AVS Forum banner
panasonic viera tc p60st30 60 inch 1080p 600 hz 3d plasma hdtv
1-20 of 46 Results
  1. Plasma Flat Panel Displays
    I've asked this question and I have not figured it out. When I first ran the D-nice slides on my 60ST30 I was able to do it with no problem. Also last month I ran a single white slide for over 48 hours without issue. Every time I try to run the single white slide again now, I get the word Viera...
  2. Plasma Flat Panel Displays
    Dealing with Panasonic Canada and the techs they send to view my set. My set has a green blob or banding issue on the centre of the TV in certain scenes with certain levels of white, gray or beige. I also see pink on the sides, but that is less of an issue. My TV is two years old (bought Dec...
  3. Plasma Flat Panel Displays
    I have bought'en 4 Panny plasmas over the last 4 years and 2 of them have blown up. My 50 50 U I bought in September of 2012 just went out. We also had a PU 85 go out in 1 month after we bought it in 2008 and it was covered under warranty. I also have a 60 ST 30 which I bought in 2011 but...
  4. Plasma Flat Panel Displays
    I'll be honest, I doubt I'll do this. Even more doubtful considering Amazon Warehouse open box deals are cheaper than then brand new Cyber Monday sales (big surprise). I have a 60ST30 that has served me well for the last 2.5 years. I wouldn't mind better black levels, and an overall increase...
  5. Home Theater Gaming
    Up till now I always ran HDMI "non standard" on my Panasonic TC-P60ST30 with all my consoles set to "Expanded" but as I was setting up my Xbox One I noticed all it did was brighten up the picture and wash out the blacks. Now after messing with it seems The best looking to my eyes is when both...
  6. Plasma Flat Panel Displays
    I currently have a TC-P60ST30 in my living room that I purchased in 2011 and a now broken TH-58PZ800U in my bedroom that I purchased in 2008. Unfortunately, the 5-year old TH-58PZ800U made a loud pop before immediately shutting off and producing a 4 blink code. After unplugging it and...
  7. Plasma Flat Panel Displays
     Hello Everyone and thank-you for your help.   I've been straining my creativity to the limits to figure out what went wrong with my tv.   I've searched 20+ pages of posts and didn't find anyone with a problem exactly like mine so I'm posting here in hopes I'm not beating a dead horse.  ...
  8. Plasma Flat Panel Displays
    Hello, I often consult this forum but this Is the first time I post for a problem related to my television. I have a tc-p60st30 and two weeks since it makes the buzzing sound, and now I've noticed that in Commercial there is a small white green line to the left of the screen and at the top...
  9. Plasma Flat Panel Displays
    I have been reading a lot of recommendations on the Panasonic ST30 for gaming (especially the 16ms input lag). I currently have a Samsung pn51d550. I have an opportunity to purchase a new 50 " Panasonic ST30 - Model #: TC-P50ST30 for $600 and wanted your opinions. Is that a good purchase or...
  10. Plasma Flat Panel Displays
    Unfortunately, our beloved TC-P60ST30 had problems that have been diagnosed as a bad panel (although I'm not 100% convinced that's correct). We're in year two of our warranty, which means Costco is on the hook for the repair. However, it doesn't make economic sense for Costco to pay for the...
  11. Plasma Flat Panel Displays
    I used to own a 52" Samsung LCD screen which I bought back in 09', while it was a decent TV I could never stand the backlight bleed, garbage black levels, which to me ruined the overall picture quality. Having just moved to California (from DC), I got rid of it along with most everything else I...
  12. Help Wanted/Seeking
    I lost my stand and I'm looking for one if you are not using it. I will need the screws as well. Thank you!
  13. Plasma Panels
    Purchased 11/6/11 from Amazon, excellent condition. Have stand, remote etc. ebay feedback: kjcramer Local Pickup in Gilbert, Arizona only. Email for photos. Best, Jim [email protected] Amazon Link: http://www.amazon.com/gp/product/B004MME774/ref=wms_ohs_product?ie=UTF8&psc=1
  14. Plasma Flat Panel Displays
    I have a st50 that has been buzzing since i had it it gets really really bad in 3d i just forget about it sometimes because i usually have the fan running. Is this easily fixed with repair by technicians or do they swap for a new one? Itd be nice to get a st60 haha
  15. Plasma Flat Panel Displays
    The other day my 50'' ST60 started giving me an HDCP error with my AppleTV. I switched all my cables and still got the error on HDMI Input 3. I switched the same cable and same set up to HDMI 1 and I don't get HDCP errors anymore. What does this mean? How can I fix this? Is my HDMI 3 port...
  16. OLED Technology and Flat Panels General
    Hello everyone! I'm setting up a small side bedroom for watching HD movies and playing HD video games. I have a couch against the back wall where I'll be sitting that is between 7-8 feet away from the screen, which will be sitting on a solid wood tv base that is 25" high and 64" wide and 18"...
  17. Plasma Flat Panel Displays
    Hi - i've narrowed down my plasma choices to these three TVs- they are all very closely priced and used. TV will mostly be used for HDMI gaming from the PC and blu-ray movies. I also want a good "Motion Smoother" (intelligent frame creation) for video games and sports. Any advice would be...
  18. Plasma Flat Panel Displays
    So I have had the panasonic p60st30 plasma since Christmas. Finally I picked up two pairs of the panny 3d glasses (3d3mu) this past weekend but something isnt working. Basically, when viewing a 3d source, the glasses will not consistantly show the images in 3d. I will stand in a certain place...
1-20 of 46 Results
Top