AVS Forum banner
onkyo tx nr905 receiver
1-17 of 17 Results
  1. Audio Gear
    This is my Onkyo TX-NR905 in Silver. I had sold it to my best friend back in late 2008, early 2009 as I was an Onkyo dealer back then. Back in 2011 he upgraded to the 5008 (Which I also sold him) and I took this as a trade in and have owned it ever since. It truly is in great condition and...
  2. Remote Control Area
    I recently purchased the iRule software, primarily to have control through some of my component's RS232 devices. However, after setting up iRule and getting my devices working great via RF, I took a stab at RS232. It seems to be a complete catastrophe at this point. After realizing I had some...
  3. Home Theater Computers
    Hi all, sorry for my poor english. I got a big problem with the E2PROM ERROR after updating my device with firmware 1.08. I read in this forum that a downgrade to 1.05 can solve this problem. Does anyone has this firmware for me? All the links I found are dead.
  4. Audio Gear
    I'm selling my Onkyo TX-NR905 receiver, that I purchased from Value electronics circa 2007 Included is the original box, manual, remote control, setup mic and power cord It is in good working order This thing is a Beast and weight about 55lbs. Boxed it is 60+. Due to the size and weight of...
  5. Blu-ray Players
    I have a hard drive with MP4/AC3 files on it. Also some AAC files. I plugged it into the USB port of my DMP-BDT220 player. It recognizes the files and plays the MP4's with the AAC audio files. However, the files with AC3 audio play with video but no audio. Is this because it won't read or...
  6. Receivers, Amps, and Processors
    Ok so i took a big leap of faith and purchased an Onkyo tx-nr905 from a guy off craigslist today. I didn’t have time to meet him and test the receiver's HDMI functions. The guy swore up and down that everything functions as it should and I would be happy. I knew i was taking a big risk...
  7. Audio Gear
    Presented for sale is a used Onkyo TX-NR905 7.1 Channel Home Theater Receiver (Black) in mint condition. All manuals, accessories, and the original box are included. The remote control has never been used, as I have programmable remote control, so there are no sticky buttons or food residue...
  8. Audio Gear
    USED but in absolutely mint condition. All manuals, accessories, & original box included. Buyers pays shipping. PayPal preferred. THX® Ultra2 home theater receiver with HDMI switching and upconversion (Silver). - 140 watts x 7 into 8 ohms (20-20,000 Hz) at 0.05% THD - THX® Ultra2...
  9. Receivers, Amps, and Processors
    id like to get a different receiver to start my upgrade season im gonna be having but i cant really go all out. so i see that the 818 is pretty close spec wise and doesnt have that annoying "i get too hot" problem... (the heat hasnt been a issue as i have a thermal controlled set-up with 6 high...
  10. Blu-ray Players
    if i set the oppo to do all of the decoding, then ran hdmi to the onkyo, is that equivalent to doing the same thing with the analog outs? For anybody with a similiar set up, do you think the oppo dacs are better than the onkyo? The reason i ask is i have a pioneer elite sacd player, that when...
  11. Receivers, Amps, and Processors
    Help....for about a year now, my Onkyo TX-NR 905 has been making "clicking" sounds. It can occur in any source (Apple TV, Roku, Cable TV) and can occur in any of my 5 speakers. It is driving me and my family nuts. I'm just about to buy a new receiver but wanted to see if anyone could diagnose...
  12. Audio Gear
    We are downsizing our house and no longer have room for these great speakers. I am the original owner and they work perfectly. The Axiom speakers have a custom color and are gorgeous. There are a few nicks from moving once before, which can be seen in the photos. List of items (retail $): 1...
  13. Receivers, Amps, and Processors
    I have a Onkyo TX-NR 905 receiver. I have Direct TV HD DVR that is 3D ready, and I have just installed a Panny TC-P65VZT50 3D plasma TV. When I went to DTV's 3D channels, it says either my display device and/or my receiver is not 3D.I know both are 3D Compatible. I am passing the video feed...
  14. Receivers, Amps, and Processors
    Hi All, I just got one of these and I am using it with MKSOUND speaker and subwoofer, I can get all the speakers working but am having problems with the subwoofer. When I use the test in the speaker setup I can hear the subwoofer but not when watching anything, any idea on how I might setup...
  15. Receivers, Amps, and Processors
    I've had my TX-NR905 since 2008, and heat has always been a challenge. To that end I've always kept at least 6 - 8" above it free (with fan venting directly to the outside of the cabinet, used a mesh door for improved airflow, raised it an extra inch off the shelf for better airflow in, and...
  16. Receivers, Amps, and Processors
    I currently have an Onkyo TX-NR905 feeding some decent speakers and a Pioneer Kuro. I'm putting a second system in the basement with Monoprice inwall speakers and a new plasma. Would it make more sense to replace TX-NR905 with a Anthem MRX-500 or 700 (or similar Integra) and move the TX-NR905...
  17. Receivers, Amps, and Processors
    Bought my NR905 new in April 2008. In Jan 2009 the AM tuner went out. Brought it into an authorized repair shop in Chicago (i am about 25 miles from downtown), it took 10 weeks to get the amp back! Their claim was that Onyko was dragging their feet on sending them a new board. I didn't mess...
1-17 of 17 Results
Top