i asked this ? before & was given http://home.attbi.com/~shawnfogg/.....but i get no responce to my e-mails.....any other 5 ch switches for dvd-a/sacd?
thank you for your time
thank you for your time
5 ch switch 4 dvd-a/sacd?
-
Not a Premium Member? Tell us why not. >>> Click Here to Take the Survey
-
Now Available: Tech Talk Podcast with Scott Wilkinson, Episode 19 Click here for details.
- Status
1 - 5 of 5 Posts
Joined
·
2,814 Posts
Just get two audio video switch boxes from RS or MCM. Cost will be about $20.
Steve
Steve
went to RS yesterday they only had 2ch switches...would need 3 ...... got 3 "Y" type audio jacks (red + wht tips)...plugged the dvd & the sacd into the 5.1 jacks on my pre/pro & tried both....doesn't sound very good....had to max out the volume on the pre/pro to come close to ref levels....much louder & more dynamic with direct connection.........I'm beginning to think a decent set of interconnects are in order.................i would actually need 5 sets of 6......& a 25' sub-woofer cable....would cost me more than i have into my speakers...... 
.....any new pre/pros w/ 2 sets of 5ch in?
thank you for your time
.....any new pre/pros w/ 2 sets of 5ch in?thank you for your time
Joined
·
2,814 Posts
If I understand you right you were running the Y adaptors into your prepro? If so, that probably wouldn't sound great.
This is an alternative to the RS switcher
http://mcm.newark.com/NewarkWebComme...jsp?id=50-6195
It has 3 RCS inputs, so you would need two.
The Sony TAP-9000ES and the Yamaha DSPE-492 both have two sets of 5.1 inputs. No longer mase, but can be found used.
Steve
This is an alternative to the RS switcher
http://mcm.newark.com/NewarkWebComme...jsp?id=50-6195
It has 3 RCS inputs, so you would need two.
The Sony TAP-9000ES and the Yamaha DSPE-492 both have two sets of 5.1 inputs. No longer mase, but can be found used.
Steve
Joined
·
744 Posts
1 - 5 of 5 Posts
- Status
Join the discussion
