AVS Forum banner

onkyo tx nr1007 135 watts 9 2 channel av surround home network receiver black

  1. Receivers, Amps, and Processors
    I have the Onkyo TX-NR1007 receiver and confused on what power I can expect when using 4-ohm speakers. The speaker impedance section in the manual says: Other specs from the manual (page 153) say: When I'm looking at speakers, what power can I expect this thing to deliver -- 270W...
  2. Speakers
    I'm moving to a new apartment where the living area is double the size of what we have now. For years, I've been using M&K 7 setup which I've been moderately happy with. Some info about the room and my gear:Space is about 12' x 21' with 8' high ceilings. (About 2100-2500 cubic feet) Viewing...
  3. Receivers, Amps, and Processors
    I recently upgraded all my speakers in my home theater. I had the Onkyo HT-SR 800 HTIB for years. The speakers I currently have are all Klipsch. Front L/R: KSF 10.5 towers, Center: KSF-C5, Surround L/R: KSF-S5, Rear L/R: KSF-8.5 towers. Extra set of SB-1 bookshelf's. I have the SB-1 bookshelf...
  4. Receivers, Amps, and Processors
    I have an Onkyo TX-NR1007 receiver that has multi-zone capability (Zone 2 and Zone 3). I've never used multi-zone before and for years have been just using it to power my 5.1 system in our living room. At night, sometimes my wife likes to listen to movies much quieter than I would. Sometimes...
  5. Receivers, Amps, and Processors
    I picked up an tx-nr1007 that has a strange malfunction, it will not output sub signals in digital dsp modes and right -height -wide -zone 2 pre-outs don't output either. but when I check the speaker terminals for r-wide-height-zone2 I get idle voltage when I select those channels. I can get...
  6. Audio Gear
    Selling my premium Onkyo Reciever as I'm upgrading my theater. This is one of Onkyo's top of the line full feature recivers, has all the features including Audessy EQ, THX, etc. Full specs here: http://www.us.onkyo.com/model.cfm?class=Receiver&m=TX-NR1007 The receiver is in perfect...
  7. Receivers, Amps, and Processors
    I've got two amps handy and my Onkyo TX NR1007 - let's compare the FR on these three and see how much variance there is in audible frequency between these audio power sources. Anyone care to hazard a guess on the result? I'll be measuring the FR response of a pair of eD Cinema 12s. For the...
  8. Receivers, Amps, and Processors
    I currently have the following Sources, AVR, and Display: Sources TivoHD DVR (720p Output, SBS 3D from Comcast) HTPC (720p or 1080p out, SBS 3D Content... AMD Athlon II X2, GeForce 210) Sony BDP-S570 3D Blu-Ray Player (720p or 1080p out, Frame Packed 3D from Blu-Ray discs and Built-In...
  9. Receivers, Amps, and Processors
    All, please accept my apologies if this is not the right place to post my concerns. I have owned a Onkyo TX-NR1007 for the past 2 1/2 years and have been very happy with it. However, last two weeks RIHD / HDMI Control is refusing to function. I had gotten used to the automatic turn off...
  10. Receivers, Amps, and Processors
    I know that my Onkyo TX-NR1007 is an older model system, but I was wondering if some could help me on what the best set-up would be for this receiver. My set-up consist of a Panasonic TV TH-50PX600U, Panasonic BR BD85 and 8 Energy satellites along with 2 Energy center speakers (not sure if you...
  11. Receivers, Amps, and Processors
    My Onkyo NR1007 stopped making any sound via HDMI. The image is fine, but there is no sound. It also does not show any speakers on the diagram of active channels or shows only SW (but subwoofer does not make sound anyway). Turning the receiver on and off repeatedly eventually brings sound back...
  12. Receivers, Amps, and Processors
    Having some trouble with my Onkyo 1007. One day I turned the unit on and couldn't get sound out. I've looked through troubleshooting in the manual and searching on the forum, but I am still having trouble. Tried resetting the receiver to factory defaults several times and not luck. Setting...
Top