AVS Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
75 Posts
Discussion Starter · #1 ·
I'd like to connect an Audigy SZ to my Receiver for PC gaming.


Is there an online store that sell:

- 3M/9ft 6 channel analogue signal cable, with RCA in both ends or 3.5 minijack to RCA?

- all-in-one round shielded cable with pure/soft copper otherwize a little stiff maybe

- max $27



I've searched local radioshack stores and google and this forum, nothing.
 

·
Registered
Joined
·
1,102 Posts
See the L-com.com banner at the top of this group.


Use their cable selector menu, works great...


ps

If they don't have it; you don't need it!
 

·
Registered
Joined
·
75 Posts
Discussion Starter · #3 ·
Sorry I couldnt find anything. My local radioshack has this one:

http://jooh.no/5.1_cable/itec_5.1.jpg


costs $18 (129NOK) at www.clasohlson.no


it boasts very clean copper, and all wires are "into one" round cable.


Imported from Singapore the store told me, but they only have 1m available. They used to have a 3m version also.


Please anyone else have suggestion?
 

·
Registered
Joined
·
923 Posts
Just take a bunch of normal stereo cables of the length you need and heat shrink or just simply tape them together. Another option would be to take some CAT cable and attach your own connectors to it. Depending on your gear, you're likely not to hear any difference (you'd need higher end gear to reveal any differences that may be introduced in the signal due to using this non standard cabling method; I've not heard any between a Revo and a low end Pioneer receiver powering some old Fisher floor standers and compliment of newer model Monsoon panels for surrounds, nor over a set of Grado SR-80 headphones attached to the same receiver).


Just be creative. There's always more than a dozen ways to cable a solution.


Kensai
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top