AVS Forum banner
onkyo tx nr1010 network a v receiver
1-19 of 19 Results
  1. Receivers, Amps, and Processors
     Hi friends, I am seeking your expertise advice. I am going to upgrade my AV receiver from Pioneer SC-LX52. My setup is: Panasonic TX-P60ZT60E                 http://www.panasonic.com/no/consumer/viera-tv/plasma/tx-p60zt60e.html Dali front speakers:         Suite 1.7...
  2. Receivers, Amps, and Processors
    It's been a while since I've posted anything in the forum, but after 15 years of service from my Pioneer Elite VSX-27TX it's time to upgrade. I'm currently considering the Denon X4000 or the Onkyo TX-NR1010. I'm open to others as well, but these two are in my price range and have Audyessy which...
  3. Audio Theory, Setup, and Chat
    I just hooked up a new receiver, NR1010, and when I do this, I check each channel for noise. To do this, I put it on my PS4 and turn the volume up ( has a signal coming in but nothing playing), and I noticed when I get around the +5 mark, I can hear some hum from the sub. It isn't audible at...
  4. Receivers, Amps, and Processors
    I have seen some of Onkyo's AVR's have Audyssey Mult EQ XT32, but I haven't found 1 that actually says it has Sub EQ HT. I know Denon makes receivers with Sub EQ HT, just wondering if Onkyo does and if not why?
  5. Receivers, Amps, and Processors
    Looking for a receiver/pre-amp with Audyssey XT32 to be used as pre-amp. I have the Denon X4000, Onkyo NR-1010, Onkyo NR-818 in mind. My current setup is a 5.1 and have plans to make it a 5.2 in the next year. I read in the Audyssey website that all XT32 units support Sub EQ HT so having .2...
  6. Plasma Flat Panel Displays
     Hello all.   I own a Pioneer PDP-506PE whose A/V receiver is broken. It had an hybrid system cable with two connectors (black and white). It seems that the white connector is a dvi-d or dvi-i cable (video) and the black one is some sort of propietary cable for connecting the audio.    ...
  7. Receivers, Amps, and Processors
    So I'm looking to replace my Onkyo 876 in my greatroom (20x30', 14' vaulted ceilings and opens up to the dining AND kitchen). Currently have a 7.1 setup with Aperion 6T's/6C (6ohm) up front and 5B's running surround rear/side duty and a HSU ULS-15 rounds it out. The 876 works fine (my 3rd...
  8. Receivers, Amps, and Processors
     I think I've narrowed my search down between 2 units. I found a decent deal on a Onkyo TX-NR828 and a Marantz SR5008. I wish I could get the SR6008, but I have a credit with BestBuy and they don't offer the 6008 ATM.   The Onkyo has more features, but I have concerns with the HDMI failures...
  9. Receivers, Amps, and Processors
    I am looking at these: Yamaha rx-a 2030 Pio LX-57 Onkyo TX 828 Marantz 6008 to replace my old and retired Marantz 5006 Which of these would be most desirable and most joy to own in my 7.2 hometheatre ? PS Since I am living in Norway, these four brands are the only available, and...
  10. Receivers, Amps, and Processors
    Hey there guys, I'm quite confused. I'm considering the 7800 or 6800, I've been a Marantz owner for a long time and was planning on keeping it that way. I'm going to get a Panisonic VT60 and was speaking with what I think is a knowlegable person on AV. He told me to go with Onkyo 4520 or...
  11. Receivers, Amps, and Processors
    Dear All: may i ask if the current Onkyo brand new AVRs, i.e. the 929 Onkyo, and similar, more reliable? as you will see below, this is my 2nd Onkyo which died. my Bedroom system's previous Onkyo AVR died last year. Now, my Living Room system's Onkyo 3008 AVR just died! my Living Room...
  12. Receivers, Amps, and Processors
    I went in to enquire about onkyo av receiver TX NR 818 but they told me they have run out of stock and won't be getting any more supplies of 818 as it is being replaced by a newer model in the same series. The closest they have to 818 is NR 1010. My question is whether NR 1010 better than (or...
  13. Receivers, Amps, and Processors
    Hi all, I'm a long time lurker and first time poster. I've narrowed down my purchase to either the Onkyo tx-nr818 or tx-nr1010. There's only a $200 difference....should I jump on the 1010? I don't need the zone 2 video capabilities, but I was wondering if the push pull amp in the 1010 would...
  14. Dedicated Theater Design & Construction
    He owns everything else in this house, figured better make it his Cinema too: This will be a slow build so don't expect it done in a month like some of BIG's builds!! Two jobs, a puppy and a 5 year old are enough to keep me pretty busy! Details of build: Framing/Drywall/Sound Isloation...
  15. Audio Gear
    Refurbished Onkyo TX-NR1010 7.2-channel home theater receiver, Internet-ready. Local pickup only in the Washington DC, VA. or MD area. 3D and 4K upscaling capable. Onkyo's TX-NR1010 receiver comes packed to the gills with audio and video features for home theater enthusiasts. Its THX® Ultra2...
  16. Audio Gear
    I have up for sale, two brand new Onkyo TX-NR1010 A/V Receivers , both going for $1100/each. These are both unopened, new in box. I'll throw in UPS Ground shipping for free, however, buyer will need to cover insurance, expedited requests etc. If for whatever reason you may be interested in...
  17. Receivers, Amps, and Processors
    TX-NR1010 Special Features 9in/2out HDMI Support for 3D Video and Audio Return Channel THX Ultra2 Plus Certified Network Capability Delivers Internet Radio and Network Streaming Dual Core Video Engine w/ HQV Vida and Marvell Qdeo™ Processing MHL™ (Mobile High-Definition Link) for Smart Phone...
  18. Receivers, Amps, and Processors
    Why no love for the Onkyo TX-NR1010? Everyone seems to be talking about the 818 or the 3010/5010. As someone who only has a 5.2 setup, I like the idea of a really nice 7ch receiver instead of a 9ch. Any thoughts???
  19. Receivers, Amps, and Processors
    I only use 5 channels currently. It is possible I would add two more for 7 down the road but no more than that. I like that the Denon has been around for a while, has a ton of reviews and a bit cheaper. The Onkyo seems to be a bit more future ready and if it is easy to use I would use it to...
1-19 of 19 Results
Top