Search Results for ‘panasonic viera tc p60gt50 60 inch plasma tv’

 I have a YSP4000 soundbar and a Panasonic VIERA TC-P60GT50. The soundbar receives the Directv (Genie) signal and handles the sound while passing the video to the Panasonic. This all works well but for 1 wrinkle. Using the Genie remote I can turn on the TV and the DirecTv box. The Yamaha needs...

Hi, I have a Panasonic TC-P60GT50. I turned it on today and suddenly the screen is much more dim and it appears to flash lightly like it wants to go out. While it is on it fluctuates from almost completely black to almost watchable. Yesterday when I turned it off it was working perfectly. I...

 I'm looking for good Settings on a Panasonic GT60

 Hi,   Got a 50GT60 recently and while I'm broadly impressed with it I must say it suffers from quite bad dithering on mid panel luminance (dark shades and shadow detail are affected the most). The dithering is still noticeable at a viewing distance of 8ft and above.   Picture settings are...

I have the following Panasonic GT60 tv Yamaha RX-A1020 receiver Suddenly i can't seem to get the two to connect. I have tried both outputs on the receiver and all the inputs on the tv, multiple HDMI cables. The odd thing is that i can connect my laptop to all the HDMI inputs on the tv...

When I turn on TV not a fullscreen home is set. I see small last input used window and dvb-t program guide on the right. And I don't need that. How to make my tv show the full screen of the last source? Turning off tv on full screen Home doesn't help. Thanks.

 IMG_3361.JPG 2855k .JPG fileBeen using a Sony Soundbar/sub HDMI switcher system with my Panny 60GT50 plasma and the switching is starting to falter in it so it is time to move to a 2.0 or 2.1 system using the new Yamaha RC-V673 I just received. House is steel framed and on slab(with no easy...

 Hello!   I am currently looking to upgrade my current TV(32 inch Toshiba Regza) and I need something a little bigger, better and of course full-hd. The TV will mainly be used to play PS4, and watch movies. Will be sitting around 2.5-3 meters from the TV and I have no direct control over...

 Hello folks I am a new owner of a P50GT60 and I love everything about that TV and its quality except there is a small issue.   First of let me tell you about the TV settings and mainly the fact that I have Intelligent Frame Creation set to Max. Yes yes I know, but I love the soap opera...

Just downloaded the newest firmware. V1.19 i have looked at the panasonic site it only lists the v1.17 as the latest. Anyone know what they changed with v1.19

I've been reading these forums for about a year, but I've never posted anything. Since reading these forums I have purchased the Outlaw LFM-1plus, Panasonic 60GT50, and the Yamaha RX-A2020. I love all 3 of these components. Currently my speakers are the following (all Polk): TSI300 fronts, CS10...

 As the Title says, Im trying to figure out what TV would be suit my needs.   Ive been reading reviews of TVs up the wazoo, and been reading pages and pages of threads from other forums, (though mostly been stalking this one) and while ive gotten a lot of knowledge of TVs, its hard to figure...

Hello gentleman, I am currently running a 2.0 home theater system and just purchased a center channel. I will be picking it up tomorrow. Understanding that it is a bit late to ask this question but before I go through with the setup I wanted to ask before hand to see if I should be prepared...

I purchased a 50" GT50 HDTV a few days ago and I absolutely LOVE it! The picture is amazing. I was playing around with the picture modes though and i noticed one called "THX Cinema". How is this different from the regular "Cinema" mode? When i switch between them all that's obvious is that the...

Hello Guys, I recently purchased a display model Samsung PN51D7000, which is a 2011 model though I was told that it was "last years model" which as far as I am concerned was 2012 and 2011 was two years ago. So I contacted the folks at Magnolia and told them I want a different TV. I had looked...

I'm selling my 60" GT50 used only for 6 months. What could be a good price to sell it? I'm moving and I have to sell it, otherwise I have to move it from Montreal to Calgary here in Canada. Please advise me keeping in account prices in Montreal. Thank you,

I have a number of old-time stereoscope cards, each with two pictures. I tried scanning a few, and using a graphics program to make a single JPG for each pair, with the pictures side-by-side. I loaded the finished JPGs on a server. I can view the pictures just fine via DLNA on my Panasonic...

When viewing at a distance of a few feet, with Blu-Ray input and HDMI cables...(I have tested diff. HDMI cables and bypased my receiver to test) Actually, a few inches to a few feet away, white pixels are everywhere dancing across the whole display. If there is a way I can insert a video from...

Hi Guys, I am pretty new to this forum and not a very techie guy, I have a Sony HX 850 and a PS3. The TV is hooked up to the PS3 and the Cable box using a HDMI cable, my YSP 3300 is scheduled to arrive today. Can you please help me in establishing the connections for optimum use of the sound...

You've done your homework so you know the 3D GT50 is the second-best plasma Panasonic makes. My other HDTV is a Pioneer Kuro and this set made me move the Kuro upstairs. The GT50 is THAT good, the black levels THAT deep, the functionality THAT easy. I'm not going to take up your time listing...