AVS Forum banner

41 - 60 of 16738 Posts

·
Registered
Joined
·
220 Posts
Here are some of the settings I've been using for my PS3 and Xbox 360, each are connected to the TV directly. I use the PS3 for games, BD and DVD movie playback. The Xbox 360 is mainly for games. I came to these settings using AVCHD 700 (RC1), Avia, DVE (both DVD and Blu-ray versions), as well as some test pattern images loaded on to both my PS3 and 360. This page ( http://nicolaspeople.com/ch3rokeesblog/?p=13 ) described who should be using full range RGB. Their test image shows the 61A750 supports full range RGB. In this mode I had to set my TV's HDMI Black Level to Normal instead of Low, which would be used for limited RGB. These settings affect my PS3's XMB stuff and games. I am using Y Pb/Cb Pe/Cr for Blu-ray and DVD output on the PS3 along with Y Pb/Cb Pe/Cr Super White On. A couple of test images that you can use to adjust Brightness and Contrast for the PS3 XMB and games can be found here: http://sr-388.net/images/patterns/

PS3 connected via HDMI:


Mode: Movie

Contrast: 95

Brightness: 45

Sharpness: 0

Color: 49

Tint (G/R): G50/R50


Detailed Settings:

Black Adjust: Off

Dynamic Contrast: Off

LED Control: Auto (I have lowered it at night when watching movies if it is too bright)

Gamma: -3

White Balance: 0

Flesh Tone: 0

Edge Enhancement: Off

xvYCC: Off


Picture Options:

Color Tone: Warm1

Size: Just Scan

Digital NR: Off

DNIe (grayed out): Off

HDMI Black Level: Normal

Film Mode (grayed out): Off

Color Gamut :sRGB


My PS3 display settings:

Video Output Settings: 1080p

Cross Color Reduction Filter: Off

RGB Full Range (HDMI): Full

Y Pb/Cb Pr/Cr Super White (HDMI): On


My PS3 Blu-ray settings:

Cinema Conversion: Automatic

DVD Wide Display: Letterbox

DVD Upscaler: Normal

BD/DVD Video Output Format (HDMI): Y Pb/Cb Pe/Cr

BD 1080p 24 Hz Output (HDMI): On


Xbox360 connected via component (no HDMI on my 360):


Mode: Movie

Contrast: 95

Brightness: 45

Sharpness: 0

Color: 51

Tint (G/R): G49/R51


Detailed Settings:

Black Adjust: Off

Dynamic Contrast: Off

LED Control: Auto

Gamma: -3

White Balance: 0

Flesh Tone: 0

Edge Enhancement: Off

xvYCC (grayed out): Off


Picture Options:

Color Tone: Warm1

Size: Just Scan

Digital NR: Off

DNIe (grayed out): Off

HDMI Black Level (grayed out): Normal

Film Mode: Off

Color Gamut: sRGB


Xbox 360 Display Settings: 1080p. Black Level (only affects 480p output and DVD playback, which I don't use the 360 for) is currently set to Extended, only because it is correct with the brightness level of 45. The other two modes, while able to display blacker than black, required me to set the brightness to 30 for Standard and 38 for Intermediate, which was then too dark for the dashboard and games.


My Xbox360 output is set to 1080i. At 1080p using component output I had the TV lose sync/black out and come back on intermittently. Not a problem at 1080i though - Update: Firmware update 1005.3 has fixed this problem for me, my 360 works fine now at 1080p over component.


*5/25 - Updated some settings and added the note about firmware fixing Xbox360 1080p component interoperability.

*5/27 - Update details about why I seleted Full RGB for the PS3's XBM and games.
 

·
Registered
Joined
·
30 Posts
Well....with some reservations, I bought a 61A750 from the local BB. The price was good so I couldn't pass.


A bit of backstory: I had an HLS-5679...the original LED DLP. It was awesome (it was also 4 grand
). It had the power cycle problem and after a couple months of run-arounds, Samsung replaced it with an HLT5689. I saw red and green rainbows. A couple more months run-around and they bought it back. I went 3 months without a TV.



Now....I just hooked it up to my Yamaha rcver that has a Toshiba DVD player and two PS3s hooked to it. The picture is awesome right out of the box. I have a sliding glass door just to the left of the TV. Bright day......shades and door open and the TV still looks great. Now that the sun is down, its even more awesome. I wish I wasn't so tired so I could go back and watch all the Stargate SG-1 episodes all over again.
Best of all......I don't see any rainbow action!!!!!!!!! Samsung just might have won me back with this one.




I'll now be taking a look at the suggested settings and trying them out tomorrow.



I feel very............content.
 

·
Registered
Joined
·
7 Posts

Quote:
Originally Posted by Nullman /forum/post/13903361

Xbox360 connected via component (no HDMI on my 360):

I'll have to connect mine the same way when it arrives (Amazon shipped today, sked. delivery 5/29 - ugh!).


Since this will be my first HDTV (it's replacing an 8 y.o. Sony KP-61S70), just wondering how much improvement I can expect via component? The settings and the tip about 1080i are much appreciated too.
 

·
Registered
Joined
·
220 Posts

Quote:
Originally Posted by Kilrwolf /forum/post/13904813


just wondering how much improvement I can expect via component? The settings and the tip about 1080i are much appreciated too.

Oh my, it's going to be night and day. How exciting! My TV replaced a five year old HDTV, a Sony Grand Wega XBR LCD/RP, that cost nearly 4k and I notice a big difference in picture quality. One more thing, there is a swtich on the Xbox360 compnent cable, be sure it's set to HDTV. Now the long wait until the 29th..
 

·
Registered
Joined
·
714 Posts
Discussion Starter · #45 ·

Quote:
Originally Posted by Kilrwolf /forum/post/13904813


I'll have to connect mine the same way when it arrives (Amazon shipped today, sked. delivery 5/29 - ugh!).

Amazon shipped mine on Thursday, (returned my original set to Best Buy), with a delivery estimate of May 28th. Don't put too much stock in those delivery estimates, because mine is being delivered tomorrow between 9-1pm. :)
 

·
Registered
Joined
·
96 Posts

Quote:
Originally Posted by mike_pro /forum/post/13904929


Amazon shipped mine on Thursday, (returned my original set to Best Buy), with a delivery estimate of May 28th. Don't put too much stock in those delivery estimates, because mine is being delivered tomorrow between 9-1pm. :)

Cool, I am in the same boat as some other posters here with a scheduled date of 5-29. I was hoping to get this by this weekend.
 

·
Registered
Joined
·
33 Posts
For those who ordered it on big river: Do they deliver on weekends or after 5pm? Or is it dependant on the area? I'm too new at work to ask for time off, especially for a TV delivery



I've got a delivery window that ends on June 3rd, mine hasn't even shipped yet. **sigh**
 

·
Registered
Joined
·
388 Posts

Quote:
Originally Posted by JPOnion /forum/post/13905226


For those who ordered it on big river: Do they deliver on weekends or after 5pm? Or is it dependant on the area? I'm too new at work to ask for time off, especially for a TV delivery



I've got a delivery window that ends on June 3rd, mine hasn't even shipped yet. **sigh**

It depends on the local carrier. I ordered five days ago with a 12 day delivery time frame. Tracked it to my home town last night and got the call today confirming the best delivery time for me. Sometime between 9 and 11. Five days from order to door, and that counts the weekend. Not bad for free shipping.


My TV came from Big River's warehouse in PA and I live in Kansas City if that matters.
 

·
Registered
Joined
·
36 Posts
Waiting is killing me, how long does it usually take to ship a TV?


It was in Dallas (3 hrs away) all day yesterday, apparently it got here (Oklahoma) this morning at 6 o'clock. I hope the delivery people get it today so I can set up a delivery time for later today or tonight.


I am going to be pissed if it does not come until Thursday (the scheduled day) my home theater comes in tomorow, if I get that first I am going to stab someone.
 

·
Registered
Joined
·
714 Posts
Discussion Starter · #50 ·
I want to add a section to the FAQ on proper video settings for the PS3. Below is what I found to be the best settings. Seeking comments on it and other suggestions before I add it. Does anybody disagree with these settings, and why?

** Edited for corrections, now I believe RGB mode should be Limited and HDMI level low. Need to do more reading and testing tonight, hopefully other will confirm these settings. **

PS3 Recommended Display Settings:
From PS3 Settings->Display settings menu: (Note you can also adjust these while watching a movie by using the triangle button and going to the AV Display settings icon)
Y Pb/Cb Pr/Cr Super-White: On (Allows blacker than black and whiter than whites to be passed)
RGB Full Range: Limited (May be grayed out if using automatic above.) [Full is other choice]

PS3 Settings->BD/DVD Settings(Note you can also adjust this while watching a movie by using the triangle button and going to the AV Display settings icon)
BD/DVD Video Output Format (HMDI): Automatic [RGB, Y Pb/Cb Pr/Cr are other settings] Note that on Auto, for Blu Ray's, it will send video as Y Pb, and for games and the XMB dashboard it will be RGB.

TV Settings:
Detailed Settings:
--- xvYCC: Off (On seems to make no difference to me. Only devices that use this anyways are some camcorders)
Picture Options:
--- HDMI Black Level: Low

With the RGB Full Range set to Limited, then the HDMI Black Level in the TV's Picture Options menu should be set to Low. Note that it may be grayed out during Blu Ray play if you have Video output set to Automatic, as it seems to default to using the Y Pb/Cb Pr/Cr. To enable this menu item, you can set the PS3 video output format to RGB, and then you will be able to adjust this. Note that if everything is setup correctly, then there should be no difference between setting the PS3 output from RGB to Y Pb/Cb Pr/Cr. If there is, (i.e. the picture gets noticeably lighter or darker), then either the TV or the PS3 has an incorrect RGB range or HDMI black level setting. If you have the PS3 RGB range set to full, then the TV's HDMI Black Level should be set to Normal. However, this is only useful if you are connecting a PC source, and for connecting the PS3 to a TV, the correct setting is RGB limited.
 

·
Registered
Joined
·
388 Posts

Quote:
Originally Posted by JPOnion /forum/post/13905226


For those who ordered it on big river: Do they deliver on weekends or after 5pm? Or is it dependant on the area? I'm too new at work to ask for time off, especially for a TV delivery



I've got a delivery window that ends on June 3rd, mine hasn't even shipped yet. **sigh**

Mine arrived today. They put it exactly where I wanted it after unboxing. They offered to take the box away, but I chose to keep it. Just in case. I tracked it to my city on Monday, they called twice to confirm delivery time (9-11AM window), and showed up at 9:15AM this morning. Use the tracking tool on Big River and when it arrives locally expect a phone call and plan to have someone at home the next day.
 

·
Registered
Joined
·
103 Posts

Quote:
Originally Posted by BillyBeatnik /forum/post/13882404


Didn't know about the 360. Thanks for the info.


Component has been out way longer than 1080p and is probably not in the specifications. It will probably remain hit or miss as far as working. Since you can't upconvert regular DVDs over component (in most cases), and with everything moving to HDMI, I would not expect companies to try to upgrade an old technology.


Just my opinion though.

Lots of tvs and pc monitors accept 1080p over component. There is nothing magical about 1080p, its just another analog signal. PC monitors have been supporting higher resolutions than 1080p via component and vga years before the first 1080p HDTV sets started to appear. Most Samsung tvs that support 1080p input (including the 2007 LED sets) will accept 1080p over component with no issues. These 2008 sets also accept 1080p over component, but they tear and blank on occasion. That is what most people would say was a bug with this model, not some inherent issue with component. BTW, the PS3 is capable of outputting 1080p over component for games. In fact, the 20gb PS3 originally was going to ship without an HDMI port. When Sony was questioned about it by the press, they proudly proclaimed that component supported 1080p just fine.
http://www.gamepro.com/news.cfm?article_id=55089

It was only after they changed the 20gb model to have an HDMI port did they try to suggest that only HDMI could support 1080p. It was just simpler to say "If you want 1080p, you need HDMI" than to try to explain "1080p for games, 1080i for Blu-ray, 480p for DVDs when using component because Hollywood studios are a bunch of paranoid idiots".
 

·
Registered
Joined
·
13,080 Posts

Quote:
Originally Posted by mike_pro /forum/post/13908772

RGB Full Range: Full (May be grayed out if using automatic above.) [Limited is other choice]

Full - Uses PC levels (0-255)

Limited - Uses Video levels (16-235)
 

·
Registered
Joined
·
714 Posts
Discussion Starter · #55 ·

Quote:
Originally Posted by Charles R /forum/post/13910477


Full - Uses PC levels (0-255)

Limited - Uses Video levels (16-235)

Yeah, I know this. But, I figured that our displays are capable of 0-255, that that is what it should be set to. With this set, I then used the AVC HD disc (found here ) to adjust so that 16 and below is black and 235 and above is white. I think as long as you do that, then the setting is correct. Would you suggest otherwise? (In fact in Y Cb/Cr mode, I may change it to be Super white off, as I've found it a tad difficult to get contrast high enough so that whites above 235 are all the same)


What I'm not sure of, is if the brightness and contrast adjusted using the method described above is then appropriate for other sources, like cable or DVD. I need to test that, as I currently only use one input on the TV, and everything goes through the Onkyo 805 receiver. I may redo that so I use multiple inputs on the TV and can adjust the settings per input, which I think is really more ideal anyways.
 

·
Registered
Joined
·
13,080 Posts

Quote:
Originally Posted by mike_pro /forum/post/13910551


Yeah, I know this. But, I figured that our displays are capable of 0-255, that that is what it should be set to. With this set, I then used the AVC HD disc (found here ) to adjust so that 16 and below is black and 235 and above is white. I think as long as you do that, then the setting is correct. Would you suggest otherwise? (In fact in Y Cb/Cr mode, I may change it to be Super white off, as I've found it a tad difficult to get contrast high enough so that whites above 235 are all the same)

If you are displaying video encoded material Limited is the correct setting other wise you will be altering the image. There are many posts on the forums which explains the gory details.


Super White On allows the PS3 to display Blacker than Blacker and Whiter than White. Some content contains both which to keep things accurate they should be displayed accordingly.


Of course one is free to decide what one prefers versus maintaining an accurate image. I think the secret is setting both the PS3 and the set to how the source material is encoded. If all three aren't in sync the image will not be maintained.
 

·
Registered
Joined
·
698 Posts

Quote:
Originally Posted by BillyBeatnik /forum/post/13881152


I don't think that no 1080p over component is a bug. I'm not aware of any consumer TVs that will accept 1080p over component. Or any consumer source that will output 1080p over component. I don't know whether that is a digital issue or bandwidth issue or what.

so you didnt even google 1080p over component before you posted that or what
 

·
Registered
Joined
·
698 Posts

Quote:
Originally Posted by tallen94 /forum/post/13910237


Lots of tvs and pc monitors accept 1080p over component. There is nothing magical about 1080p, its just another analog signal. PC monitors have been supporting higher resolutions than 1080p via component and vga years before the first 1080p HDTV sets started to appear. Most Samsung tvs that support 1080p input (including the 2007 LED sets) will accept 1080p over component with no issues. These 2008 sets also accept 1080p over component, but they tear and blank on occasion. That is what most people would say was a bug with this model, not some inherent issue with component. BTW, the PS3 is capable of outputting 1080p over component for games. In fact, the 20gb PS3 originally was going to ship without an HDMI port. When Sony was questioned about it by the press, they proudly proclaimed that component supported 1080p just fine.
http://www.gamepro.com/news.cfm?article_id=55089

It was only after they changed the 20gb model to have an HDMI port did they try to suggest that only HDMI could support 1080p. It was just simpler to say "If you want 1080p, you need HDMI" than to try to explain "1080p for games, 1080i for Blu-ray, 480p for DVDs when using component because Hollywood studios are a bunch of paranoid idiots".

not trying to sound mean but (also not talking about you either the guy you quoted - BillyBeatnik)


exactly the guy who said he never herd of it and it isnt in the specs or something like that must not know what he is talking about, I wish people wouldnt just respond to something like that that not even doing a simple search to see if maybe TV's do accept 1080p over component, and things output it over component - less experienced readers might come across this and start spreading rumors to friends like sometimes I here about the massive problem with burn-in and how people I know wont get a Plasma because they herd this from someone that it is a big problem, but not so much anymore if you first take care of the TV in the first couple of weeks of having it - and some TV's have a refresh thingie to help "wash" this away


its simple all you got to do is google something first like say "1080p over component" before you respond saying "I don't think that no 1080p over component is a bug. I'm not aware of any consumer TVs that will accept 1080p over component. Or any consumer source that will output 1080p over component. I don't know whether that is a digital issue or bandwidth issue or what." - yea you just dont know what you are talking about period.
 

·
Registered
Joined
·
743 Posts

Quote:
Originally Posted by leftkidney /forum/post/13913634


so you didnt even google 1080p over component before you posted that or what

Apparently not good enough. I should certainly have researched what components output 1080p over component. And I should have checked what TVs can accept 1080p over component.


My point, though, was that 1080p is not currently in the component standards, although I believe changes have been submitted to add it to the standard. In the absence of 1080p in the component standard, I'm not sure it can be considered a bug if it does not work correctly all the time.
 

·
Registered
Joined
·
714 Posts
Discussion Starter · #60 ·

Quote:
Originally Posted by Charles R /forum/post/13912840


If you are displaying video encoded material Limited is the correct setting other wise you will be altering the image. There are many posts on the forums which explains the gory details.


Super White On allows the PS3 to display Blacker than Blacker and Whiter than White. Some content contains both which to keep things accurate they should be displayed accordingly.


Of course one is free to decide what one prefers versus maintaining an accurate image. I think the secret is setting both the PS3 and the set to how the source material is encoded. If all three aren't in sync the image will not be maintained.

So, you use/recommend RGB limited. What do you have for your TV's HDMI black level, Normal or Low? Seems like you would have to have it at Low to be correct.


After more reading, it seems RGB limited is what should be used, (even though on Automatic setting, it is moot as it will use Y Pb). Do you use Auto, Y Pb, or RGB?


It seems like what i did was use the combination of RGB Full, and black level limited, and used the AVCHD disk to adjust settings for white/black levels. I think I may have ended up with the same results, but with needless 0-255, 16-235 remapping. Not what i want for an accurate image.

I need to redo these settings and calibrations with RGB Limited, HMDI Black Level Low, and Superwhite on. I'll adjust my settings with AVCHD and check them out with some Blu Rays and games. (Aren't games typically RGB encoded? Not sure if this will make a difference, but maybe it will be handled by leaving it in Auto, and calibrating it for video space, which is my biggest concern).


Here's a great post explaining some of the settings.
http://www.avsforum.com/avs-vb/showt...7#post13048267
 
41 - 60 of 16738 Posts
Top