AVS Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Rear Projection Units
    Some one gave me a E50A10 this weekend. The screen was very dim and picture was set to "vivid". I don't have a remote so I can't check the hours on the bulb. I noticed a little bit of yellow glow near the center when the images is on something solid blue. I assume the blue polarizer might have...
  2. Direct View (single tube) CRT Displays
    I have tried unplugging it, turning it on, and off. Would there happen to be a reset button somewhere on this TV to bring it back to factory setting ? It is stuck on standby power, and the green light is just steady on, no blinking....no, sound, blue screen, will not switch channels by remote...
  3. Rear Projection Units
    I have a Sony Rear Projection, model KDF-E50A10 that I tried to replace the bulb on. I did my first bulb replacement on it about three years ago and it went smooth. This time when I replaced it, the TV didn't come on right away and after turning it on and off a couple of times it worked. After...
  4. Rear Projection Units
    Hi fellow owners, I need your help: I had a faulty optical block that I took out and got fixed and NOW, I'm trying to put it back together. However, when i took out the optical block, I forgot to document and take pictures of the entire process (yes, i know, i'm a freak'n idiot). I actually...
  5. Rear Projection Units
    Just replaced my lamp after 5 years, but the power light just blinks red 3 times when I turn it on. Everything I read says I should reset the lamp timer but I don't know how to do it. Googling it just brought up a bunch of pages where the solution had been removed. Thanks in advance.
  6. Rear Projection Units
    I bought a Sony model KDF - E50A10, SN - 8155828 in 2005 after a few years of service and the warranty had expired I noticed that the picture was staring to become blue / bluish all the time. Inquired with some other people who have the same unit and they also have the problem and reported it...
1-6 of 6 Results