[kutlow]

I have 3 modded dts 10's and am wanting opinions on adding 2 othorns in the mix. I feel like the dts-10's although modded are not giving me good bass when playing music. Im also looking for more punch in movies as well. Im adding 2 othorns to integrate into my system. Here is a photo with measurements taken off data bass. These measurements are for one of each so keep in mind I have 3 LMSR DTS-10 and would be adding 2 Othorns.



I have not been able to run rew or Omni mic since I don't know how. I am going to buy a Omni mic and try to upload a picture of the response.


There are a few people on this forum who own the othorn and really like it. Im just wondering if adding the 2 othorns will be a waste. What are you guys thoughts?

 

[MKtheater]

Well, it would certainly give you 25hz and up! at 25hz dual Othorns would equal your 3 DTS-10r's so you will gain 6 dBs overall at 25hz and more than that above.

 

[kutlow]

Here is a chart showing one LMSR DTS-10 verses one Othorn 21.

http://s719.photobucket.com/user/kutlow/media/chart.jpg.html

 

[MKtheater]

That means you will gain 3 dBs at 25hz rather than 6. At 31.5 hz and above you will gain much more.

 

[kutlow]

so you say go for it right.

 

[kutlow]

I hope I can play all 5 at the same time. I need someone to run rew and set all this up. Shoot anyone near Alabama?

 

[MKtheater]

Honestly I would rather see two GH so you gain everywhere and not just midbass.

 

[coctostan]

Have you measured your response? It is unlikely that you lack output with two DTS-10s. It is more likely that you have response issues in the 50-150hz range causing you to feel like it is missing "punch".

 

[kutlow]



Quote:
Originally Posted by MKtheater  /t/1517276/3-danley-dts-10-modded-tc-sounds-lmsr-12-plus-2-othorn#post_24343305


Honestly I would rather see two GH so you gain everywhere and not just midbass.

I spent a lot modding these to sell them I think. I looked on data bass and 3 of these modded equals 2 GH. I guess.

 

[noah katz]



Quote:
Originally Posted by kutlow  /t/1517276/3-danley-dts-10-modded-tc-sounds-lmsr-12-plus-2-othorn/0_50#post_24343104


I feel like the dts-10's although modded are not giving me good bass when playing music. Im also looking for more punch in movies as well.


I have not been able to run rew or Omni mic since I don't know how. I am going to buy a Omni mic and try to upload a picture of the response.

Quote:
Originally Posted by coctostan  /t/1517276/3-danley-dts-10-modded-tc-sounds-lmsr-12-plus-2-othorn/0_50#post_24343397


Have you measured your response? It is unlikely that you lack output with two DTS-10s. It is more likely that you have response issues in the 50-150hz range causing you to feel like it is missing "punch".

Seems like this is a repeat of a thread some months back...

 

[kutlow]

Mk here is a graph with the GH added.



http://s719.photobucket.com/user/kutlow/media/dtsothgh.jpg.html

 

[Scott Simonian]



Quote:
Originally Posted by noah katz  /t/1517276/3-danley-dts-10-modded-tc-sounds-lmsr-12-plus-2-othorn#post_24343534



Seems like this is a repeat of a thread some months back...

Yeah. I'm having Deja Vu.

 

[kutlow]



Quote:
Originally Posted by noah katz  /t/1517276/3-danley-dts-10-modded-tc-sounds-lmsr-12-plus-2-othorn#post_24343534



Seems like this is a repeat of a thread some months back...

Yeah well I don't know how to run REW and no one from this site who does lives close enough.

 

[MKtheater]

I suggest the GH because it is DIY and anyone could get one built. Your DTS-10's are not available so getting 3 more of the same subs would be ideal. If you are selling the DTS-10's then I would think 4 GH's are your best options. You should not be having mid bass problems with 3 DTS-10's with LMSR's and Danley speakers. If you have a computer and a RS meter you can easily measure your response and be in the ballpark enough to figure things out. If you need to PM me and I will walk you through it. REW once setup is very easy.

 

[Scott Simonian]



Quote:
Originally Posted by kutlow  /t/1517276/3-danley-dts-10-modded-tc-sounds-lmsr-12-plus-2-othorn#post_24343630


Yeah well I don't know how to run REW and no one from this site who does lives close enough.

Omnimic?

 

[kutlow]

Im going to buy one

 

[FOH]

If you pick up OmniMic, this community here could step you through the process. OmniMic is so easy, literally within a few minutes you can be measuring ... its really that simple.


Now interpreting those measurements and what actions to take are key, and we could help with that.

 

[kutlow]

MK im not sure if you understand I would be keeping my 3 dts 10 and adding these 2 othorns. I wonder how they will blend in.

 

[Mrkazador]


Wouldn't the othorns and dts10 have different delays (path length)? How would that work out?

 

[MKtheater]

I know, I would build GH's so they all could cover the same range but measure first!