Search Results for ‘onkyo tx sr707 7 2 channel a v surround home theater receiver’

 I have a new Samsung Smart UN65F8000AF LED 3D TV.   I also have a Sony 3D Blueray player, Motorola HD Cable Box and a HD Satellite receiver. Although each of these components is only a year or two old none of them have 2 HDMI out connections.   Because I was having issues with the HDMI...

I am thinking about getting a russound x75 to power my mains , which are polk monitor 60's.Right now I have them hooked up to my onkyo tx-sr707. The 707 is powering my mains and center, I use no surrounds at this time.Will I get better sound powering mains with russound x75 and center with...

 How do I connect my JVC XL-R5000BK CD Recorder to my Onkyo TX-SR707 AV Receiver?

 does any one have one of these recievers I am having problems with mihe  thanks

I bought my Onkyo TX-SR707 back on 12/31/2009; and over the past few months, it needs to warm up for what seems to be about a 1/2 hour before the sounds comes on. I used to be able to turn it off, then on; sometimes a few times; but it would start to work. Last night was my last straw with...

 Hi Guys,   I have a Verizon FiOS set top box that I would like connect to a Samsung LED TV and an Onkyo TX-SR707 receiver. I picked up a passive splitter from monoprice and found that I could only output to one device at a time. I really want to be able to output to both devices...

I finally upgraded from a 707 to the more current 818. All of my source inputs are working so far with the exception of the Roku stick. I have it plugged into the front MHL- HDMI and it is getting power. In AUX Remote Mode screen set-up, what category is used for the Roku stick? I have RIHD on...

Does anyone know what the multichannel power ratings are for the TX-SR707? I'm currently using it to drive my 4 surrounds but am looking to upgrade to the emotiva umc 200 pre/pro which would mean I'd have to get an amp for the surrounds. So if I do get an amp for the surrounds I'm curious how...

Have a 4 year old Onkyo 707, works great, have never had any of those issues reported by other Onkyo users. Unit has always been well ventilated and probably only used on average 2-4 hours a day. see specs here http://www.onkyousa.com/Products/model.php?m=TX-SR707&class=Receiver I am...

My uncle donated his Onkyo Tx-SR707 amp and Yamaha YST-SW100 sub to me the other day. My current TV is set up in an enclosed 12'x12' square room. I am wondering what sort of satellite speakers I should purchase to accompany this setup. Is there anything in particular I should look for? I am...

I had an onkyo 707 and had what many had back then which was the infamous sound failure. Onkyo fixed once right before the 2 year mark. They chose to do a cheap fix which was to "reflow the circuitry" instead of doing what the better fix is and replace the hdmi board. 1 month later once again...

As the subject indicates, Windows only notices if the receiver is connected if the projector is on. Here's a map of the setup: Video Card receiver HDMI in; receiver HDMI out Projector video in Motherboard receiver Digital Audio In 1 So why can't the receiver "hear" my computer wants...

Hi all, apparently I've decided to upgrade my HT system since I bought the LN60F8000. I've upgraded my Onkyo 707 to a Denon 3313 and now trying to figure out what speakers to go with. I started discussing speakers in the thread I started asking help with the receiver but thought I would ask in...

Hi all, I am currently going through a dilemma. I just upgraded my TV to the UN60F8000 and now I have to figure out if I should keep my current receiver (Onkyo TX-SR707) or upgrade. The 707 doesn't have 3D pass-through capability so that is the big problem. I am using my PS3 as my Blu-Ray...

The TX-SR707 even not being used will get to molten hot temperatures that the internal components is probably not rated for which WILL cause the high failures you're seeing. Or even cause the soldering joints to warp like in xbox's RROD overheating issue. Take into consideration the lack of...

Unfortunally an firmware update went wrong on my Onkyo TX-SR707 receiver, now I can only see MMPU setting in the screen. So I bought myself a donor TX-SR707 with a broken housing and used the HDMI board as I thought that it would be the cause. Only after replacing the hdmi board I still have...

I was wondering if anyone has had any listening experience with Tannoy V4 floorstanders and the Emotiva XPA-3 or any of the XPA models, using some kind of reciever as a pre-amp? The one thing that has me worried is my room dimensions it's a very awkward room to have a HT in or even 2 channel...

I have a Onkyo TX-SR707 and i am having problem with the left rear channels dropping audio. I get static some times, but then sometimes i hear very little sound, and then sometimes i get nothing. Also when i lisen to music , i.e. aux ipod hook up 3.5mm to left and right audio inputs to front of...

Bought my 707 2.5 years ago, and have absolutely loved it! Two weeks ago, turned it on, and no sound. Realized after turning it off and back on again several times brought the sound back. In the past two weeks, the sound has never worked the first time, I leave the receiver on for 5 minutes...