginning to see these being sold and purchased, I felt that we should have our own space to discuss the next phase in Mitsubishi's DLP development. So share your pics, reviews, thoughts and advice. There are new things to discuss like Full HD 3D protocols, going from Clear...