AVS Forum banner
1 - 1 of 1 Posts

7 Posts
Discussion Starter · #1 ·
Hello all, I am having trouble getting my sled to move into position. It won't move at all and never has - this is a new installation with a used lens/sled.

It's a Panamorph 380 anamorphic lens with a panamorph sled (branded for optoma) - the projector is a Panny AE4000u.

This is a little tricky as many things could be wrong.

1-projector trigger settings

2-little 1/8 th trigger cable could be broke

3-Panamorph sled might be malfunctioning

I've changed batteries on the sled remote and cannot get the projector to move or power on off with the remote. I am eliminating the remote for now as I want trigger anyways.

When plugged into the power adapter panamorph/optoma sled led blinks 3 times then dark.

I've tried 2 different trigger cables a mono and a stereo (trigger 1 and 2 respectively) - nothing.

Finally the panasonic AE4000U settings (in options)

- Top of (options/trigger page) says "off" ( I assume it says "on" when trigger is engaged as I cannot change that setting at all - ever)

-There is a list of trigger settings and I have selected "v-fit aspect"

I assume when I pick "v-fit aspect" manually (in the position/aspect menu)

the trigger should engage. When I go to just the stright up "options page" the trigger one displays "output"- it does not make the lens move.

The Panny manual is quite useless. HELP!

any ideas?

Thanks and have a great Christmas!
1 - 1 of 1 Posts