wiring

I’m new in this, and I’m trying to understand how ohms woks. I’m designing a bluetooth speaker, but would like to wire to a 2x15w class D audio amplifier to a 2 full range 15w 4ohm, 1 Subwoofer 15w 4ohm and 2 Twitters 4ohms with capacitors. How do I connect an odd number of speakers to this...

Okay so setting up a new system in a new house with a large tv mounted and a receiver below in a unit. I will run 2 HDMI cables, I will a coax and optical wire. There will be a cat 7 jack at both behind the tv and behind the reciever. There will be two sub wires run from the reciever to the two...

I have powered speakers for my L/R/C channels and I’m trying to troubleshoot options for concealing their respective cables. (One power and one XLR --> RCA.) I would like to wall mount my L & R speakers in about these positions (see red boxes): Questions: 1. I realize I can’t run a power...

I am trying to convert my existing media room(MR) to Atmos ready by adding 4 ceiling speakers. Not really a DIY guy, never did anything like this before, but after watching some YT videos, realized it's not that hard except the fishing wire through the attic part. That's where the challenge is...

Hey everyone, I'm pretty new to this hobby and not an expert at all. I've had a simple 5.1 set up before and decided to jump back in the game a few months ago. I have a x940e tv and decided I wanted to compliment the set with a decent surround sound, nothing top of the line or extravagant, just...

I have a multi-part question that I am sure someone can answer and it is driving me nuts. I am building my own F L & C speakers utilizing the Tang Band W8-2314 8" Coaxial Full-Range Woofer, using a 2.5khz x-over. This is a 4 ohm speaker only rated at 50w RMS and 100w max. I plan on building the...

I have a multi-part question that I am sure someone can answer and it is driving me nuts. I am building my own F L & C speakers utilizing the Tang Band W8-2314 8" Coaxial Full-Range Woofer, using a 2.5khz x-over. This is a 4 ohm speaker only rated at 50w RMS and 100w max. I plan on building...

I am going to be attempting to hook up and power 8 bass shakers rated at 50 RMS each and one Dayton Ultimax 18 rated at 1000 RM @ 4 ohms. I am hoping to power them with one amp if possible. The amp I have been looking at is the Rockville RPA14 which is rated at 1000 RMS X 2 at 4 ohms which...

hi folks, i see variations of this questions answered before but thought will ask afresh for recommendation on which powered sub will work out of gate to replace my sony hdz278 passive sub. this passive sub just started making a noise like something is loose inside. but when i gently shake it...

Hi guys, https://www.monoprice.com/product?p_id=10761 I'm sure you get tons of questions about this product, but I couldn't quite find what I'm looking for when I tried to search. I'm helping a brother wire up his new house and most of the zones are straight forward except for one. He wants...

i cant add the link but just google lennar low voltage and it should show up from CEPRO So even if you want to pay for it, its not even an option. They want add anymore. What a joke! My wife wants a very specific plan but this is a huge turn off. It's a 2 story home too and no basement so we...

Hi Folks -- Need your help! I am setting up a 2-channel listening room in a newly constructed space. We moved into a new house and added a room above a 2-car garage for my office and music listening room. I attached a drawing of the room. Because of the roof slope and dormers, the room has...

Hello! Just faced a bad problem! My PC's Nvidia 2080ti hdmi output, respective receiver hdmi input and receiver hdmi output along with the projector's hdmi input port and fans are not working! Dunno what happened, was using the system the previous day without any problems and the next day...

I've got basic knowledge when it comes to home stereos, so when I inherited 2 Diamond Wharfedale 8.1 Pro-Actives, I was kind of blown away. I looked at the inputs on the back (see photo), and I looked at my speaker wire, and I looked at my somewhat cheap Onkyo receiver, and couldn't make heads...

My current plan for my (relatively straightforward/simple) HT setup is to have one 4K/HDR/Atmos TV and speakers in the living room and the rest of the A/V equipment (AVR, cable box, PS3/4, Fire TV, Chromecast, etc) directly below hidden in the basement. This should be around 30-40 feet for runs...

I've got a large natatorium that had speakers installed in 2008. Apparently the speakers are not marine quality and have started to rust due to the chemicals and humidity in the air. There are approximately 10 speakers setup in a 70 volt system all powered by 4 - Crown CTS 2000 amplifiers. When...

Hi everyone, I just bought a pair of Pioneer SP-FS52 floor standing speakers, an Energy e:XL S8 subwoofer, and I have a Yamaha RX-V490 receiver (quite old). I'm not too sure how I would set this up. I found pictures of the back of each. I have speaker wire, banana plugs, RCA wire and RCA...

This thread covers the following 2018 Denon AVRs: S540BT/S640H/S740H/S940H/X1500H/X2500H/X3500H/X4500H/X6500H The Denon + Marantz Group (ie. D+M Group) USA has started to release information on the new 2018 Denon models starting with the four new "S" series models. The lower "X" series will be...

Hello All, In general, what I'd like to do is play music from my Amazon Echo dot on my home speaker system. The Echo dot has a 3.5 mm mini phono output. My home has a multi-room speaker system -- made in 1997 (M&S brand). When you remove the front panel on the speaker system, there is a...

Over the Christmas weekend I fell victim to my great friend in Magnolia, thus upgrading everything for my Home AV System with the following: - Sony 55" OLED XBR-55A1E - Marantz SR5012 Receiver - Martin Logan Motion 4i Speakers w/ 6i Center Channel - Martin Logan Dynamo Subwoofer Unbelievably...