Hi All, I have a recurring intermittent problem whose frequency is increasing. About half the time when I power on my processor, it's video output doesn't display. It occurs in the simples setup described below. Integra DHC-9.9 -> HDMI cable -> Pioneer PDP-6020FD Power cycling the...

So I got a CLD-S260 recently to replace my LDV-2200 that had a shattered gear for the disc tray. I got it in and it seems to mostly be in good shape, but every disc I've played gives me this aggressive green streaks. In terms of what I've done so far I've tried: - Cleaning the laser and lens...

I bought a used Denon 2112CI and connected it to a 2018 Hisense Roku TV, a DirecTV DVR and a Sony 4K BR player. I’ve had it running a week and updated the firmware after connecting to the internet. At first, the video output from the DVR and the receiver itself was normal, but now I get...

Hello, I'm new to the forum. I just picked up a Sony KV-32FS120. It appeared fine when I picked it up but after transporting it home I noticed some issues. I did some research and I'm having trouble figuring out the solution. First, the image was tilted. I fixed this using the menu. I will later...

Good morning. I have an Onkyo TX-NR777 receiver. I had been using an LG 3D television for years, but went up to the new Vizio OLED. I also have an Apple TV that I use for most streaming apps. At first, devices were handshaking and running things correctly (huge pains trying to get everything...

I'm not sure what's the deal, I have tried everything to install the firmware update. I even made sure to follow the directions and confirmed that the USB mode is connected in mass storage mode. I saw someone here who had the issue back in 2015 which is what made me ask again to see if anyone...

This thread is only for LG OLED TV models CX and GX. The thread dedicated to gaming with 2020 CX and GX models is here. Do you have problems with your panel uniformity, banding, or vignetting? The dedicated thread is here. The E series was not refreshed in 2020. The WX (Wallpaper), ZX...

Hi everyone, I own a BenQ W1200 projector, sticker dated 2011 but I believe I bought it in 2013. It traveled around with me, from Singapore, to Europe, Chicago, and now back to Paris. The projector had stayed in its box for like 3 years (storage, and then I just didn't have the right living...

I have owned a Denon AVR-4800 for over 10 years, and it has served me well. I am totally underutilizing it as I really only use it as a stereo amplifier to listen to music. I have never had any problems with it until recently when it has started to exhibit some strange behavior: 1. Problems...

"OFFICIAL" 2019 LG C9 Consolidated Info, FAQ, Troubleshooting, Firmware & more General Info & Summary - UNDER CONSTRUCTION! This is not a replacement or clone for the 2019 C9–E9 Owner's Thread (No Price Talk)! That thread (and others) is the main source of this consolidation thread. Other...

Hi, I recently bought the aforementioned subwoofer. The specs on the built in amp are rated at 200w continuous and 400w peak. I plugged the sub into a Kill A Watt meter to determine the power consumption, and used a continuous test tone to gauge the wattage being pulled from the wall. Using a...

Trying to get into the service menu for this, none of the steps listed here have worked: https://factory-reset.com/wiki/Optoma_Service_Menu If anyone can help me get into this thing it would be much appreciated, thank you! fwiw, do not have the remote control, so if the steps on that page need...

I need help solving the following issue... I have the Creative GigaWorks T40 Series II speakers, and for the last 2 years I've had constant static/crackling sounds coming out of my left (secondary) speaker when powered on. This is regardless of whether or not I have anything plugged into these...

I have a Pioneer AVH-2330NEX in my car and it refuses to connect to Pandora over Bluetooth. It used to work, and was kind of flakey at times, but now it just refuses to connect. I believe it is an issue specifically with that app or with the Pandora source on the head unit because it will play...

I have a JVC R-X40 super-a receiver with 2 floor standing speakers plugged into it. Recently, I noticed that the left speaker all of the sudden got quieter than the right. I swapped the speakers to see if it was the speaker or not, it wasn't. So I plugged them into the room b attachments, it...

I am installing in-wall speakers for a projector setup. The speakers will end up behind the projector screen so won't be seen. Installed the left and right channels no problem, but when it came to the center channel I realized there is a stud right in the middle of it. The red line in the image...

Greetings! First off, if this post is in the wrong place, please let me know. I was hoping to solicit advice/feedback about what to do with my TV, it's a 2015 Samsung 60" J620D (from Costco...I think it's the same as a J6200?) and I'm having problems. When I use the TV's native applications...

Hello Has anybody had issues with the Coaxial 1 digital input in the HK 990? Mine was working fine before the holidays and today when I tried to listen to music it just didn't work. The Coaxial 2 works fine and also the Optical. I already reset the system but the Coax 1 is still not working. Any...

We have had an Epson 3020 for about four years with no problems. I went downstairs to check on the kids yesterday and noticed a pixel pattern on the screen (see attached pictures). I'm told it just started up a few days ago. I've tried different inputs and the pattern remains. I'm not sure what...

Hi there, everyone, I've heard a lot of good about this place, so I thought you guys might be able to help me with this issue. The JPG shows what you get when the projector is on; the dot-things also unfocus when you mess with the focus on the lens. Apologies for the bad quality picture and...