AVS Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
637 Posts
Depends.

If the motherboard supports the voltage needed for the video card. (1.5v or 3v)

If it does, it will run at 4x.
 

·
Registered
Joined
·
79 Posts
Discussion Starter · #3 ·
"AGP Signalling Voltages

Both the AGP slot on the motherboard and AGP video card must signal at the same voltage to function. Different speeds require different signalling voltages for operation. For example, AGP 8x signals at 0.8V, while AGP 1x can signal at 1.5V or 3.3V. Physical keys in the connector and slot dictate which signalling voltages the devices is capable of operating at. Speed Signalling Voltage:


1x/2x 1.5V or 3.3V

4x 0.8V or 1.5V

8x 0.8V "


RDave
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top