AVS Forum banner
pre amp
1-20 of 21 Results
  1. Audio Gear
    Hello! This is my first time posting here so please tell me if I need to make any changes. Some background: Over the past couple of months I have been working on getting rid of some unused audio gear, and although for some of the smaller items r/AVexchange has been great, the pre-amp in...
  2. Audio Gear
    Very clean and well cared-for. Was paired with a nice Rotel amplifier and sounded fantastic. A ton of features in this unit - plenty of information online. No remote, but compatible remotes for this unit are plentiful and cheap - around $20. Please text me with any questions and feel to check my...
  3. Plasma Flat Panel Displays
    Hey guys, I was excited for signal sense to come to the rc1590. On paper this feature should be included with the latest version 1.43 but it didn't work for me. Anyone had has Signal Sense (2.0) working?
  4. Receivers, Amps, and Processors
    I have recently acquired a free Bose Lifestyle 5 and Acoustimass 5 sub/speakers. I want to stream from my laptop to the Acoustimass. I tried plugging straight from my laptop audio out to the Acoustimass, but it's far too loud without my laptop turned down to it's lowest volume, at which point...
  5. 2-Channel Audio
    Dear AVS forum members, After I bought an entry level denon avr for 7.2 I inmideately noticed the difference in stereo quality vs my old stereo nad amp. The difference was so big that I almost regretted my denon x1400h. At the moment I have 2 setups one for music one for movies. My current...
  6. Receivers, Amps, and Processors
    Hello, I've been reading some posts about connecting external amps like Emotiva to help drive more power to LCR speakers to achieve more clarity. What I'm not sure of is if, in my setup, I would see any benefit from adding an additional amplifier. Secondarily, would it make sense to bi-amp my...
  7. Receivers, Amps, and Processors
    HI everyone, I recently purchased a SONOS AMP to use as my main amp for my floor speakers. Prior to the SONOS setup i was using a stack of Nakamichi components including the following Nakamichi Receiver 1, (Receiver 1) Nakamichi Tape 2 Nakamichi CD 2 Sony record player In order to get all...
  8. Audio Gear
    1.5 years old. Perfect condition, comes in original packaging. Minneapolis Minnesota arcam.co.uk/products,FMJ,AV-Processor,av860.htm As one of the few audio specialists in the world to design AV receivers, Arcam has a reputation for creating a fine-grained technical specification with...
  9. Car Audio, Video, and Nav
    I am completely baffled with my issue. I have spent 10+ hours trying to diagnose it, and 4+ hours on the phone with Crutchfield to no avail. Im hoping someone with more audio experience than myself can determine the solution. Long story here.. but Ill lay out the basics first. I have a head...
  10. Home Theater In A Box
    So I got my trusty Onkyo HT-S790 setup again after being in storage a few years and all seems working good (forgot how nice it is to watch TV/Xbox/DVD in 7.1 surround) and I've got a bunch of stuff connected - DirecTV, Xbox, DVD via optical / coax digital. The topic is my Technics SL-1950...
  11. Subwoofers, Bass, and Transducers
    Hey guys, I have a Denon AVR-X1300W receiver. I'm using DefTech towers with two built in subwoofers on my main zone, so I don't need an additional subwoofer for the main zone (it's a small room). However, I've installed ceiling speakers on my two assignable channels to listen to music while I'm...
  12. Receivers, Amps, and Processors
    Hi, Quick question: Is it possible to get a pre-amp volume control that is not powered? My setup: I have some really decent active monitor speakers and I've decided to put them in my lounge and link them up to a Chromecast audio device, so that I can use them wirelessly. My problem: The...
  13. 2-Channel Audio
    Hi all, My amp upgrade research took me to the stage where I've Yamaha A-S2100, Arcam FMJ A39, Marantz PM-14 S1 SE, and Exposure integrated and pre-power combo lined up.. My speakers will be KEF R300. I like warm detailed musical amp. I'm more in to Vocal, acoustic, jazz, country and some...
  14. Receivers, Amps, and Processors
    The AVENTAGE advantage: designed to deliver the highest levels of audio performance through engineering Aluminum front panel with door, symmetrical amplifier layout, H-shaped cross frame, double-bottom chassis 9.2-channel with Dolby Atmos®, DTS:X™ and CINEMA DSP HD³ (7.1.2-ch or...
  15. Receivers, Amps, and Processors
    "OFFICIAL" 2017 Denon "S-Series" / "X-Series" AVR Owner's Thread + FAQ (Posts 1-8) 2017 Denon AVR models ---> S530BT/S730H/S930H/X1400H/X2400H/X3400H/X4400H/X6400H The Denon + Marantz Group (ie. D+M Group) USA has started to release information on the new 2017 Denon models starting with...
  16. Receivers, Amps, and Processors
    Hello all, new user and first post; please direct me or remove thread if not done correctly. I am in need of some advice/ guidance with my amp choice(s). I currently have two Martin Logan Motion 10's and a Marantz NR1605 in which I want to utilize as a pre-amp and integrate a 2 channel amp to...
  17. Receivers, Amps, and Processors
    My Denon AVR 3808CI stopped sounding due to a bad DMI card swapped by a repair shop. Since I am planning to buy a new AVR is there any new product in the market that can use my old Denon as a pre-amp or something, so I can have the sound and network connectivity coming from the new system, while...
  18. Receivers, Amps, and Processors
    Hi, I am looking to buy this amp just to use as a pre amp from phono level to line level to input into my surround sound system: Refer to image My question is, does anyone one know if using the Tape Out or Record Out would work for this? My plan is to input the record player into the phono...
  19. Speakers
    Hello Audio Expert Community - I need your advice! I'm part of a young speaker company looking to set up a showroom/demo room to showcase our incredible Dolby Atmos ready speaker systems. We've got the speaker part figured out but now we have to showcase to the public. I have a few Demo Room...
  20. 2-Channel Audio
    Hi all, I just picked up a niles SI-245 and wanted to hook it up to my existing system. Right now, I run all of my vinyl with a sansui QR-4500 and a little bear P5-1 tube-preamp. The sansui has preamp outs and a "main in" so you can route signal out and back from a preamp. In addition to...
1-20 of 21 Results
Top