AVS Forum banner

nad

  1. NAD VISO TWO Flash

    Receivers, Amps, and Processors
    Hi to all, I just replaced the MCU (T5cc1) chip from my old VISO 2 receiver. Since the firmware is inside there it needs to be programmed trough the serial interface in order to work. In the past these upgrades where offered free of charge by NAD online, but NAD refuses to give me this...
  2. FS: NAD Bluesound Node Black $300

    Audio Gear
    Sold.
  3. NAD D 7050 or C320BEE amplifier parts better?

    2-Channel Audio
    I currently have the NAD C 320BEE and I am trying to decide if I should replace it with the D 7050 for amplification (and digital inputs), or just add the NAD D 1050 DAC to it? Any ideas whether the amplifier section of the D 7050 is more powerful, about equal, or less able when driving speakers...
  4. NAD enhanced stereo and laptop question

    Receivers, Amps, and Processors
    Hi Everyone, A question for the far more experienced (than I am) audio members ... I have a sony Vaio Lap Top (running Windows 8.1) connected by HDMI to a NAD T757 Receiver . I can't select "enhanced stereo" in listening mode when the LAPTOP is the source. I also have a BluRay player, Bell...
  5. NAD 3020a Interference

    Receivers, Amps, and Processors
    I recently bought a NAD 3020a second hand. It works and generally sounds brilliant, but there is high pitched crackly interference when it is plugged into my computer. There is none when I use my iPod with it so it must be the computer. The funny thing is, when my computer is off, the...
  6. I need one more A/V Receiver. Which upgrade should I go for?

    Receivers, Amps, and Processors
    As of now I currently have two sound systems: a stereo system in my bedroom being powered by a Denon 1612 and a 5.1 system powered by a Denon 1912. Once my basement is done being remodeled I'm going to set up another 5.1 system down there, so I'll need another A/V receiver somewhere. The...
  7. NAD T748 + NAD 916+ NAD 912 tripping!!

    Receivers, Amps, and Processors
    deleted!!
  8. Front: NAD 30 vs Athena WS-100

    Speakers
    I have recently acquired a pair of fairly rare loudspeakers, NAD 30's. I believe they are Braun/ADS made for NAD circa mid 80's. Right now my current set up is Athena WS all around in a 5.1 configuration (sub is different brand). I use my set up for everything as I do not have the space for...
  9. NAD T748 + ROTEL 976 set-up

    Receivers, Amps, and Processors
    :confused: Hi Guys, I have a NAD T748 (7.1) & inherited Rotel RB-976 (6 channel). I am currently running a 5.1 set-up with Mordaunt Short 903-904-905 & HSU stf-1. MS LCRs are bi-amped using the Rotel alone and surrounds are getting powered through the NAD. (I had a ton of wire leftover so no I...
  10. Issue with Marrantz SA8004 Cd player?

    CD Players & Dedicated Music Transports
    All of a sudden my Marrantz SA8004 CD player stopped working. It now plays music (tested USB source & cd) at extremely low, almost inaudible volumes. I have the player hooked up via interconnects to my NAD receiver which goes out to another amp and then and out to Magnepan MMGs. It worked fine...
  11. NAD 326BEE Buzz/Hum multiple connections

    Receivers, Amps, and Processors
    Hey folks, have a strange issue with my NAD 326BEE I get a loud buzzing/humming from the amp whenever I have strictly 'more than one' connection plugged into the AMP. When there's only 1 signal connected, everything is fine. As soon as I add another connection, no matter what the source or...
  12. Distortion with NAD T748

    Receivers, Amps, and Processors
    Hi, Somebody please help me reduce distortion in my system while playing music (not too loud-dark side of the moon-320kbps) Here's my system: NAD T748 pre/pro Rotel RB-976 pumping in 70W/channel of true power 2 Mordaunt short 904 (90db-8ohms) 1 Mordaunt short 905 (89db-8ohms) 2 Mordaunt short...
  13. Bridging a NAD C375BEE with a C275BEE

    Receivers, Amps, and Processors
    Hi, I was wondering what exactly I could gain from bridging a NAD C375BEE with a C275BEE amp. According to the instructions it would give me 330W mono blocks but they would also see my speakers as 4 ohm speakers (wiring for this seems to use both left and right channels together on each amp)...
  14. NAD T-775 HD2+ upgrades

    Audio Gear
    NAD T-775 recently upgraded with VM120 and an AM200 audio modules, the equivalent and same specs as a T777 at $2999 except this has 20 more watts. HDMI switching at 3D 1080p with all the latest audio codecs. Audyssey with mic included. 180w x 7 - toroidal transformer makes it run dead silent...
  15. Need advice on "exceptional" receiver approx. $1,000 + or -

    Receivers, Amps, and Processors
    The reason I have $1,000 as a starting point is just from my experience of being a quiet observer of numerous Sound & Vision articles and various other sources, the truly great equipment typically isn't less than $1,000. Functional sure, but maybe not with the audio quality, enough juice to...
  16. any ideas where i can get the service manual for the nad m25?

    Receivers, Amps, and Processors
    i have been looking for the service manual to the m25 power amp online to download it, but i have not had any luck... anyone have any idea? thanks
  17. Multi Channel Amps - NAD, Rotel, and Marantz

    Receivers, Amps, and Processors
    I have three Proceed amplifiers - 2 x HPA 2, 1 x HPA 3. The HPA 3 only powers the center channel and the HPA 2 won't even turn on. The fact that Proceed isn't around anymore is making me think that I should get used to the idea of spending some money on a new amplifier - more specifically, a...
  18. Deleted

    Speakers
     ...
  19. another 'please help me' with AVR decision.......

    Receivers, Amps, and Processors
    after many days of research, online and this forum, i came up with these choices. they are only just thoughts at this point as i am majorly overwhelmed. NAD T 748 http://www.audioadvisor.com/prodinfo.asp?number=NAT748 or http://www.audioadvisor.com/prodinfo.asp?number=NAT748V2...
  20. NAD 775 VS ARCAM 400 RECEIVER: SHARE YOUR EXPERIENCES WITH ME PLEASE..

    Receivers, Amps, and Processors
    After selling my rotel rmb 1095 amplifier yesterday, i am left with the Marantz sr 7007 receiver driving my monitor audio set up. I would say the sound is very good and it bests my past onkyo 1009 unit and other denon units i have i have owned. That being said, i am considering purchasing a...
Top