AVS Forum banner
onkyo tx sr876 receiver
1-20 of 23 Results
  1. Receivers, Amps, and Processors
    Hello AVS-members, I was wondering if some of you would give me a bit of advice. I bought a used Onkyo 876. Tested all audio and hdmi inputs and outputs but naturally forgot to check the analog video-in sections (my mistake). I have discovered that connecting component in (any of the three...
  2. Receivers, Amps, and Processors
    I have the Onkyo TX-NR1007 receiver and confused on what power I can expect when using 4-ohm speakers. The speaker impedance section in the manual says: Other specs from the manual (page 153) say: When I'm looking at speakers, what power can I expect this thing to deliver -- 270W...
  3. Receivers, Amps, and Processors
    Hello all, I am looking for suggestions to replace my current avr. It is a TX-SR876 with HDMI issues. I have tried replacing the caps as suggested in other threads with some success but it is still frustrating. So now I am looking for suggestions what to buy as an equivilant replacement. I am a...
  4. Receivers, Amps, and Processors
     Well in the process of pulling my HDMI daughter board I broke one of those big caps with 470 M89 on the top of it. What can I get to replace it with? I cant find a thing on them. I do appreciate all the info on changing out the little caps that go bad. I was one of the lucky ones I guess...
  5. Receivers, Amps, and Processors
    There have been discussions about HDMI being inferior in most implementations to SPDIF due to Jitter. However, after some hours of searching both here and with google, I cannot find tests and references to prepro's and receivers and their jitter. Every single device claims "ultra-low...
  6. Receivers, Amps, and Processors
    So I'm looking to replace my Onkyo 876 in my greatroom (20x30', 14' vaulted ceilings and opens up to the dining AND kitchen). Currently have a 7.1 setup with Aperion 6T's/6C (6ohm) up front and 5B's running surround rear/side duty and a HSU ULS-15 rounds it out. The 876 works fine (my 3rd...
  7. Receivers, Amps, and Processors
    Looking to buy a new AV receiver. I have some options, I can buy either a new mid-level receiver or a higher end but older receiver. I'm not sure which receiver option is the best, but here are the options: USED Onkyo TX-SR876 - $500 - USED Denon 3311 - $500 NEW Sony STR-DN1040 - $500 NEW...
  8. Receivers, Amps, and Processors
    Just got Wharfedale Denton and connect it to Onkyo 876 zone2. Sound is ok but if I crank volume up, it seem that there is not enough power to drive Denton. Speakers sound distort. I'm willing to replaced with new AVR that has more muscle. What I need is 1. Powerful zone 2 Output 2. DLNA...
  9. Receivers, Amps, and Processors
    I just moved into a house with a dedicated theater room. The receiver that is being used to power a 7 speaker setup has a bad hdmi output and will have to be replaced. It is an Onkyo 876 receiver. I am looking at either replacing the receiver or possibly getting an amp and processor if its...
  10. Receivers, Amps, and Processors
    Hi Folks, I replaced an Onkyo 876 with dead HDMI board after 3 years with an Onkyo 818. I felt pretty stupid replacing it with another Onkyo, but they do offer tremendous value (on paper). Now the 818 has died - picture, but no sound; others have experienced the same issue. I may get the...
  11. Blu-ray Players
    Hi all, I hope i put this in the correct board, I wonder if this is possible, Having a BR player with dual HDMI out and one or more HDMI in (like the oppo 103 or similar) Because i do not have a 3D capable reveiver (Onkyo TX-SR876) i want to connect the BR player with HDMI1 to the beamer...
  12. Audio Gear
    Up for sale is an Onkyo 705 receiver I bought from a member on here. This receiver only has one issue, the audio doesn't seem to output over the "Game" HDMI input. Other than that, everything functions perfectly. Price doesn't include shipping, shouldn't cost too much, I'll give a good deal on...
  13. What's Your System Configuration
    Before Renovation New Floor First..... Painting Walls and Ceiling lights on ~~~ now, its done ~~~ My Theater Set ups Panasonic AE7000 Full HD 3D Projector GrandView Screen LF-MIR 100 Onkyo TX-SR876 Klipsch RF 82...
  14. Receivers, Amps, and Processors
    Hi I have recently relocated to Australia taking with me my LG LE7900 TV and onkyo receiver. The trouble is, this LG TV didnt allow me to change the region settings to receive free to view TV straight through the aerial so now I have to buy the TEAC digital receiver. The TV and receiver work...
  15. Receivers, Amps, and Processors
    Hi, I'm planning to buy a New Home Theater. I would like to make a comparison between these 2 budget receivers and then ask your opinion about them. As I know here FM have much more experience with AVRs, they can point out the specifications which looks good on brochure and which do matter...
  16. What's Your System Configuration
    Waiting on my new house to finish being constructed and in the mean time I'm making the wait seem worse by counting the minutes and planning for my theater room. I haven't posted in a while but I've upgraded a few things since my last thread here . I sold the TV and entertainment system, also...
  17. Receivers, Amps, and Processors
    Just bought a Onkyo TX-SR876. Mainly to listen to two channel (input) music at higher volumes. Have 2 Infinity SM152’s, two Cerwin Vega D7’s, a couple of Bose 301 series II and a Polk PSW505 12” sub. I know, what a mix of old speakers… I would like to run all the channels with full volume at...
  18. Home Theater Computers
    I just moved from the Marantz SR-5005 to an Onkyo TX-SR876 because I wanted to upgrade from Audyssey MultEQ to Mult EQ XT and could make a good deal on the Onkyo. Tonight I fired up my HTPC in order to play a Blu-Ray movie. Unfortunately NO SOUND. I checked the Nvidia Control Panel and the...
  19. Receivers, Amps, and Processors
    I just moved from the Marantz SR-5005 to an Onkyo TX-SR876 because I wanted to upgrade from Audyssey MultEQ to Mult EQ XT and could make a good deal on the Onkyo. Tonight I fired up my HTPC in order to play a Blu-Ray movie. Unfortunately NO SOUND. I checked the Nvidia Control Panel and the...
  20. Receivers, Amps, and Processors
    So the other day I came back from a vacation and went to turn on the tv and the the receiver said it was receiving no signal via hdmi from the cable box. Because it was late and I didnt have the energy to mess with it I turned on the playstation to watch some netflix and ran into the same...
1-20 of 23 Results
Top