AVS Forum banner
repair advice
1-20 of 28 Results
  1. Receivers, Amps, and Processors
    Hey folks, my PMA-2000R amp is not working anymore. So it has had some issues before where the input selector goes crazy while playing music, and it switches between all the inputs on its own until I turn the input selector. And then yesterday, the receiver won't output sound anymore. Before I...
  2. Subwoofers, Bass, and Transducers
    Hi, I've got MA RSW12 sub that is not working and curious if anyone dealt with the same issue perhaps and can guide me on how to repair it. I am not a pro electronics repair guy but very handy with a soldering iron and have some basic tools to test things and replace components. History: I...
  3. Receivers, Amps, and Processors
    Hello all, I purchased my new TX-NR1000 ~14 years ago and it worked very well for a number of years. A volume control delay issue was sort of repaired by an authorized dealer ~8 years ago but still there. Over the past ~2-3 years a number of issues have developed: Main-B outputs have stopped...
  4. Rear Projection Units
    Hello everyone, I used this site for reference before but this is my first post. I own 3 dlp TV 69c10.....first wanted bigger 73638.....was given free but wanted more features 73838....newest....ripped off I meet from OfferUp app and when I get there she reveals she doesn't have remote. She...
  5. Home Theater In A Box
    I have been struggling to try to fix my LG HT/Blu-ray device. The problem seems to have started after a lightning storm. Now, whenever the player is turned on, it goes through this loading process and then shuts itself down automatically right after finishing. The display on the device shows a...
  6. Receivers, Amps, and Processors
    I'm using an old Yamaha HTR-5560 with two powered speakers as a stereo pair connected to the main L & R pre-outs. When connected this way, the left channel is giving a distorted signal. I'm convinced this is the L pre-out itself and not a speaker or cable issue: I've troubleshooted this by...
  7. DIY Speakers and Subs
    Good Morning, I have an Inuke 6000 (no dsp, older version) that no longer powers up. The setup was 2 Inuke 6000 amplifiers that sat on top on one another with a 3/4" air gap between. The amps never saw more than 700w per channel, and even that wattage draw was rare. Both amps had the noctua fan...
  8. Digital Projectors - Under $3,000 USD MSRP
    Hi all, I've been having issues with my Benq w1070. It's 5 years old now, so probably time to get something new, but I thought i'd try my hand at some home repair. I think I may be in over my head. The initial problem was, what I thought, a color wheel issue. I took it apart to try and see what...
  9. Digital Projectors - Under $3,000 USD MSRP
    I have an Epson Home Cinema 3100 that has worked great for around 2 years now. The other day when I tried to turn it on an error appeared saying there is a problem with the auto iris and to contact my local Epson repair shop. I took the projector apart thinking the auto iris was mechanical and...
  10. Receivers, Amps, and Processors
    After owning a trouble-free 3311 for many years, I upgraded last May to an X3500H. I recently noticed that the X3500H's subwoofer (part of an Energy Take Classic 5.1 set) was not going into standby and that movies weren't packing quite the audio punch that they used to. To be honest, it could...
  11. Digital Projectors - Under $3,000 USD MSRP
    I bought a Aiptek T10 Pocket Cinema in Jan 2010. I subsequently sold it later that year but it was returned within a few days as faulty. It's a while back but it left my hands working and came back broken so somewhere in transportation it broke. I would like to get it working because I am now...
  12. Digital Projectors - Under $3,000 USD MSRP
    Hi everyone, I own a BenQ W1200 projector, sticker dated 2011 but I believe I bought it in 2013. It traveled around with me, from Singapore, to Europe, Chicago, and now back to Paris. The projector had stayed in its box for like 3 years (storage, and then I just didn't have the right living...
  13. DIY Speakers and Subs
    I bought a powered subwoofer as is. The sub worked, but the speaker terminals didn't. I took a look inside and the amplifier IC(TDA 7265) looks like it shattered somehow. Any ideas what could have caused this? Would it make sense to just replace it? Also this IC is rated at 25W+25W, there's...
  14. Digital Hi-End Projectors - $3,000+ USD MSRP
    My apologies if this is the wrong spot for this request. I have a used Christie LX500 we recently acquired and put in that is now behaving badly after about 30 hours of use. When I go to turn it on, the lamp lights up, I get the startup countdown on our screen 30, 29, 28 and then light cuts and...
  15. CD Players & Dedicated Music Transports
    Hello, I am in possession of a 1990's Samsung Home Stereo Unit (I have included a picture as an attachment). It has treated me very well over the years. However, there seems to be an issue with the 1/4 headphone port when using modern headsets. This is what I think the problem is, the TRRS...
  16. Digital Projectors - Under $3,000 USD MSRP
    Hey! So, not sure if I'm posting this in the right section, but I picked up an Epson HC2045 for a killer deal off of Craigslist. Upon setting it up, I noticed the center of the image has a green hue/bleed of color. High contrast scenes, like the red Netflix logo on a white background, looks...
  17. LCD Flat Panel Displays
    Hi guys, whilst moving houses something has fallen onto the screen of my TV and damaged it. I've uploaded photos, just wondering if its something that's easily fixed or if its cheaper to buy a new TV? I've replaced laptop screens before, so if it doesn't cost much / is relatively easy to...
  18. 2-Channel Audio
    Hello Has anybody had issues with the Coaxial 1 digital input in the HK 990? Mine was working fine before the holidays and today when I tried to listen to music it just didn't work. The Coaxial 2 works fine and also the Optical. I already reset the system but the Coax 1 is still not working. Any...
  19. LCD Flat Panel Displays
    Hello I recently moved and during the process my 50' Panasonic E60 was dropped on its bottom right corner. It only fell seven inches or so onto carpeted floor, but the screen was substantially damaged. Half of the screen is now dim (assuming a LED backlight issue), there are bright vertical...
  20. 2-Channel Audio
    Hello I'm looking for some help about opening the HK 990. Yesterday I cleaned the unit and the hole for the headphone jack got loose. I don't know if putting the unit sideways did it but in any case it got loose. Has anyone opened the unit? Maybe to clean it? From the pictures I've seen in...
1-20 of 28 Results
Top