AVS Forum banner
onkyo tx nr906
1-20 of 41 Results
  1. Receivers, Amps, and Processors
    Has been a few years since wading in and buying anything new. My H/K AVR525 died, so looking for a replacement. Not even sure where to start. Sony STRDN1040 or Yami RXV1075B are looking good to me, and these seem to get good reviews from what I have seen? Using NHT SB3s x4 and the matching...
  2. Receivers, Amps, and Processors
    Welp my video on my TX-NR906 is fritzed, the component inputs (Wii only) are displaying jiggles and a bit before that the FM tuner quite all together. The Tuner part can not be replaced, and I got a quote of 504.00 to repair the video board. I am tempted but started looking at other receivers...
  3. Receivers, Amps, and Processors
     I JUST GOT A USED ONKYO REVEIVER TX-NR906 AS A GIFT, BUT WHEN I CONNECT POWER CORD AND  TURN IT ON IT JUST MAKES SOME CLICKING NOICES AND THEN IT TURNS OFF, DOES SOMEBODY KNOW WHATS WRONG THAT COULD HELP ME HERE, I TRY TURNING IT ON AGAIN AND IT DOES THE SAME THING OVER AND OVER AGAIN
  4. Receivers, Amps, and Processors
    There have been discussions about HDMI being inferior in most implementations to SPDIF due to Jitter. However, after some hours of searching both here and with google, I cannot find tests and references to prepro's and receivers and their jitter. Every single device claims "ultra-low...
  5. Receivers, Amps, and Processors
    Can I hook an altec Lansing ADA855 subwoofer to the above receiver? The sub is from a 5.1 computer set up I believe the previous owner left it here, when we moved in.
  6. Receivers, Amps, and Processors
    Hello, I have tried to update the firmware on my TX-NR609 but unfortunately, while it was 60-70% completed, the electrical power was shuted down so the firmware update was interupted. Now all I can see is "onkyo" on my TV, and it stuck there. I noticed that I can play music through USB, all...
  7. Receivers, Amps, and Processors
    I just moved into a house with a dedicated theater room. The receiver that is being used to power a 7 speaker setup has a bad hdmi output and will have to be replaced. It is an Onkyo 876 receiver. I am looking at either replacing the receiver or possibly getting an amp and processor if its...
  8. Receivers, Amps, and Processors
    Hi, I got an amazing deal on the 727 receivers, and got one for each room. I have 7.1 in the basement and 5.1 in small living room. Does anyone have any links for sites or docs that might give a great over view for all of the settings in the rcvr? This receiver has a ton of new feature...
  9. Receivers, Amps, and Processors
    I am awaiting a response from ONKYO on the following post. Currently I don't know where to turn, buy new TX-NR3010, move away from ONKYO but to where? Anyone want a TX-NR906 for spares? Sent it for repair, got charged 600CHF for the benefit, new HDMI board, within 14 days it blew up with the...
  10. Audio Gear
    I got the upgrade bug so I'm selling my reliable and well-performing Onkyo TX-NR 509. I've had it for about 16 months and it's served me very well. Features from Onkyo's site: HDMI Support for 3D Video and Audio Return Channel Network Capability Delivers Internet Radio and Network Streaming...
  11. Receivers, Amps, and Processors
    I just purchased this receiver & love it. My only issue: is there Bluetooth capability in zone 2 (powered) while using a separate input for the main listening area? I know i can use bluetooth in both zones (simultaneously), but cant figure if they can be separated. Any help would be greatly...
  12. Receivers, Amps, and Processors
    Hello, long time lurker of this forum, decided to register today. I decided to start a new thread because the search function didn't return anything. Does anyone have any information on the new AVR receivers that Onkyo will launch this spring. As I understand the new X2X receivers will add...
  13. Audio Gear
    Revamping my system selling my great Onkyo tx-nr818 receiver. Latest firmware inc the 24fps update all accessories inc box . Price includes shipping cont us and pp fee. This is a great price for an almost new unit price is firm. Good feedback on audiogon and videogon as bobaudiovideo. Pic via...
  14. Audio Gear
    Near mint condition Onkyo TX-NR 3009. Perfect functionally, near mint cosmetically. Box was pretty roughed up during shipping to me so it would have to be repacked to ship to someone else. Shipping and paypal extra. Please contact me for more information.
  15. Video Processors
    Needs some help. Before I send the Darblet back I figured I'd ask the experts if there might be a work around. Onkyo TX-NR906 (HDMI 1.3a) >>>>> 3 ft HDMI cable >>>>DARBEE Visual Presence DVP 5000 DARBLET HDMI High-Defintion Image Enhancer>>>> Panasonic PT-AE2000U (Non 3D) projector, 30 '...
  16. Receivers, Amps, and Processors
    So I've been looking into price points, deals, threads on various forums, etc. etc. I'm trying to figure out if I would be missing anything magnificent between purchasing the Onkyo TX-NR 709 or the Onkyo TX-NR 809. With the first option, the budget allows for an additional amp like the Onkyo...
  17. Speakers
    I have the following gear Onkyo TX-NR906 Main Speakers - Definitive BP 7004 Centre - Definitive C/L/R 2500 Surrounds - Definitive Pro Monitor 1000 Does this combination mix well . I am not planning to keep any subwoofers as my main and centre has built in Subwoofers. What would be...
  18. Audio Gear
    Selling a very lightly used receiver. It is in mint condition with all factory items and packaging. Free shipping in the Conus, but please add the 3% PayPal charges if that is your method of payment.
  19. Receivers, Amps, and Processors
    Help....for about a year now, my Onkyo TX-NR 905 has been making "clicking" sounds. It can occur in any source (Apple TV, Roku, Cable TV) and can occur in any of my 5 speakers. It is driving me and my family nuts. I'm just about to buy a new receiver but wanted to see if anyone could diagnose...
  20. Receivers, Amps, and Processors
    Just got a new 735U Sharp 70" LCD to hook into my Onkyo 906 and the HDMI handshake takes > 15 mins+. That can't be normal, can it? Does anyone else have that type of issue?
1-20 of 41 Results
Top