Search Results for ‘speaker selector’

I need a 6-zone speaker selector for a 70v speaker system. However, I am only able to finder speaker selectors for 8ohm speakers. They do not list compatibility for 70v speakers and amplifiers. Would it be safe to use an 8ohm speaker selector like the Pyle PSPVC6? Or am I stuck getting a new...

Current setup is a Denon AVR-2113CI, a Russound SDB-6.1 speaker selector, a 5.1 setup of Klipsch speakers, and six pairs of in-ceiling Klipsch speakers spread throughout the house. Zone 1 of the Denon is used for the 5.1 setup, and zone 2 is used for the in-ceiling speakers. Zone 2 is wired...

After I made all connections to my speaker selector I’m only hearing the left ch when all zones are active. When I select only one zone both right and left ch are working. What could be the problem?

I realize volume controls are not ideal, but here is my question. I have a Denon AVR-X3200W amp and zone 2 is connected to a speaker selector (Niles SSVC-4) that has 3 sets of speakers connected to it. I am switching out a volume control and have a Niles VSD100K that is going to connect to...

Hello, this is my first time to the forum. I was hoping somebody had some ideas on how to achieve my home audio setup. Currently there are 3 set of speakers (each in a different room) where the wiring comes out a single wall. I noticed there were things like the monoprice 4 channel speaker...

Hi all, We moved into our current house a few years ago which previously had a whole house audio system installed that we have yet to utilize. They left a Russound PRO-8 speaker selector and each room has a standard rotary knob to control volume. After further investigation I was disappointed...

Hi all, Do speaker selector boxes exist that allow you to control the volume of each speaker set with a phone or tablet? Thanks! ndem

I've recently been gifted two Bose Acoustimass 6 speaker systems and want to be able to deliver audio to two zones using one receiver. This wouldn't have been my ideal choice given how the Acoustimass forces you to feed the speakers directly through the subwoofer / "acoustimass module". One...

Hi, I have built-in speakers in my home for two rooms. (2pairs in room#1, another pair in room#2), the input wires for all of them are in room#1. I'm thinking of buying a audio system (PYLE PTTCSM70BT) and connecting it with a speaker selector switch ("4 Zone Stereo Speaker Selector Switch...

This might be answered somewhere but i have found very little on it. My dilemma: I have only one input my HTPC. I am not an audiophile and am just trying to serve music to multiple zones with app controlled volume control. My home is not large and i have cheap pyle flush mount ceiling...

Will this work? Surround sound stereo (Panasonic SC-HT70) with all speakers hooked up, but front left and right going into a speaker selector in order to use the stereo to play music on the ceiling speakers throughout the house. There are individual volume controls in each room that has...

I have 7 separate zones (2 speakers in each zone) to which I want to distribute 1 audio source. I recently added the 7th zone. Up until now, I have powered my system via a Sony STR-985 receiver, with 14 gauge speaker wire running to a Pyle un-amplified 6 zone speaker selector, which...

Hello all! I need help in choosing the right speakers selector! Please :) I have a VSX-1020 Pioneer 2 zone receiver. My first zone is connected to a 5.1 Bose System for my living room. However I also have 12 x Polk T60I that are installed and wired in various rooms in my house. I really don't...

Hello, I have searched far and wide, read about parallel-series configuration, ohms, impedance matching, wire gauges, and now have 20+ other peoples home audio distribution plans embedded in my mind. However, I have not found an answer to my unique setup question. I recently purchased a house...

Hey everyone! So I'm looking to put together a pretty basic and admittedly unsophisticated multi-room sound solution for my house. I'll start off by saying I know there are much better ways to do this and this is far from an audiophile solution but hopefully I can get some constructive advice...

I think I have this right but as a new guy I wanted to get some confirmation:) I am trying to keep this as a "starter" system and keep the budget low, so wireless seems to be out of the question I have a 7.1 receiver that has a powered zone 2. My goal is to have surround sound in my family...

hi all, I am currently starting my dedicated Home theater room, The room will have 2x B&W 685 S2's as front B&W HTM61 S2 as center 4x B&W M1's that i already owned as surround & rear. sub/LFE: not decided yet. Now my question is: What Ceiling speakers would you recommend to complete this and...

I currently have a denon 2112 Ci receiver powering a 5.1 home theater and with zone 2 used for 2 outdoor patio speakers (on separate in wall volume control switch). Typically I use either the 5.1 home theater alone with zone 2 off or at times I play music over the 5.1 and zone 2 simultaneously...

Can anyone help me with my Roomie Remote app controlling my Aton DLA4 speaker selector? I have been on the phone with Aton and sent messages to Roomie with no luck at either end. Aton claims if I connect directly into the ir and ground on the rear of the Aton directly from a port on my Global...

Hello everyone, Im new to this forum and this is my first time posting. I have been lurking for a while and learned a lot of great stuff. My situation is that I recently moved into a house that’s pre-wired for several zones. I have my living room (5.1) bathroom, bedroom, and patio. I have used...