AVS Forum banner
trigger
1-11 of 11 Results
  1. Receivers, Amps, and Processors
    Hello (again), My JBL SDP-3 died after (too?) many years of service, care ... and repairs. I replaced it with a SDP-25. I easily plugged back my SDEC-1000A controller to the SDP, except ... the trigger. Indeed, format of the trigger is now different: two 12V jacks on SDP-25; vs. one DIN jack...
  2. Receivers, Amps, and Processors
    Hello- I'd like to power on my Parasound Hint 6 automatically. Unfortunately, it appears they removed the Turn On options from the original Hint design, and AC or 12v Trigger In are no longer available. (There's only a 12v Trigger Out on the Hint 6.) And when the Hint 6 is turned off or...
  3. Receivers, Amps, and Processors
    On my Denon AVR X4000 there are 2 12v output trigger ports. My desire to use them to trigger the turning on of a downstream amplifier that is used for zones 2 and 3. The Denon In-Command onscreen menu allows me to set which aspect of the AVR activates the trigger to send voltage. The problem is...
  4. Screens
    I have a Stewart screen with a Cima AboveCeiling motor. It came with an RJ25 female jack on on the screen motor and an RJ25 cable to a simple up/down/stop push button control board. I unplugged the RJ25 cable from the push-button controller and stripped the wires. I bought a 1/8" audio phono...
  5. Receivers, Amps, and Processors
    I just scored a McIntosh MC-7106 amplifier on Craigslist for a very fair price. I have it paired with an Onkyo SR-705 acting as the preamp. I'd like to "remote trigger" the MC-7106 somehow to power it on/off. I'd like to use the AC plug on the back of the SR-705 to power a 5V trigger for the...
  6. Receivers, Amps, and Processors
    I am trying to get the Trigger Out from my Denon AVRX4200W to control the power on an AudioSource AMP210, but I'm not able to get it to work. I've set the Denon to have Trigger 1 linked to Zone 2. When I toggle the power on Zone 2 with the AMP210 connected to Trigger 1, the the AMP210 never...
  7. Theater Room Items & Accessories
    My Elite CineTension screen can be triggered by a projector with a 12v output but my Epson projector doesn't have one. The screen is too old to use Elite's wireless screen trigger that's only good for 2.0 versions (mine is v 1.2). I would still like to find a way to trigger both the projector...
  8. Receivers, Amps, and Processors
    I have recently replaced my main reciever with a Denon X4200W. This caused my older Onkyo TX-SR508 delegated to my bedroom to hook up with my computer. I would like to have a setup where the Onkyo comes out of standby when my computer is powered on and goes back into standby when it turn off the...
  9. Receivers, Amps, and Processors
    I have a Sonos Connect that I am using as source for music in backyard. I have multiple amps that power the outdoor speakers which are all plugged into a Rack-Mounted Panamax Max 5300. The problem is that I have no way to turn on the Panamax which in turn powers the amps from the Sonos App...
  10. Receivers, Amps, and Processors
    I have two line-level devices that have variable volume control I would like to connect to an amplifier. That amplifier has one input and is always on (a professional Crown CDi1000). I am looking for an automatic switch that can choose the device that has voltage coming through the RCA inputs...
  11. Home Automation
    Hi guys, just wanted to check if there's anyone out there with some expertise that has any idea what i can do. I have a benq w1070 projector which features a 12V trigger out, unfortunately my screen (which operates via RF remote, or a control module connected to it directly) has no trigger in...
1-11 of 11 Results
Top