AVS Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
1,892 Posts
Sure, it takes 5 digit codes, what are trying to program in? To enter code:


1. TV, STB, or AUX

2. press and hold SETUP for two blinks, release

3. enter 5 digit code



If you're reprogramming it for the AcessHd dtv converter:


1. STB

2. press and hold SETUP for two blinks, release

3. enter 0 2 1 8 5
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
hi,

what i want to do is use the remote with a different device.

i dont have the code to it.

can i manually search with this remote like you can with other universal remotes?

thank you
 

·
Registered
Joined
·
1,892 Posts
To do a codesearch:


1. tv, stb, aux

2. press and hold SETUP for two blinks, release

3. enter 9 9 1


4. enter 0- dtv, sat, or cable set-top-boxes

enter 1- tv's

enter 2- dvd's & vcr's

enter 3- audio devices


5. point the remote at the device, keep pressing and releasing CH UP key, if and when the device responds

6. press SETUP to lock in code
 

·
Registered
Joined
·
1,892 Posts
Sorry the only converter code this remote knows is the AccessHd code. but if yopu want to search:


1. press the stb device key

2. press and hold SETUP for two blinks, release

3. enter 9 9 1

4. enter 0

5. point the remote at the device, keep pressing and releasing CH UP key, if and when the converter responds

6. press SETUP to lock in code


In step 5 each press of ch up key gives off different power command, once you device responds, you press setup to lock it in. Remember there are many sat and cable brands, many having more then one code, so you could be pressing the ch up key for along time.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top