AVS Forum banner
yamaha rx a1020 7 2 channel network aventage av receiver
1-20 of 40 Results
  1. Receivers, Amps, and Processors
     Hi,   I currently live in Texas and I have a Sharp TV that is capable of handling both NTSC and PAL signals. I am planning to buy a 7.2 AVR (HK or Yamaha). In near future I might have to relocate to EU or Asia where the standard signal for TV's is PAL.    I believe that the AVRs do not...
  2. Receivers, Amps, and Processors
    The trend seems to be that most new receivers have none or only a single S-Video port. I have many classic game consoles that only support S-Video as their highest form of output. For my den I picked up an Yamaha RX-V3900 two years back that works great with tons of S-Video ports that it passes...
  3. Receivers, Amps, and Processors
    I have a Yamaha Aventage A1020 --- manuall says I need 20cm clearance on sides and 30cm clearance on top. are these for real? I could practically park a Mini Cooper in that space. I was thinking more like 4" on each side and 6" on top / back. Was also contemplating drilling some holes in back...
  4. Receivers, Amps, and Processors
    Hello all, new to the forum and looking for a new receiver to power my Ascend Sierra 2's. Im torn between the Yamaha, the Marantz and the Emotiva. My buddy is a Denon/Marantz dealer so I can get a decent deal on the marantz sr5008, actually cheaper than the $699 that the Yamaha can be had for...
  5. Subwoofers, Bass, and Transducers
    I have: definitive technology: room size 35'x16' distance from couch to projector screen is 13 feet (theater room alone is 16x12) One side opens up to game room but, I only need to get a good sound in my theater room. No one gonna watch a movie from a game room bp 2002 towers clr 2500 center...
  6. Receivers, Amps, and Processors
    I have the following Panasonic GT60 tv Yamaha RX-A1020 receiver Suddenly i can't seem to get the two to connect. I have tried both outputs on the receiver and all the inputs on the tv, multiple HDMI cables. The odd thing is that i can connect my laptop to all the HDMI inputs on the tv...
  7. Receivers, Amps, and Processors
    Hi guys (and girls?). I've been lurking on here for the better part of a week or two reading reviews and amp recommendations and figured I better just make a post. My existing amp, Onkyo TX-sr674 is about 7 years old and finally bit the dust with the HDMI board going which now has me in the...
  8. Receivers, Amps, and Processors
     http://www.ebay.com/itm/Yamaha-Rx-A1020-7-2-Channel-Home-3D-Receiver-Rxa1020-Great-Bargain-/310646704162?pt=Receivers_Tuners&hash=item4853fc8822 Ive been recommended this receiver because I'm looking for a receiver that has pre amp outputs. However, its a b-stock or refurb. Is this a good...
  9. Receivers, Amps, and Processors
    Im stuck in between budget denon 1513 or a budget yamaha, is ypao better than audyssey? I am in not way speaker savvy, so I will be using either to theif full extent.
  10. Receivers, Amps, and Processors
    I purchased a Denon avr-2313ci and found out that I can not watch tv and play music at the same time if an HDMI cable is used from the cable box to the receiver. For me to have this work, I need to have the cable box run into the receiver with an analog connection. This isn't a problem but kind...
  11. Speakers
    Gents, I have already purchased: a Yamaha Aventgate RX-A1020 Receiver a HSU VTF-3 MK3 subwoofer and was thinking to go with a BIC Acoustech 7.0 system. 2 PL-89 II Towers 1 PL-28 II Center 2 PL-66 Rears 2 HT-64 Surrounds This is around ~$1,200 for the speakers (if anyone has a best...
  12. Receivers, Amps, and Processors
    I just picked up a pair of used Paradigm Studio 40 v3 speakers, and have a Rythmik 12" servo sealed sub woofer. I now need to purchase a receiver and have about a $750 budget. So far, I've narrowed it down to the Marantz SR6007, the Yamaha RX-A1020 or the Onkyo TX-NR818. I eventually would like...
  13. Receivers, Amps, and Processors
     Hi all!  My old Yamaha receiver has finally started showing it's age, so it's time to replace.  I've been looking at many receivers around $1000 or less and I am right now at a crossroad:  stick with Yamaha or move into a Denon AVR.   I am powering a Paradigm set up with Reference 7's up...
  14. Receivers, Amps, and Processors
     First, let me apologize in advance but, I'm new to this forum and you've probably heard this thousands of times.  I have been pouring over hundreds of threads, reviews, and articles looking for an upgrade to replace my Denon AVR-2105.  I've narrowed it down to two receivers.  The Denon 3313ci...
  15. Receivers, Amps, and Processors
    I have a RX-A1020 receiver. 7.1 speakers The front speakers are powered by an external power amplifier, so I have two unused amp channels in the receiver. From what I can interpret from the manual, the rear speakers will stop playing when i turn on zone2. Is this also the case when the...
  16. Receivers, Amps, and Processors
    Hey all, I'm upgrading my home theater and would like some advice on a preamp to replace my aged Rotel RSP-1068 that doesn't even know what HDMI is. Below is a quick list of my needs with a more in-depth explanation below the list. Here's what I'm looking for:$1,000 budget Must have minimum...
  17. Receivers, Amps, and Processors
    Hello, My father in law is in the market for a new receiver. He's hesitant about switching from his existing setup because he isn't AV/tech savvy and his entire house has speakers that are running off of his existing Yamaha receiver (I'm not sure how the current setup works exactly, nor is...
  18. Speakers
    I know there are threads on what speaker is best for rears and sides but I can't find anyone specifically calling out what to do with 2 rows. People are saying dipole works because it will bounce off walls but, what if you dont have a wall on one side of the room??? I am really struggling to...
  19. Receivers, Amps, and Processors
    I just got my hands on a slightly used - like brand new RX-A1020. I love all the features and simplified connectivity with this new receiver. My previous Yamaha RX-V1000 was about 13 years old and due for an upgrade. I have owned 2 Yamaha receivers over the past 20 years and absolutely love...
1-20 of 40 Results
Top