AVS Forum banner

yamaha

  1. Receivers, Amps, and Processors
    I am no audiophile. I'm replacing a pioneer vsx lx303 that took a lightning strike. Im running 5.1.2 with klipsch reference. I was set on the denon until the yamaha started popping up. I have a lg 65 cx and will have a ps5 for source audio/video. Thanks in advance for opinions and any possible...
  2. Receivers, Amps, and Processors
    Hi I have the following setup Apple 4K TV ----> Yamaha RX-A1070 -----(high quality HDMI cable)----> AV 4kHDR extender ----> Cat 6-----> AV 4kHDR extender -----> Sony XBR 900H When I plug the Apple TV 4K Directory to the extender, I can transmit 4K HDR Dolby Vision. When I go through the...
  3. Receivers, Amps, and Processors
    I had a pioneer vsx lsx303. Im thinking Denon 2700h but Im open to suggestions. I run a 5.1.2 configuration. I just got the lg 65 cx oled with some of the insurance dough at costco. I think I might arc to the receiver since the tvs processing is top tier.(good idea?). I will also use ps5 for BR...
  4. Receivers, Amps, and Processors
    I have narrowed it down to 3: Denon AVR-3313 Pioneer VSX 60 Yamaha RX-V673. What would be your choice and why? P.S. I went with the year 2012 based on my requirements.
  5. Receivers, Amps, and Processors
    I am interested in an AVR receiver that has the following capabilities: At least 4 HDMI 1.4 inputs (for Arc) At least one other zone output At least an Ethernet connection DSD over HDMI (for my Oppo DV980H and Sony BDP S6700) My Budget is $300 so of course I’m buying used. Also, something from...
  6. Receivers, Amps, and Processors
    (Solved) Yamaha Only receive PCM in MKV files after formating/fresh install windows I have a yamaha YHT 2910 receiver (HTR 3067) connected to the PC in a GTX 1070 Ti ... Everything was normal receiving Dolby and DTS on the front display until I format and update windows 10, now I only receive...
  7. Receivers, Amps, and Processors
    Yamaha V2092 + A3080 or RX-A8? Greetings, I am the original owner of a Yamaha V2092 receiver. I love it so much. It has served me well for two decades. But I'm finally upgrading my Home Theater and need some advice. I have two paths forward: 1- I buy the Yamaha A3080 9.2 (11 channel...
  8. Receivers, Amps, and Processors
    Hello, I am new to this forum and this is my first post. I was googling and found this forum with experts in Yamaha repairing. i would be thankful if someone could help to fix my receiver. When starting the self diagnostic mode it shows a dc_prt 255H message and shuts down after 5 secods. By...
  9. Receivers, Amps, and Processors
    Hey guys, ***first time poster*** I have never realized until I went to a hifi store that the screen section on the Yamaha receiver remote is suppose to be working (it has never worked for me). It lights up but no nothing shows ie zone, volume or input ect. I also owned a older Yamaha remote...
  10. Subwoofers, Bass, and Transducers
    I have a Yamaha R-N803D network receiver with wired speakers. The receiver is connected with the MusicCast app. I have also installed the Yamaha MusicCast SUB 100 in the network with the MusicCast app. I tried to connect the "amplifier room" to the "subwoofer room". However, the app says...
  11. Speakers
    I have a Yamaha receiver for music cast but I currently don’t have a way to have wires on the rear speakers. I will have to hang them kind of high on the wall and aim them down so I don’t walk into them in the middle of the night. I am not sure what all is a suitable option. I was hoping to keep...
  12. Speakers
    I'm a bit confused about the wired speakers available for the Yamaha RX-V685. The manufacturer website doesn't actually seem to recommend speakers. I'd like to have 3 front speakers, 2 rear and a bass speaker. Which Yamaha speakers would be good? I'd initially prefer wired speakers. Can...
  13. Speakers
    I have a Panasonic 5.1 bought it in 2007 SA-PT753. But I was not using the 5.1 because I disconnect my rear surround because it was conflicting with my Wifi since is an old system. Then I saw on sale a Sonos Beam and I bought it and disconnected my Panasonic. The problem with my old system is...
  14. 2-Channel Audio
    Hello, I have a Yamaha R-S202 stereo bluetooth receiver. Every time I turn it on, it says "MAIN ON" with the power relay click; it stays on for about 3 seconds, and then turns off with no warning like "OVERHEAT" or "PROTECTION". I can do this about 3 times and then it won't do anything until I...
  15. Speakers
    Hello everyone, I'm planning to build a dream home theater and want to know if the following sounds sufficient and future-proof (for a long while, anyway). Some details - the current 'workable' space measures approximately 12' x 13' with 8' ceiling. There is an area off the entry way that is...
  16. Receivers, Amps, and Processors
    Hey guys, I need your expertise! I bought AS 801 yesterday(I used to have Emotiva A-100). I found when I choose analog inputs, such as line 1, 2, 3, CD, etc, I turn the volume to 9 o'clock, if my ear is close to the speaker, there is humming from my speaker(KED q150) . However, if I switch to...
  17. Receivers, Amps, and Processors
    Hello, I am being recommended a 2000$ Yamaha RXA2080 or a ~3500$ Emotiva XMC-1 with XPA-7 amplifier. I have no intention of adding more speakers to my current 7.2 system home theatre. I have Monitor Audio Silver 500's for L/R, a C350 for centre, Silver FX for side surrounds and C-265 FX for...
  18. Home A/V Distribution
    Iphone 8 to Yamaha RX-A700. Can I use JUST an Iphone connection to HDMI cable to receive audio and video for the TV? My goal to to watch and listen to facebook concerts from the Iphone, through the A700, into the nonsmart Samsung TV. Seems most people are using an HDMI AND USB direct into a...
  19. Audio Theory, Setup, and Chat
    I have a problem with surround 5.1. I am using a bose acoustimas with yamaha amplifier . I have connected the projector to amplifier through a hdmi and from amplifier i connected to pc with another hdmi. when i change audio settings from pc to 5.1(surround) the sound comes only on the front 2...
  20. Receivers, Amps, and Processors
    Hello, I have recently switched to Yamaha and have two music cast capable receivers. Both these amplifiers are physically connected to my home network via an Ethernet cable. I have also setup one of the amps (the stereo unit) to access my FLAC music files on my home server. Now if I choose to...
Top