AVS Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. DIY Speakers and Subs
    Help needed I have just set up my new subs, each one is housed in a custom 700mm wide, 600mm high, 700mm deep box, originally it sounded great then once I applied some filters from REW it messed up it is no longer acting like a sub but a speaker. I have since removed the filters hoping it would...
  2. DIY Speakers and Subs
    Hello, I've been reading here for almost a year but this is my first post. About a year ago, I had a cheap Best Buy HTIB system when I decided to buy some real equipment for my under construction basement. The subwoofer I selected was the Monolith 15, and in my 3000 ft^3 upstairs room, I was...
  3. DIY Speakers and Subs
    OK. Everyone has an opinion so let's get some suggestions. I recently purchased a Behringer NX6000 (non dsp because I have a MiniDSP) to match 2x UM18-22 in Denovo 4cu ft. boxes. It turned out to be DOA. It's getting returned and I am considering other options. I am also still considering...
  4. Audio Gear
    Still building my theater and have already upgraded the UM18's to Lavoce 21 inchers. They are in mint condition and have less than 30 hours on them. Will drive 3 hours or so to meet you half way if you buy all 4. I'm in southern Indiana about 4 1/2 hours to Chicago 2 1/2 hours to Nashville 3...
  5. DIY Speakers and Subs
    [PLAIN]2x sealed Dayton Ultimax UM18-22 build thread Now the Dayton build pictures. Scroll past these to see the measurements (yes, the amp arrived!) [B]Measurements Left sub only - no EQ (followed by group delay) Right sub only - no EQ (followed...
  6. DIY Speakers and Subs
    This thread will detail the build of the two subs that are going behind my screen wall. This will be more of a discussion type thread than a how-to. I'm not going to show how to connect two panels together...it's not a tutorial. Driver is the Dayton Ultimax-18 aka UM-18. Material is 3/4" MDF...
  7. DIY Speakers and Subs
    Hey all, I have been modeling this sub based on some serious inspiration from the Marty-Sub, my personal sub exterior preferences, and some numbers from the parts-express UM18-22 product page. Specifically this "Vented (infra-sub): 12 cubic ft. (net internal, not including driver or vent) tuned...
  8. DIY Speakers and Subs
    So @berstuck was looking for a build for his theater with a budget of $2000. I put this together, which should absolutely pound, consisting of two of these enclosures and two iNuke 6000's. The enclosure is designed to take 2x UM18-22 and is tuned to 16hz. Box volume excluding port and...
1-8 of 8 Results
Top