AVS Forum banner

output

  1. Receivers, Amps, and Processors
    Hello all. I'm new to this forum and thought I'd throw out an issue that I been having with my vintage avr-3600. Hopefully someone can help. The problem is that sometimes when I power it up the volume output is low across all channels. It's almost as if it's only putting out about half the power...
  2. Receivers, Amps, and Processors
    Hi everybody, I'm writing in this forum for the first time because I'm looking for a mixer and I need some suggestions. I have in charge to setup a meeting room with the a/v equipment and I would like to know if exists some digital mixer with 10-15 inputs and some GPO or relais output for aux...
  3. Receivers, Amps, and Processors
    I have a new-to-me pioneer elite vsx-90 that I am having trouble setting something up for. Pioneers are often tricky with wording for what they call things in the manual and though i have read the whole manual I cant seem to figure this out one. I have two inputs, and two outputs inputs 1)...
  4. Receivers, Amps, and Processors
    I've been having a problem with my AV Receiver for about a year now, and it's been getting progressively worse. In order to get output to my TV, the HDMI connector has to been in an increasingly precise spot, and needs to stay in that exact position or else I lose output. Interestingly, the...
  5. Audio Theory, Setup, and Chat
    I recently moved and in my new home there is a speaker system spread across the main floor, I have found the input to the system but I do not know what style of cable I need to utilize this system, letting me know what the cable type I need is would be extremely helpful, there is an attached...
  6. Cable, Digital Cable - Non-HDTV
    I'm interested in any information on a device that would enable me to convert coax output from my cable box to composite video/audio output. Any information would be much appreciated.
  7. Receivers, Amps, and Processors
    I picked this up at a second-hand shop yesterday for ten bucks and I can't determine what type of connector the outputs are. Can anyone shed some light?
  8. Speakers
    Okay, I am a just starting my home setup and I plan to do some mixing. Originally all my output sound ran through my LG HTIB system. (LHB975) But I just recently bought a Scarlett 2i2 and some preSounus speakers. My question is should I still run my output through my HTIB with the upgraded...
  9. Subwoofers, Bass, and Transducers
    Hi Guys, I have a yamaha RX 375 av receiver along with yamaha NS-PA 140 speaker set and yamaha YST SW 216 sub woofer. For a few months it was working fine but over the last couple of weeks i noticed that the sub woofer is not giving any sound. Then i performed the YPAO setup and during the...
  10. Audio Theory, Setup, and Chat
    Hello guys, I really need your help on this one... So I've finally managed to get a very intresting cable (3,5mm jack to Toslink) for my macbook pro. Now I can use DTS 5.1 with my Kenwood Amp. (Who knew that the 3,5mm jack was also a digital output? :eek: ) [Note: the reason I use the...
  11. Receivers, Amps, and Processors
    Hello, this is my first time posting here, but to be honest I have been lurking for a while. Many years ago I had purchased a Sony HTDDW830 htib, which includes a STR-K502P reciever. This was my first ever full surround sound system, and I was amazed at the definition and sound quality, as...
  12. Receivers, Amps, and Processors
    Hi I'm not sure if this is right subforum for this question. Never bothered with audio stuff since everything I had to use for my PC was headphones (currently ATH-M30X) plus speakers on a single audio output (that green hole) and have no pretty much idea what can be used with what. After buying...
  13. Audio Theory, Setup, and Chat
    I know Crosleys are terrible, But i got one of those 5 in 1 things for cheap and really want audio out, The speakers are kinda junky and i prefer to listen through headphones. They dont give much room to work in these things but i think i can work with it and that i can solder in a closed...
  14. Audio Theory, Setup, and Chat
    The receiver is an integra DTR 5.4. The component output for the On Screen Display (OSD) is not working. Ive tried it on 2 tvs, with 4-5 sets of cables. My tv only senses S videos in Green component if Red and Blue are connected to the tv, but can be empty on the output side. Here is a picture...
  15. Audio Theory, Setup, and Chat
    I hope this is not annoying and hasn't been answered - if it has please point me in the right direction - but I cant get my red/white audio output to work with my Hi-Fi system. Attached is the photo that I am trying to plug red/white into. Again, sorry if this is an easy fix but I have searched...
  16. Receivers, Amps, and Processors
    Hello there. I own a Pioneer VSX-819H as my only receiver and have been using it for years now. My current set up uses all three HDMI inputs for my cable box, PS4, and Chromecast, with the HDMI output going directly to the TV. I use two speakers that are connected to the "Speaker B" input...
  17. Receivers, Amps, and Processors
    Trying to decide on a new AVR with a budget of $500. One must-have feature is 2 HDMI outputs so that the system can power my living room with 5.1+video and my bedroom with 2.0+video. This desire seems to limit my choices quite a bit and I seem to have decided between either the Denon avr-s900w...
  18. Receivers, Amps, and Processors
    I am just beginning my home audio setup. I do not have a surround sound system yet, just the tv integrated speakers. I would like to know how to best optimize the sound quality with the hardware I have. My digital cable box has a stereo and surround sound option for audio output. Which...
  19. Subwoofers, Bass, and Transducers
    Hello All A buddy of mine asked me a question today I can't answer. What type of signal is outputted from a subwoofer pre-amp output or a subwoofer out? I know that LFE output are strictly the lower sub-frequencies (roughly 20–200 Hz) at line level, but what frequiecies do the subwoofer...
  20. Receivers, Amps, and Processors
    I had questions and someone sugested I start this thread, I hope I dont step on any toes, I'm not a Moderator or Special member or anything. I'm researching my new reciever to get and am very intereseted in the 4310, mainly because of the new stuff like ABT. I just wish I could get it for the...
Top