AVS Forum banner
russound
1-20 of 34 Results
  1. Home A/V Distribution
    I have a Russound CAV 6.6 system w/ VM1 Video Matrix, been working fine, passing component video on a video distribution system. Could use some help troubleshooting. Today, the red light on the VM1 started to flash, with an accompanying click on each flash - it sounds like an internal relay is...
  2. Home A/V Distribution
    I just needed to spend more time with the manual. My new/old house has a solid working system with Russound CAM 6.6 which has a built in Tuner. All my keypads are UNO-S1's Somehow I messed up the built in radio tuner in programming mode and now Source 1 ( the default for the tuner ) does not...
  3. Receivers, Amps, and Processors
    Looking for some assistance with a sound system I just purchased. I have some prior experience with setting up my parents sound system (full Atmos capable Klipsch speakers paired with a Marantz SR8012), they have money I do not yet. But either way I picked up 4 Mirage FRx-5s, 1 FRx-S12 sub, a...
  4. Outdoor Theaters
    I am adding a projector to my pool deck. I have already invested a lot of money in four speakers for my pool deck. I am trying to utilize them. It kind of works, but I have a serious sound level issue. I have attached the complicated diagram. I am tapping the sound from my receiver, then...
  5. Home Automation
    Hi all, I really need some help and advice please if anyone can? I have a Russound ACA-E5 and 2x TSV-E5 touch screen panels that work fine... However the only thing I cannot get to work are the ‘widgets’ when I select home configuration button the screen is blank! I have a blue splash...
  6. Home A/V Distribution
    All the screens on my keypads (CAV 6.6) around the house are blank and the keypads are un-responsive. Has anybody seen this before? If you have, how did you sort it out. Many Thanks
  7. Receivers, Amps, and Processors
    Setup: Russound A-H484 Multi-Source Multi-Zone Hub. SONOS AMP Collection of in wall speakers in the room directly connected. Works fine. I would like to connect the Sonos as a ‘source’ to the Russound hub as to leverage the 2 external rooms via their CAT-5 runs and their own separate amps...
  8. Accessories
    2 x MCA-88 rack ears (2 pairs) 4 x XTSPlus mounting plates 1 x XSource mounting kit 1 x ST1 Smart Tuner mounting kit
  9. Receivers, Amps, and Processors
    I just wanted to buy a couple more Chromecast Audio and learned that earlier this year Google stopped offering them :(:(:( Anyways, here is my setup. I have 7 rooms with ceiling speakers. They are connected to a 16 channel Russound amplifier. 5 of the 7 rooms have a Chromecast Audio (and I...
  10. Home A/V Distribution
    Hi Everyone, I’ve read many of your posts over the years and learnt a lot during the process – so big thx to all you. I’ve recently finished building a house., (multi-year project and depleted more costs than anticipated or I could have ever imagined) living in it for 1 year (love it) and...
  11. Home A/V Distribution
    Hello AVS Community! I have received incredible advice via AVSForum in the past. Hoping the community can help me now with something pretty specific? Share your wisdom. :) Background: I recently moved into a house that was already wired for 6 zones with 6 wall pads...but no amp in the AV...
  12. Home A/V Distribution
    Hi all, We moved into our current house a few years ago which previously had a whole house audio system installed that we have yet to utilize. They left a Russound PRO-8 speaker selector and each room has a standard rotary knob to control volume. After further investigation I was disappointed...
  13. Home A/V Distribution
    Hi All, I have a Russound CAM6.6X Multi-Channel Amplifier and the left channel for zones 1-3 appear to have died. I've contacted Russound, and they are no longer offering factory service for these. They told me to buy a new unit. However, I have noted that there are still CAM6.6 units readily...
  14. 2-Channel Audio
    Hello Guys, My house is equipped with a ABUS Russound system, which distributes sound in the ceiling speakers around the house. The sound distribution starts from the Russound system that is installed in the basement, so I have attached a chrome cast audio to cast music around the house from my...
  15. Home A/V Distribution
    Not sure if I should be posting this here or on the Remote section, but I will start here. This year I installed a Russound MCA-C5 along with MDK-C6 Keypads. All seems to work fine (although the DMS-3.1 has odd problems). For the first time I decided to use the Russound Universal Remote that...
  16. Audio Theory, Setup, and Chat
    Hey All, can someone help me with finding the right equipent fro what i want to do. i have just purchased a Russound 6 channel music distribution system. i have run all the cat 5 and the speaker cables throught the house and back to the unit. out od the 6 channels, one of them is for the master...
  17. Home A/V Distribution
    H, I have just bought a Russound AC660 kit (A-C68 controller and 6 x A-K6L Keypads) and need some advice on wiring. The manual states that I should use T-568A wiring standard, but everything else I have installed within the home is already T-568B. As the keypads have RJ45's on them is there...
  18. Home A/V Distribution
    I recently purchased a MCA-C3 system with the MDK-C5 keypads off ebay. I was successful in getting it set up and programmed. Rather easy to do I might say. My question is whether it's possible to have one keypad controlling two different zones. I don't see an option to set it up that way and...
  19. Home A/V Distribution
    Hi everybody. I stumbled across this forum after doing a ton of research on which whole home audio solution I wanted to install and I just wanted to post my design in case others are interested and can learn from my successes and failures. So, to give you a simple system requirements overview...
  20. Home A/V Distribution
    So here is the question. I am wiring a new build house. I don't particularly want wall units in every room. Not really fitting with my look and proably will be confusing for some of the users. So if I get a unit like a Russound Cav 6.6 and something like the PCD FDE1, can I just control...
1-20 of 34 Results
Top