AVS Forum banner
pioneer elite 50 inch elite plasma hdtv pro111fd
1-20 of 25 Results
  1. Plasma Flat Panel Displays
    Can someone tell me, from a PRO-point of view, which of the following is the best TV? Looking for the best 50" Plasma I can buy for my bedroom. Always viewed in the dark, lighting not an issue. Thanks! Panasonic TC-P50ST50 Pioneer Elite 111FD Pioneer Elite KRP-500M
  2. Plasma Flat Panel Displays
    Im going crazy trying to decide on the following three options: (Used) Pioneer KURO 1080p Elite Plasma TV PRO-111FD (New) Samsung PN51F8500 (New) Panasonic TC-P50ST60 All in the $1600-1700 range. The only thing that concerns me about the Samsung is they have horrible CS in my...
  3. Plasma Flat Panel Displays
    I've heard service remote control is required to access the service menu. I have JP1 capable remotes and I can program to simulate pioneer service remote control. Does anyone has step by step instructions on how to access the service menu with service remote control? What screen do you need to...
  4. Plasma Flat Panel Displays
    I have a pioneer pro-111fd. When I check the screen position in dot by dot mode with the AVS calibration disc I can see the white lines on the bottom and right side. I tried to adjust it in the options menu but its blanked out in dot by dot mode. I was wondering if anyone knows how to adjust it...
  5. Plasma Flat Panel Displays
    Guys- I have a 5-6 yr old Pioneer elite 65 inch Plasma- Curious as to what the difference would be going to a new 65- 75 inch plasma or LCD over what I currently have now- Seems that the new TV's I briefly look at at Best buy are much sharper than my Pioneer- Is it worth the upgrade or is my...
  6. Plasma Flat Panel Displays
    Hello I have found a broken pioneer kuro plasma monitor for cheap. It does not seem to be cracked on the screen or any physical Damage to the frame either They say it receives power but does not turn on Also comes with the matching speakers I know there is no way to tell but do you guys...
  7. Plasma Flat Panel Displays
    I have a Pioneer Elite FHD-1 50" plasma that I bought years ago when they first came out. I am looking to replace it with a 60" plasma. It is between the Panasonic ZT60 or Samsung 8500. Which has the better overall picture quality? I am not interested in the sound as I am going to be using it...
  8. Plasma Flat Panel Displays
    Hello, I just moved my TV and it won't turn on. The unit is receiving power as I can see the red light inside the unit on. However, the remote won't power the TV on. Also, I tried to turn the unit on from the side panel without luck (manual without the remote.) The blue indicator...
  9. OLED Technology and Flat Panels General
    I have got no help with this in the main plasma forum and anyone I thought may have knowledge on tv repairs ahs ignored me, so figured I would post one here in case people with knowledge are more likely to be in the tech forum. I have a pioneer elite with TERRIBLE black levels. The black bars...
  10. Plasma Flat Panel Displays
    Hi... Does anyone happen to know the model number of the OEM stand for the Pioneer PRO-111FD? I spent practically the whole day looking everywhere on the internet that came to mind. Thanks for any leads you may offer.
  11. Plasma Flat Panel Displays
    DISCLAIMER This measurements were not taken by me personally. All I did I searched for reviews on the internet and compiled various measurements from various sources into single datasheet. There may be a margin of error in the data. If you think some measurements are not correct, it's not my...
  12. Plasma Flat Panel Displays
    Hey, Does anyone know where I could find replacement speakers for my Kuro pro-111fd? My right speakers is making a loud ticking sounds, it sounds like one of the small speaker has died. I believe the part number is: SMW2025. I went on http://parts.pioneerelectronics.com , but sadly...
  13. Plasma Panels
    For sale is my Pioneer Elite Kuro PRO-111FD 50". TV is in great working condition with no Dead Pixels that I can see, it does have the Kuro Buzz but is not excessive and can only hear when close to the TV. The screen does have a small hair line scratch that runs on a vertical slant on the upper...
  14. Plasma Panels
    I'm selling my TV because my wife wanted to to go bigger and 3D. I bought the TV new in 2009 and it's been mounted on my wall for the past 3 yrs. The TV comes with all accessories (not shown) including the box. The box was broken down so it would fit in my SUV, but a little tape will get it...
  15. Plasma Flat Panel Displays
    I bought this 50" Pioneer Elite Kuro in 2008 and it is obviously an outstanding TV for picture quality. I'm ready to start looking at a larger set (~60") and I need it to keep up with the picture quality i'm used to. I have had no reason to even consider another TV other then size as I know I...
  16. Plasma Panels
    Selling my loved 50" plasma. It was purchased in 2010 (ish) and to date, it has the best looking picture I've seen. Paired it with a high end BlueRay player and I was on cloud 9. Its in great condition, its been professionaly calibrated to industry standards (~$350 job). No screen burn and...
  17. Plasma Flat Panel Great Found Deals!
    Hi guys, I'm hoping someone can help me in determining what the approx. market value is for a 1-owner, never-calibrated PRO-111FD. Getting laid off and such have unfortunately led me to look to sell my precious panel, but I really have no clue what a reasonable price would be for it, or...
  18. Plasma Flat Panel Displays
    I have a Kuro Pro-111FD Plasma Display. I am going overseas to work for 1 year. I am planning on storing my panel back in it's original box. The owner's manual on page 131 states this: "Note: If you don't intend to use your flat panel TV for an extended period, occasionally power on and run the...
  19. Plasma Flat Panel Great Found Deals!
    i know i know "price is what you pay, value is what you get" i am thinking of a pro111fd, what is a reasonable price? has this kuro been totally eclipsed by newer models? im trying to squeeze blood out of a penny here... thanks everyone!
  20. Plasma Flat Panel Displays
    ive been on the hunt for a pro111 for about a month now and have very little luck . im in scranton pa . im reluctant to use ebay as id wanna see the set before i buy it.Any know of anyone selling any in my area with in a few hour drive?
1-20 of 25 Results
Top