AVS Forum banner
universal remote control msc 400 msc 400 master system controller
1-11 of 11 Results
  1. Remote Control Area
    I have a mx900 and a mx3000 I bought from Tweeter when they went under and have never got to use them as I found the needed software WASN"T included:rolleyes: so they just got put back in the "I'll get back to that pile" My harmony finaly gave out so now I'm back trying to put these in use. Do...
  2. Remote Control Area
    I have a setup with two viewing areas and all sources and HDMI switching, etc in a centralized closet. The matrix switcher I'm using is a Gefen GTB-MHDMI1.3-442 4x2 matrix. I am using Xantech DL85 receivers wired in parallel back to a Xantech 789-44 connecting block in the central closet with...
  3. Remote Control Area
    Hi All Have WMC working great with URC (MX-780 and MSC-400). I'm thinking of switching to JRiver, anyone know if the WMC IR codes will work with JRIver (using same remote and UIRT, so the physical side will obviously work, but will skip on WMC do skip on JRiver, or do I have reprogram...
  4. Accessories
    Universal Remote products offer main custom home automation products. Here for sale is their master control unit sold as is-- doesn't have documentation/packaging/power cord, it was salvaged from a previous installation. Unit sold for over $500 when new, yours here for $150 w/shipping! Here...
  5. Home A/V Distribution
    Hi Guys Tired of Harmonies, their long tx range and no way to tell if device is on. Got a great deal on new URC MSC-400, but need software. Any ideas where I can get it? Regards Mark
  6. Remote Control Area
    Hey all, I've got an MSC-400 set up and working great for my Denon AVR, Uverse, and HTPC all through IR. The Denon is directly connected to the MSC-400 and the Uverse and HTPC are controlled by IR blasters. I am having no such luck with my new pj - the Sony VPL-HW30ES. The CCP has IR codes...
  7. Remote Control Area
    Looking for more help than I'm getting from the fine folks over at URC support... I picked up a MSC-400 with an MX-980 a few weeks ago and it's been a great system for controlling my home theater gear which is stashed in my basement. I recently was hooking up my new Denon AVR-3212CI and ran...
  8. Remote Control Area
    title pretty much says it all... i need to extend an rs-232 cable to get it to my projector.... anyone done it? how'd you get the "best" results? tia.
  9. Remote Control Area
    When I was searching for a solution on how to incorporate my PS3 in with my MSC400 setup I couldn't find anything so I thought I would post my solution here in case someone can find it useful. I didn't want to buy an IR to bluetooth adapter just to be able to turn my PS3 on with my URC system...
  10. Remote Control Area
    I just setup a MSC-400 which replaced a MRF-350. The MRF-350 was outside my rack closet but the MSC-400 is located in the rack. The remote being used is MX-900. MSC-400 is programmed. When power is plugged into MSC-400 I get hiss from all speakers, system is on. Unit is plugged into a...
  11. Remote Control Area
    Need help to connect the MSC400 to windows xp mode running on a machine which has windows 7 Ultimate 64bit. I just don't seem to be able to connect & upgrade the software on the MSC400. Any help would be appreciated
1-11 of 11 Results
Top