[Pastuch]

Projector: Benq W5000

Mount: Mustang 1 to 3 feet adjustable

Room Dimensions:

Length: 320"

Width: 114"

Height: 84"


Walls: All the walls will be a DARK purple. The ceiling is white tile but it is a matte finish. I may paint the ceiling once the projector is in place.


Screen will need to be at least 6 inches from ceiling due to a small window above the screen.


My plan is to paint the screen with the following:


~N9 DIY Tint {Light Gray}

Quart Custom Tint

Behr UPW (1850,4850)

0 4 0 Lamp Black

0 1 0 Brown Oxide

0 0 1 Yellow Oxide


I think I'm going to use 3 parts Behr 4850 and 1 part Minwax Clear Satin Polycrylic.

 

[tiddler]

I would go for the 110" screen.

I noticed you are thinking of mixing 3 parts 4850 with 1 part Minwax Clear Satin Polycrylic. I would NOT recommend this ratio for any paints that are not truly flat. The Behr 4850 has a low luster sheen so I only recommend 4 parts Behr 4850 with 1 part Minwax Clear Satin Polycrylic. If you were to opt for something like the CIL Smart3 Wash & Wear Ultra Flat (which is quite flat), then you would use the 3 to 1 ratio.

 

[MississippiMan]

Todd. I see your on board. This makes 24.



Oh yeah...I'll be using this shade in my test.

 

[tiddler]



Quote:
Originally Posted by MississippiMan /forum/post/16968409


Todd. I see your on board. This makes 24.

24 of what?

 

[MississippiMan]



Quote:
Originally Posted by tiddler /forum/post/16968704


24 of what?

Quote:
Originally Posted by kbgl /forum/post/16963214


It's got to be a record. MississippiMan has the most recent post in the twelve posts following this one. I'm sure 13 is on the way.

I responded in the Title / Header of this post;
http://www.avsforum.com/avs-vb/showt...1#post16963921



I thought you must of picked up on that. Selective retention perhaps?

 

[tbase1]

I have a 110" scope DIY screen.