AVS Forum banner
universal remote mrf 260
1-18 of 18 Results
  1. Receivers, Amps, and Processors
    Help! After a recent firmware update the Denon X4000 is not working properly at my mother-in-laws house 1500 miles away. Her components include a recent vintage Panasonic Plasma TV, Time Warner HD Cable Box, Denon AVR-X4000, and MX-850 Remote with MRF-260. All connected with HDMI cables. Before...
  2. Remote Control Area
    I'm trying to connect a Darbee to a URC MRF-260, controlled by a MX-880. Plugging a cable directly into the IR in port doesnt work. I emailed Darbee for help and got the following answer: "The IR IN on the Darblet expects a pin-out, from tip to sleeve of: (3.3V VCC Out, 3.3V IR In, GND). If...
  3. Remote Control Area
    edit: blu ray is LG BP620C. sorry about that. Hi all, I have the above remote/blaster combo and it controls my denon receiver and directv box via RF. I am able to control the blu ray player with IR but as soon as i leave the closet i lose the ability to control it. i have the remote set to...
  4. Remote Control Area
     I have 2 Motorola cable boxes and 1 Pace cable box  in my Media room attached to 3 TV's - .all the TV's are different brands. All the units are on one wide wall furniture unit and face the same direction in a 15'X20' area. I need to have all 3 operating at the same time and be able to...
  5. Remote Control Area
    Hi All Novice here. Wish to be able to control my AVR that lives inside, from two different locations outside via the IR remote. Happy to run cable. Was thinking of a repeater on the opposite wall facing the AVR, I can fit the power source in the wall cavity. Cable runs would be 5-10 metres...
  6. Remote Control Area
    Hi! Has anyone compared this Harmony Ultimate to URC MX-780 OR MX-980 with MRF-260 ? I was planning to go with MX-780 ( as it was advised by Magnolia @ Best Buy), but when I read about Harmony Ultimate, thought that could work too. Please give me your thoughts on both the remotes and how...
  7. Accessories
    For sale is a used MX-780 remote control and a MRF-260 RF/IR base station. Both are in nice condition and work perfectly. I will include a copy of the CCP programming software. MX-780: $110 OBO MRF-260: $50 OBO Combo: $150 OBO Feel free to shoot me a reasonable offer. Shipping Extra...
  8. Remote Control Area
    I have a mx900 and a mx3000 I bought from Tweeter when they went under and have never got to use them as I found the needed software WASN"T included:rolleyes: so they just got put back in the "I'll get back to that pile" My harmony finaly gave out so now I'm back trying to put these in use. Do...
  9. Remote Control Area
    Hi.... I have my equipment in a Salamander Designs cabinet with perforated steel in the doors. I use a URC MX900 remote. I am using an IR Hub (Wired Home WHIRH) with a Wired Home low profile target, and a few IR emitters. With my Samsung DVR (Time Warner) - I frequently get double...
  10. Remote Control Area
    I do 90%+ of my shopping through Amazon prime, but was supremely disappointed this morning to find that the only IR emitters available were in the neighborhood of $10 a piece. Any suggestions? These just don't seem like the type of components that should be costing $10 let alone $5 each...
  11. Remote Control Area
    This seems like it should be easy, but I've struggled with it for awhile. I have two sets of MX-850 remotes + MRF-260 RF base stations which are used to control two different sets of AVR+STB. All equipment sits in the same closet, and occasionally I have a problem where MX-850 #1 interacts with...
  12. Remote Control Area
    I am researching RF remote options (MX-450 specifically) and hoping someone more knowledgeable can answer a few specific questions for me. I will have all of my source equipment tucked away in a closet with a TV in the main viewing area. I am trying to understand whether I can do one or the...
  13. Remote Control Area
    I have the MX-650 and the MRF-260 base station. The RF module in the 650 decided it no longer wanted to work. I could shake the remote and here something was loose inside. URC states the whole remote needs replacing and there is no fix for the RF module. Im looking into the MX-450 for a...
  14. Accessories
    Great little RF controller if looking for something inexpensive. Asking price includes shipping.designed for use with select Universal-brand remotes controls up to 4 components 2 fixed IR outputs for IR flashers 2 variable IR outputs for direct connection to component rear-panel IR imputs...
  15. Remote Control Area
    I'm about tot pull the trigger on a URC-780 with the MRF-260 base station. I already have an older R20 with a RFS-200 RF base station upstairs in the bedroom and the mrf-260 will be in the family room. Is there any way to avoid cross talk between the two? Ie, won't the RFS-200 upstairs pick...
  16. Remote Control Area
    Just learning iRule and the iTach IP2IR so go easy on me if this is a noob question here...I've searched and can't find a match. For some reason I've not been able to get my ATON DLA6 speaker selector to accept controls from iRule via IP2IR. To physically connect the IP2IR to the ATON device...
  17. Remote Control Area
    Hello, I have my components in a nearby closet - I recently picked my new DVR from Comcast and it is the RNG200N. I have a Universal remote MX-450 and a MRF-260 station with emitters. No matter where I put the emitter, I cannot get the DVR to respond to the commands. So, I picked up a 3.5mm...
  18. Remote Control Area
    I just tried to set up a new mrf-260 with my mx-900 remote. I think I have it set up correctly in the remote, the computer program editor, and the mrf-260, but only the #4 flasher works. Whatever component is connected to the flasher out of the #4 port works, but the components connected to...
1-18 of 18 Results
Top