AVS Forum banner
yamaha rx v667 receiver
1-20 of 82 Results
  1. Receivers, Amps, and Processors
    Curious on your opinions. I currently have a Yamaha RXV-667 AVR that has been great for movies, but awful for music. I'd like to replace it with an AVR or Preamp that will give me crisp, clean, powerful 2 channel audio with a good soundstage. Basically I'm looking for the performance of a...
  2. Audio Theory, Setup, and Chat
    I have a 4 year old lg390 BR player that has recently been unable to play some rentals...in particular the center channel audio is totally cut out and my Yamaha 667 receiver shows only LR channels (rather than the 5.1 it is setup for). All connections are hdmi, and the center works under...
  3. HDMI Q&A - The One Connector World
     I upgraded my television from a 32 inch Sony KDX to a 40 inch Samsung 6300AF.  All I did was swap the tv's on the wall, and I hooked up the same HDMI cable into the new tv.   I'm switching all inputs through my Yamaha AV RX-V667 receiver with one HDMI out to the tv.  Now when I turn on the tv...
  4. Receivers, Amps, and Processors
    I am currently looking at used receivers for my setup. Currently I use Polk Monitor 60s CS2 40s for rear. This will change in the future once I have a bigger theater room. My current receiver is a Yamaha rxv667 but my dad wants a secondary receiver to use as a pre amp. Seeing if I bought used...
  5. Speakers
    OK...here is some info below about what I have and what I want to attach to it. Receiver Yamaha RXV667 90W, 7.2 (I am utilizing the 7.2) I currently have some average Cerwin Vega V-12F fronts and a Polk CS10 center. I am looking to replace these with something better. I love the Vega's for...
  6. Audio Theory, Setup, and Chat
     I'm a first time poster with limited av knowledge.  I have some questions about setting up a whole house audio system with existing wiring.     Here's what I have:  Yamaha rx-v667  Polk rc85i    In four rooms, 2 simple 2-wire cables run from their wall locations to a junction box.  Each...
  7. Audio Theory, Setup, and Chat
     Hello,    I've got some questions about connecting existing wiring into my receiver for whole house audio.     Here's what I have:    Yamaha rx-v667 receiver Polk rc85i in-wall speakers   The existing wiring in the room has 2 sets of simple 2-wire cable run from wall locations to a...
  8. Speakers
    Hello, I am moving from my apartment/condo where I currently own paradigm cinema speakers. I have 3 cinema 330s for center and fronts, 2 ADP v3 for surrounds, and Paradigm DSP 3100 sub. I have a Yamaha rx 667 receiver. I will be moving to a house with much more space. I mainly use the system...
  9. Speakers
    I currently have the the Polk Audio RM75 5 CH High Performance 5 Piece Surround System that came free with my YAMAHA RX-V667BL 7.2-Channel Receiver . I also have a Polk Audio PSW Series PSW10 Black 10-inch Powered Subwoofer . I was thinking of purchasing the Monitor70 along with a CS2...
  10. LCD Flat Panel Displays
    Hi, Recently purchase a KDL-65850a. I cannot get ARC to work. Below is what I have verified:ARC is enabled on Yamaha rx-v667 Amazon HDMI cable that supports ARC. (I verified that the cable supports ARC by plugging it into my Yamaha v867 in another room with a Panason vt30. I even tried the...
  11. 3D Tech Talk
    Hello, I just came across the VIP 3D line and am thinking of picking it up but debating between the theater for 200 and the plus for 400. The only difference I can find online between the two is that the Plus has 1080p output in 3d and that it is 7.1 (which shouldn't matter anyway since the...
  12. Receivers, Amps, and Processors
    I have always been a Yamaha person & never, until now, considered anything else. My local HT Dealer, who sells both, recommended I look at the Pioneer VSX-43 vs an equivalent Yamaha AVR I was considering. My main question is not so much the quality of the Pioneer, but rather one of wattage. My...
  13. Receivers, Amps, and Processors
    The HDMI Output on my Yamaha RX-V667 stopped working today. Yesterday everything was working. Today I plugged in some new speakers and went to turn on the receiver and nothing was being output via HDMI. I tested the cable going to the same tv but from another device and it worked fine. It's...
  14. Receivers, Amps, and Processors
    Hi all, I recently bought a wireless headphone set which was packed with a white/red tulp connection. I tried connecting it to my Yamaha RX-V667's audio out and zone2 output. But it's not picking up any sound. I looked into this problem and it seems to me these outputs can only be used for...
  15. Receivers, Amps, and Processors
    I'm having a problem and hope someone can help. I have a Westinghouse HDTV and Time Warner DVR cable box. I tried running hdmi from cable box to receiver then hdmi from receiver to TV but it's not getting a picture. Can anyone help me please. Thanks Jack
  16. Receivers, Amps, and Processors
    I must be confused. I have Time Warner DVR box. don't I just do hdmi out to receiver and then out from receiver to tv? It's not working so HELP Please... Thanks Jck
  17. Receivers, Amps, and Processors
    Hello, I would appreciate any advice in choosing between a new Onkyo HT-RC360 ($392 with tax, discontinued model) versus a used Yamaha HTR-6063 which I think is the same as the RX-V667 ($265 via Craigslist with iPod dock). I'm new to the AVR scene as I'm upgrading from a component stereo...
  18. Audio Gear
    Hi looking for a used Yamaha RX-V667 in good working condition can do $235 paypal shipped or cash pickup in NYC. Might be interested in a Yamaha RX-V 867 as well for a bit more. Please PM me with pics if you have one for sale. Thanks!
  19. Dedicated Theater Design & Construction
    Current state of my theater: ROOM: 17x16x10 ACOUSTICS: DIY acoustic panels Staggered (side walls) DIY acoustic panels (rear wall) VIDEO: Epson 5020UB (cinema mode) Seymour Center Stage XD 150" 2.35 scope screen acoustically transparent DirecTV HD DVR Popcornhour VTen Samsung Bluray player...
  20. Receivers, Amps, and Processors
    I am using my Yamaha RX-V667 to bi-amp my ADS L1290 speakers. These are large floor standing speakers that have a bi-amp switch and extra terminals for bi-amping. My question is: Which speaker terminals on the 667 (front or back) are high frequency and which are low frequency?
1-20 of 82 Results
Top